Description
Link the charger to a Deye inverter
The charger works on its own over Wi-Fi and the app. Linked to a Deye hybrid inverter such as the Deye SUN-10K-SG05LP3-EU-SM2, it follows solar production and the battery state. The link is provided by the Deye SUN-SMART-TX01 wireless transmitter connected to the inverter.
Technical data, protection and communication
| Model | Deye SUN-EVSE22K01-EU-AC |
|---|---|
| Type | AC charger for electric vehicles and plug-in hybrids |
| Maximum output power | 22 kW three-phase / 7 kW single-phase |
| Input current | 32 A |
| Input voltage | 230 V (single phase), 230/400 V (three phase) |
| Connection | L + N + PE or 3L + N + PE |
| Frequency | 50 Hz (45–55 Hz) / 60 Hz (55–65 Hz) |
| Charging connector | Type 2, 1 charging gun |
| Vehicle cable length | 4.2 m |
| Starting methods | Plug and Charge, charge after scanning, scheduled charging |
| Smart charging modes | By time, by battery SOC, solar-only |
| Communication | LoRa / Wi-Fi / Bluetooth (BLE) |
| App and monitoring | Deye Cloud and Solarman, real-time power monitoring and control |
| Inverter integration | Deye hybrid inverters over LoRa with the SUN-SMART-TX01 transmitter; control from the inverter display as well |
| On-device controls | Function button, LED strip, status, Wi-Fi and LoRa indicators |
| Leakage current protection | Type A and 6 mA DC detection |
|---|---|
| Surge protection | Type II |
| Further protection | Over-temperature, low temperature, over-voltage, under-voltage, short circuit, overload, earth fault |
| Operating temperature | −40 to +55 °C |
| Ambient humidity | 5–95%, non-condensing |
| Altitude | ≤ 3,000 m |
| Noise | < 25 dB |
| Ingress protection | IP66 |
| Cabinet size (W × H × D) | 104 × 264 × 57.5 mm |
| Weight | 3.7 kg |
| Mounting | Wall-mounted or free-standing use |
| MTBF | 100,000 h |
| In the box | Charger with cable and Type 2 connector, AC supply cable, connector holder, mounting hardware, manual |
| Standards | EN IEC 61851-1:2019, IEC 61851-1:2017, EN IEC 61851-21-2:2021, EN 300 220-2, EN 300 328, EN IEC 62311:2020, EN 301 489-1/-3/-17, EN IEC 61000-6-1:2019, EN IEC 61000-6-3:2021 |
A full tank from the roof
The biggest saving with an electric car happens at home, when the car runs on your own electricity. The Deye charger takes care of that by itself: in solar-only mode it sends the car just the power your solar array is producing in surplus and takes nothing from the grid. A second mode follows the home-battery state and a third follows the clock, so you charge in the cheapest hours of your tariff. You switch modes in the app or with the button on the charger.
22 kW on three phases, 7 kW on one
On a three-phase supply the charger delivers up to 22 kW at 32 A, adding more than a hundred kilometres of range per hour to a typical electric car. On a single-phase supply it charges at up to 7 kW. The same unit therefore serves a family house, a cabin or a business and adapts to your supply and to what the car’s on-board charger can take. The Type 2 connector is the European standard and fits electric cars and plug-in hybrids alike.
Plug in and charge
In Plug and Charge mode, charging starts by itself the moment you plug the connector into the car and stops when the battery is full. If you prefer to stay in control, start it from the app or set a schedule. The LED strip on the charger shows by colour what is happening, and separate indicators report Wi-Fi and LoRa status. The 4.2 m cable reaches the car’s socket whether you park nose-in or tail-in.
Smart control with a Deye inverter
With a Deye hybrid inverter, the charger becomes part of one system. The inverter knows how much the roof is producing, how much is in the battery and how much the house is drawing, and sends instructions to the charger wirelessly over LoRa. This is a long-range, low-latency link that also works without the internet. On the inverter side it needs the Deye SUN-SMART-TX01 transmitter. You can then start and stop charging from the inverter display too, for example on the Deye SUN-10K-SG05LP3-EU-SM2.
Deye Cloud app: an overview from anywhere
The charger has Wi-Fi with Bluetooth built in and connects straight to your home router. In the Deye Cloud or Solarman app you see power in real time, the charging session and its history, and you control charging remotely. On its own, without an inverter, it works as a regular smart charger managed from your phone.
IP66: outside the house, winter and summer
An IP66 rating means a dust-tight enclosure that withstands powerful water jets, so the charger can hang on the façade, by the driveway or under a carport. It operates from −40 to +55 °C and is quiet, with noise below 25 dB. The 104 × 264 × 57.5 mm enclosure weighs 3.7 kg and is barely noticeable on the wall. You can fix it to the wall or use it free-standing and take it with you.
Protection built into the charger
The charger has built-in Type A leakage protection with 6 mA DC detection and Type II surge protection. It also guards against over-temperature, low temperature, over-voltage, under-voltage, short circuit, overload and earth fault. It complies with EN IEC 61851-1 for EV charging systems, and the manufacturer states a mean time between failures of 100,000 hours.
Downloads
- Deye SUN-EVSE11K01/22K01-EU-AC charger manual (EN, PDF)
- Deye charger data sheet (EN, PDF)
- Product overview — Markdown (.md)
AI search description
The Deye SUN-EVSE22K01-EU-AC is an AC charger for electric vehicles and plug-in hybrids with a Type 2 connector. Maximum power is 22 kW on a three-phase 230/400 V supply and 7 kW on a single-phase 230 V supply; input current 32 A, connection L + N + PE or 3L + N + PE, frequency 50/60 Hz. The vehicle cable is 4.2 m long and the charger has one charging gun.
Charging can be started by Plug and Charge, after scanning a code, or on a schedule. Smart modes control charging by time, by home-battery state of charge, or from solar energy only. Communication: LoRa, Wi-Fi and Bluetooth; monitoring and control in the Deye Cloud and Solarman apps. It works with Deye hybrid inverters over LoRa via the SUN-SMART-TX01 transmitter and can also be controlled from the inverter display. On its own it works over Wi-Fi.
Protection: Type A leakage current with 6 mA DC detection, Type II surge protection, over-temperature, low temperature, over-voltage, under-voltage, short circuit, overload and earth fault. IP66 rating, operating temperature −40 to +55 °C, humidity 5–95% non-condensing, altitude up to 3,000 m, noise below 25 dB, MTBF 100,000 h.
Enclosure 104 × 264 × 57.5 mm, weight 3.7 kg, wall-mounted or free-standing use. Standards: EN IEC 61851-1:2019, IEC 61851-1:2017, EN IEC 61851-21-2:2021 and the related EMC and radio equipment standards.
Batterado — Deye SUN-EVSE22K01-EU-AC
https://batterado.com/en/product/deye-sun-evse22k01-eu-ac-22-kw-ev-charger/
Related: Deye SUN-SMART-TX01
https://batterado.com/en/product/deye-sun-smart-tx01-lora-transmitter/
Related: Deye SUN-10K-SG05LP3-EU-SM2
https://batterado.com/en/product/deye-sun-10k-sg05lp3-eu-sm2-10-kw-three-phase-hybrid-inverter/











Reviews
There are no reviews yet.