Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Victron Energy Ekrano GX communication centre with 7-inch touchscreen display, VRM and VE.Can

17 530 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

The Ekrano GX is the most powerful Victron GX device with a built-in 7-inch touchscreen display: you can see and control the whole system on site, remotely through the VRM portal and via the built-in WiFi access point.

  • 1024 x 600 pixel display, up to 1000 cd/m² backlight, automatic dimming by ambient light.
  • VE.Bus, 2x VE.Can, 3x VE.Direct, 2x USB, Ethernet, WiFi and Bluetooth Smart.
  • Inputs for 3 resistive tank level senders, 2 temperature sensors and 2 digital inputs, 2 relays.
  • 8–70 V DC supply, flush panel mounting or blind hole mounting.

The Ekrano GX is the successor to the Color Control GX. The touch function can be disabled with a recessed button on the back to prevent unauthorised changes to the system.

In stock

Enquiry

Description

Technical data

BrandVictron Energy
ModelEkrano GX
Order codeBPP900480100
TypeGX communication centre with touchscreen display
Supply voltage8–70 V DC
Power draw, display on (100 % brightness)6.2 W @ 12 V | 6.6 W @ 24 V | 7.4 W @ 48 V
Power draw, display off2.6 W @ 12 V | 3.0 W @ 24 V | 3.7 W @ 48 V
Relay2x NO/NC; DC up to 30 V: 3 A; AC: 1 A, 125 V AC
Relay functionsRelay 1: alarm relay, generator start/stop, tank pump, temperature controlled relay or manual operation; Relay 2: temperature controlled relay or manual operation in the Relay menu (requires firmware 2.80 or higher)
VE.Direct ports (always isolated)3 (max. possible VE.Direct devices: 25)
VE.Bus (always isolated)1 bus with 2 paralleled RJ45 sockets
VE.Can 1Yes, isolated
VE.Can 2Yes, non-isolated
EthernetYes
WiFiYes, with built-in access point
Bluetooth SmartYes (for initial connection and network configuration, cannot be used to connect to other Victron products)
USB Host portsYes, 2x USB-A (max. 1.5 A @ 5 V combined)
MicroSD card slotYes, SDHC cards up to 32 GB
Resistive tank level inputs3 (European 0–180 Ω or US 240–30 Ω senders; tank senders are not supplied)
Temperature sense inputs2 (required sensor ASS000001000 Temperature Sensor QUA/PMP/Venus GX; range −20 to +70 °C, can measure up to 100 °C but does not withstand temperatures above 70 °C long-term; crude measurement, deviation of ±2 °C to be expected)
Digital inputs2 (open/closed monitoring of alarms, e.g. doors, fire or bilge alarms, and pulse counting)
Display resolution1024 x 600 pixels
Display size7 inch
Display max. backlight brightness1000 cd/m²
Backlight dimmingYes: dynamic via built-in ambient light sensor or manually via Remote Console; with timer for auto on/off
Touch toggle on/off buttonYes, recessed button on the back (prevents unauthorised use)
BuzzerYes
MountingPanel integrated flush mount or blind hole mount with included mounting accessories
Communication protocol: VE.BusYes
Communication protocol: VE.CanYes (2 ports)
Communication protocol: VE.DirectYes (3 ports)
Compatibility: remote accessVictron Remote Management (VRM) portal, Remote Console, VictronConnect app via the built-in WiFi access point
Compatibility: monitored devicesVictron devices with VE.Bus, VE.Direct and VE.Can, for example MPPT solar charge controllers, inverters/chargers and battery monitors
Outer dimensions without connectors and mounting accessories (h × w × d)124 x 187 x 29.8 mm
Operating temperature range−20 to +50 °C
Protection categoryFront: IP54 (when installed with steel bracket), IP31 (when installed with springs), back: IP21
Package contentsEkrano GX, steel bracket, springs and screws for mounting, terminal blocks, power cable with fuse
Standards: safetyIEC 62368-1
Standards: EMCEN 301489-1, EN 301489-17
Standards: automotiveECE R10-6

Ekrano GX: communication centre with display

According to Victron, the Ekrano GX represents the next generation of the GX product family and is the most powerful GX device to date. With its complete range of connections and interfaces it lets you keep control of your system from wherever you are and maximise its performance. You can access the system through the Victron Remote Management (VRM) portal, or directly using the built-in touchscreen or the VictronConnect app thanks to the built-in WiFi access point. The Ekrano GX is also the successor to the Color Control GX.

The device collects the data of all connected Victron products in one place: inverter/chargers, solar charge controllers, battery monitors, tank levels and temperatures. It is meant for fixed installations in houses, cabins, motorhomes, boats and technical rooms where you want an overview on the wall or in the switchboard.

Built-in 7-inch touchscreen display

The seven-inch display with a resolution of 1024 x 600 pixels and a maximum backlight brightness of 1000 cd/m² gives an instant overview of the system and allows settings to be adjusted. The backlight dims dynamically through the built-in ambient light sensor or manually via the Remote Console, and a timer can switch it on and off automatically.

The touch function can be disabled (or enabled) with a recessed button on the back to prevent unauthorised use. When mounted with the supplied steel bracket the display is watertight from the outside; the front protection category is IP54 with the steel bracket, IP31 when installed with springs and IP21 at the back. The device also has a buzzer for audible signalling.

  • 7-inch display, 1024 x 600 pixels.
  • Backlight up to 1000 cd/m², automatic and manual dimming.
  • Touch lock with a recessed button on the back.

Remote Console over VRM and the local network

With the Remote Console you can monitor, control and configure the Ekrano GX remotely over the internet, just as if you were standing in front of the device. The same function is also available on the local LAN or through the built-in WiFi access point.

Remote access suits systems that are not always in sight: a cabin, a motorhome, a boat or equipment in another building. You can check the status, adjust the current limit, start a generator or follow up on alerts without travelling to the site.

Monitoring and control of the system

The Ekrano GX instantly shows the battery state of charge, power consumption, power harvest from PV, generator and mains, tank levels and measured temperatures. You can easily control the shore power input current limit, (auto) start/stop generators and change any setting to optimise the system. Alerts can be followed up, diagnostic checks performed and complications resolved remotely.

Data is stored and displayed on the VRM portal, which is free of charge. The device works together with Victron products such as the Quattro, MultiPlus-II and Multi inverter/chargers, MPPT solar charge controllers and battery monitors.

  • State of charge, power and energy flows.
  • Control of input current limit and generator.
  • Tank levels and temperatures.

Connections: VE.Bus, VE.Can, VE.Direct, USB and network

The device has one VE.Bus bus with two paralleled RJ45 sockets, two VE.Can ports (VE.Can 1 isolated, VE.Can 2 non-isolated) and three VE.Direct ports, always isolated. Up to 25 VE.Direct devices can be connected. This is the total of directly connected devices, such as MPPT solar charge controllers, including devices connected over USB; the limit is mostly bound by CPU processing power.

The network connection is made via Ethernet or WiFi. Two USB-A ports (max. 1.5 A at 5 V combined) and a microSD card slot (SDHC up to 32 GB) complete the interfaces. Bluetooth Smart is intended for quick connection and network configuration in the VictronConnect app; it cannot be used to connect to other Victron products, for example SmartSolar charge controllers.

Inputs, outputs and relays

The IO terminal block offers three inputs for resistive tank level senders, two inputs for temperature sensors and two digital inputs. Victron does not supply tank senders. The inputs can be configured for European senders (0–180 Ω) or US senders (240–30 Ω).

The two temperature inputs measure all kinds of temperatures, but a suitable sensor is required; a suitable one is ASS000001000 Temperature Sensor QUA/PMP/Venus GX. The sensor range is −20 to +70 °C; it can measure up to 100 °C but does not withstand temperatures above 70 °C long-term, and it is a crude measurement with a deviation of ±2 °C. The digital inputs serve for open/closed monitoring of alarms (doors, fire or bilge alarms) and for pulse counting.

The two NO/NC relays handle DC up to 30 V at 3 A and AC 1 A at 125 V. Relay 1 can be programmed as an alarm relay, generator start/stop, tank pump, temperature controlled relay or for manual operation. Relay 2 as a temperature controlled relay or for manual operation (requires firmware 2.80 or higher).

Mounting, power supply and dimensions

The Ekrano GX installs easily through a cut-out for flush panel mounting and includes both a steel bracket and springs for blind hole mounting. All ports are easily accessible from the back. The power and relay terminal blocks can be screwed in place and the IO terminal block has a quick release clamp for easy access.

The supply voltage is 8–70 V DC, so the device can be powered from a 12 V, 24 V or 48 V system. Power draw with the display on at 100 % brightness is 6.2 W at 12 V, 6.6 W at 24 V and 7.4 W at 48 V; with the display off 2.6 W, 3.0 W and 3.7 W. Outer dimensions without connectors and mounting accessories are 124 x 187 x 29.8 mm (h x w x d), operating temperature −20 to +50 °C.

Installation and power wiring should follow the manufacturer’s manual and, where connected to an electrical installation, be carried out by a qualified person.

Combining with other Victron products

The Ekrano GX suits any installation where a display on site is wanted. It is typically combined with inverter/chargers such as the Quattro or MultiPlus-II (via VE.Bus), MPPT solar charge controllers (via VE.Direct or VE.Can) and battery monitors. Interfaces: VE.Bus, VE.Can and VE.Direct; which specific products and batteries work with it follows from the documentation of those products.

In a system with several devices the Ekrano GX serves as the single place for control, data display and upload to VRM. The connected devices are shown together on the display, and settings can be adjusted directly on the touchscreen or remotely.

Configuration and operation

The Bluetooth feature allows quick connection and configuration with the VictronConnect app; Bluetooth is intended for the initial connection and network setup. Once connected to the network, the device is available on the VRM portal and in the Remote Console. Standards: IEC 62368-1 (safety), EN 301489-1 and EN 301489-17 (EMC) and ECE R10-6 (automotive).

  • VictronConnect via the WiFi access point and Bluetooth.
  • VRM: remote monitoring, alerts and data history.
  • Remote Console: the same control as on the display.

AI search description

The Victron Energy Ekrano GX, order code BPP900480100, is a GX communication centre with a built-in 7-inch touchscreen display (1024 x 600 pixels, up to 1000 cd/m²) and the successor to the Color Control GX. Interfaces: VE.Bus, 2x VE.Can, 3x VE.Direct, 2x USB-A, Ethernet, WiFi with access point, Bluetooth Smart, microSD slot. Inputs for 3 resistive tank level senders, 2 temperature sensors and 2 digital inputs, 2 NO/NC relays. Supply 8–70 V DC, dimensions 124 x 187 x 29.8 mm, operating temperature −20 to +50 °C, front protection IP54 with steel bracket. Remote control through the VRM portal and the Remote Console.

Product page: https://batterado.com/product/victron-ekrano-gx/

Additional information

Weight0,8 kg
Dimensions12,4 × 18,7 × 3,0 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop