Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Deye SUN-SMART-TX01 — LoRa transmitter for Deye hybrid inverters

1 170 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

One small transmitter turns a Deye inverter into the wireless control centre of the house. The SUN-SMART-TX01 links the hybrid inverter over LoRa to an EV charger, up to ten smart switches and plugs and two current sensors, with no data cables to run. It reaches 200 metres and works without the internet.

  • compatible with all Deye hybrid inverters
  • 1 EV charger, 10 smart switches and plugs, 2 current sensors
  • LoRa 863–870 MHz, range of about 200 m
  • low latency and offline operation
  • built-in antenna, 5 V DC supply
  • IP65 once installed, operation from −40 to +60 °C

In stock

Enquiry

Description

What the transmitter connects

The transmitter plugs into a Deye hybrid inverter such as the Deye SUN-10K-SG05LP3-EU-SM2. At the other end of the wireless link sits the Deye SUN-EVSE22K01-EU-AC charger, which then charges the car according to solar production and the battery state.

Technical data and communication

ModelDeye SUN-SMART-TX01
TypeWireless transmitter (TX) for Deye hybrid inverters
CompatibilityAll Deye hybrid inverters
Supported devices10 smart switches or plugs, 2 current sensors (CT), 1 EV charger
CommunicationLoRa
Frequency range863–870 MHz
Communication distanceAbout 200 m in open space
AntennaBuilt-in, gain 0.56 dBi
Link propertiesLow latency, long range, offline operation
PairingQuick pairing with Deye hybrid inverters
Input voltage5 V DC
Operating temperature−40 to +60 °C
Ambient humidity0–100%
Ingress protectionIP20, IP65 after installation
Altitude4,000 m
Dimensions (W × H × D)137.8 × 31.3 × 31.3 mm
Weight45.8 g
StandardIEC/EN 62368-1

A wireless link with no cables to run

A hybrid inverter knows everything about the house: how much the roof is producing, how much is in the battery and how much you are drawing right now. The SUN-SMART-TX01 transmitter passes that knowledge on. You plug it into the inverter, pair it, and the inverter starts controlling the EV charger and smart switches and plugs wirelessly and reading data from current sensors. There is no chasing of walls and no data cable to pull to the garage or the far end of the house.

One transmitter, thirteen devices

One transmitter connects one EV charger, up to ten smart switches or plugs and two current sensors. The inverter can therefore route solar surplus step by step to the water heater, heat pump, pool filtration or air conditioning and charge the car from whatever is left. The transmitter is compatible with all Deye hybrid inverters, from our range for example the Deye SUN-10K-SG05LP3-EU-SM2.

LoRa: 200 metres and offline operation

The transmitter communicates using LoRa in the 863–870 MHz band. LoRa was designed for reliable long-distance links: in open space it reaches about 200 metres and gets through where home Wi-Fi does not. Latency is low and the link does not depend on a router or the internet, so load control keeps working when the connection is down.

Small, tough and quick to install

The transmitter measures 137.8 × 31.3 × 31.3 mm, weighs 45.8 g and has a built-in antenna. It is powered with 5 V straight from the inverter. Once installed it is rated IP65 and operates from −40 to +60 °C, so it withstands the same conditions as the inverter it belongs to. Pairing with the inverter takes moments. Together with the Deye SUN-EVSE22K01-EU-AC charger it gives you smart solar charging for your car.

Downloads

AI search description

The Deye SUN-SMART-TX01 is a wireless transmitter (TX) for Deye hybrid inverters. It is an accessory that plugs into the inverter; it does not store or convert energy itself. It links the inverter over LoRa to 1 EV charger, up to 10 smart switches or plugs and 2 current sensors (CT). The manufacturer states compatibility with all Deye hybrid inverters.

LoRa communication in the 863–870 MHz band, range of about 200 m in open space, built-in antenna with 0.56 dBi gain, low latency and offline operation. 5 V DC supply. Operating temperature −40 to +60 °C, humidity 0–100%, IP20 and IP65 after installation, altitude up to 4,000 m. Dimensions 137.8 × 31.3 × 31.3 mm, weight 45.8 g, standard IEC/EN 62368-1.

Typical use: controlling the Deye SUN-EVSE22K01-EU-AC charger and household loads according to solar production and battery state with the Deye SUN-10K-SG05LP3-EU-SM2 inverter and others.

Batterado — Deye SUN-SMART-TX01
https://batterado.com/en/product/deye-sun-smart-tx01-lora-transmitter/

Related: Deye SUN-10K-SG05LP3-EU-SM2
https://batterado.com/en/product/deye-sun-10k-sg05lp3-eu-sm2-10-kw-three-phase-hybrid-inverter/

Related: Deye SUN-EVSE22K01-EU-AC
https://batterado.com/en/product/deye-sun-evse22k01-eu-ac-22-kw-ev-charger/

Markdown — Deye SUN-SMART-TX01

Additional information

Weight0,0458 kg
Dimensions13,78 × 3,13 × 3,13 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop