Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Victron Energy SmartSolar MPPT 150/100-Tr VE.Can Solar Charge Controller 100 A 150 V

16 050 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

A 100 A controller with a VE.Can interface for systems with a GX device: the SmartSolar MPPT 150/100-Tr VE.Can handles up to 5,800 W at 48 V from arrays up to 150 V, and up to 25 units can be linked on VE.Can.

  • Rated charge current 100 A, PV power 5,800 W at 48 V (1,450 W at 12 V).
  • PV open-circuit voltage up to 150 V (start-up and operation up to 145 V), PV short-circuit current up to 70 A.
  • Ultra-fast MPP tracking and detection of multiple maxima under partial shading.
  • Built-in Bluetooth and VE.Direct, VE.Can interface for up to 25 units.
  • 12 / 24 / 48 V batteries with automatic selection, adaptive multi-stage charging, 46 days of stored trends.

The blue RAL 5012 enclosure has IP43 (electronics) and IP22 (connection area) protection, measures 216 × 295 × 103 mm and weighs 4.5 kg. Screw terminals 35 mm² (Tr model), optional pluggable display.

In stock

Enquiry

Description

Technical data

BrandVictron Energy
ModelSmartSolar MPPT 150/100-Tr VE.Can
Order codeSCC115110411
TypeMPPT solar charge controller with built-in Bluetooth
Battery voltage12 / 24 / 48 V auto select (36 V: manual)
Rated charge current100 A
Nominal PV power at 12 V1,450 W
Nominal PV power at 24 V2,900 W
Nominal PV power at 36 V4,350 W
Nominal PV power at 48 V5,800 W
Max. PV open-circuit voltage (absolute maximum, coldest conditions)150 V
Max. PV voltage at start-up and operation145 V
Min. PV voltage to startVbat + 5 V, then at least Vbat + 1 V
Max. PV short-circuit current70 A
Max. efficiency98 %
Self-consumptionless than 35 mA at 12 V / 20 mA at 48 V
Absorption voltage (default)14.4 / 28.8 / 43.2 / 57.6 V
Float voltage (default)13.8 / 27.6 / 41.4 / 55.2 V
Equalization voltage (default)16.2 / 32.4 / 48.6 / 64.8 V (adjustable)
Charge algorithmmulti-stage adaptive (eight pre-programmed algorithms) or user defined
Temperature compensation−16 / −32 / −64 mV/°C
ProtectionPV reverse polarity, output short circuit, over temperature
PV terminalsscrew terminals 35 mm² / AWG2 (Tr model)
Battery terminals35 mm² / AWG2
Remote on/offyes (2 pole connector)
Programmable relayDPST; AC 240 V / 4 A, DC 4 A up to 35 V DC and 1 A up to 60 V DC
VE.Direct protocolyes, wired connection to a GX device, PC or other devices
Bluetooth protocolyes, built-in Bluetooth Smart (set-up, monitoring, updates, synchronisation)
VE.Can protocolyes, linking multiple controllers and connection to a GX device
Bluetooth battery sensingSmart Battery Sense, BMV-712 Smart Battery Monitor or SmartShunt (voltage, temperature, and current with BMV-712 and SmartShunt)
Optional displaySmartSolar pluggable LCD display (under the rubber seal)
Compatibility: GX devicesColor Control GX and other GX products
Compatibility: batteries12 / 24 / 48 V; recovers charging even after discharge to zero volts; reconnects a Li-ion battery with integrated disconnect
Compatibility: monitoringeach controller individually on a GX device and the VRM website (VE.Can) or on a smartphone or tablet (Bluetooth)
Parallel operationsynchronised via VE.Can (max. 25 units) or Bluetooth (max. 10 units)
Stored trends46 days: battery voltage, current and temperature, load output current, PV voltage and PV current
Coolingno cooling fan
Operating temperature−30 to +60 °C (full rated output up to 40 °C)
Humidity (non-condensing)95 %
Maximum altitude5000 m (full rated output up to 2000 m)
Environmental conditionindoor, unconditioned; pollution degree PD3
Colourblue (RAL 5012)
Protection categoryIP43 (electronic components), IP22 (connection area)
Dimensions (h × w × d)216 × 295 × 103 mm
Weight4.5 kg
Standards: safetyEN/IEC 62109-1, UL 1741, CSA C22.2

SmartSolar MPPT 150/100-Tr VE.Can solar charge controller: key benefits

The Victron Energy SmartSolar MPPT 150/100-Tr VE.Can (order code SCC115110411) is an MPPT solar charge controller for 12, 24 and 48 V batteries. Its rated charge current is 100 A and the maximum PV open-circuit voltage is 150 V in the coldest conditions. According to Victron, ultra-fast Maximum Power Point Tracking improves energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers, especially under a clouded sky when light intensity keeps changing.

Maximum efficiency exceeds 98 % and there is no cooling fan, so the controller runs silently with no moving parts. Built-in Bluetooth Smart is used to set up, monitor, update and synchronise the controllers, and the VE.Direct data port gives a wired connection to a GX device, PC or other devices. This model also has a VE.Can interface for larger systems and for connecting directly to a GX device over a CAN bus.

PV array power and voltage range

The nominal PV power depends on the battery voltage: 1,450 W at 12 V, 2,900 W at 24 V, 4,350 W at 36 V and 5,800 W at 48 V. If more PV power is connected, the controller limits the input power. The maximum PV short-circuit current is 70 A (at most 30 A per connector on MC4 models; this Tr model has screw terminals). An array with a higher short-circuit current may damage the controller.

The PV open-circuit voltage must not exceed the absolute maximum of 150 V in the coldest conditions; the maximum at start-up and in operation is 145 V. To start, the PV voltage must exceed the battery voltage by 5 V, after which at least Vbat + 1 V is enough. The 150 V input suits shorter panel strings; the number of series panels should be chosen so that the open-circuit voltage at the lowest temperature stays below 150 V.

Battery charging and charge algorithm

The controller uses a multi-stage adaptive algorithm with eight pre-programmed settings selectable with a rotary switch, or a fully programmable user-defined algorithm. Default absorption voltage is 14.4 / 28.8 / 43.2 / 57.6 V, float 13.8 / 27.6 / 41.4 / 55.2 V and equalization 16.2 / 32.4 / 48.6 / 64.8 V for a 12 / 24 / 36 / 48 V battery. Values can be adjusted with the rotary switch, the display, VE.Direct or Bluetooth.

The internal temperature sensor compensates the absorption and float voltage for temperature, at −16 / −32 / −64 mV/°C. More accurate data can come from an optional Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt, which pass battery voltage and temperature (and current, for the BMV-712 and SmartShunt) over Bluetooth. The recovery function starts charging even if the battery has been discharged to zero volts, and reconnects a Li-ion battery with an integrated disconnect function.

Tracking under shading, and protection

Under partial shading, several maximum power points may appear on the power-voltage curve. Conventional controllers can lock to a local maximum that is not the optimum. The SmartSolar algorithm therefore looks for the optimum point and keeps energy harvest as high as possible.

The controller protects against PV reverse polarity, output short circuit and over-temperature, and derates power when the temperature is high. Full rated output is available up to 40 °C and the operating range is −30 to +60 °C. Self-consumption is below 35 mA at 12 V and 20 mA at 48 V, so the controller practically does not load the battery at night. Safety standards: EN/IEC 62109-1, UL 1741 and CSA C22.2.

Communication: VE.Direct, Bluetooth and VE.Can

VE.Direct is a wired connection to GX devices, a PC and other Victron devices. Bluetooth Smart is built in, so the controller can be set up, monitored and updated in the VictronConnect app from a phone or tablet without a cable. The VE.Can interface is a CAN bus for systems with several controllers: up to 25 units can be linked and synchronised, and each controller can be monitored individually on a GX device and on the VRM website.

Remote on/off (2 pole connector) can be used, for example, to connect to a VE.Bus BMS. The DPST programmable relay (AC 240 V / 4 A, DC 4 A up to 35 V DC and 1 A up to 60 V DC) can be programmed to trip on an alarm or other events.

Integration into a system with a GX device and VRM

For central monitoring the controller connects to a GX device (Color Control GX and other GX products), which collects data from all parts of a Victron system and shows them locally and on the VRM portal. For the SmartSolar MPPT 150/100-Tr VE.Can, the VE.Can bus is intended for this: controllers are daisy-chained on one line and the GX device sees each of them separately, which suits larger PV arrays and systems with storage. Up to 25 controllers can be linked on one VE.Can line.

In a Victron system with an inverter and battery (including ESS systems), the PV side supplies data on array power, voltage and current and on charge state, from which the GX device builds an overview of the energy flows.

Parallel operation and multiple controllers

Parallel synchronised operation is possible over VE.Can (max. 25 units) or Bluetooth (max. 10 units). Synchronised controllers charge the battery in the same stage of the charge cycle, so the power is shared among the units; each controller still needs its own PV array.

When sizing, start from the nominal power of 5,800 W for a 48 V battery and the current of 100 A per unit. For a higher charge current, add another controller with its own array rather than connecting panels to one input beyond the short-circuit current of 70 A.

Installation, construction and ambient conditions

The controller sits in a blue (RAL 5012) enclosure with IP43 protection for the electronics and IP22 for the connection area, intended for an indoor, unconditioned environment with pollution degree PD3 and humidity up to 95 % non-condensing. Dimensions are 216 × 295 × 103 mm (h × w × d) and weight is 4.5 kg. The PV array and the battery both use 35 mm² (AWG2) screw terminals. Maximum altitude is 5000 m, full output up to 2000 m.

Installation must be carried out by a qualified person following the manufacturer’s manual; this includes correct protection of the array and the battery and cables sized for the rated current. The pluggable display is connected after removing the rubber seal on the front.

Operation, monitoring and configuration

Configuration is possible with the rotary switch (eight presets), the optional SmartSolar display, or over VE.Direct or Bluetooth in the VictronConnect app. The controller stores trends for 46 days: battery voltage, current and temperature, load output current, and PV voltage and current.

On a GX device or on the VRM portal you can follow the output and status of the SmartSolar MPPT 150/100-Tr VE.Can and of the individual units on a shared VE.Can line. A fully programmable charge profile is available to adapt the algorithm to a specific battery type.

AI search description

Victron Energy SmartSolar MPPT 150/100-Tr VE.Can (order code SCC115110411) is an MPPT solar charge controller with built-in Bluetooth for 12/24/48 V batteries. Charge current 100 A, PV power 5,800 W at 48 V, PV open-circuit voltage up to 150 V, efficiency up to 98 %, no cooling fan. Communication VE.Direct and Bluetooth, VE.Can for up to 25 units; connects to Victron GX devices. 35 mm² screw terminals, IP43/IP22, 4.5 kg, dimensions 216 × 295 × 103 mm. Use: PV systems with battery storage.

Product page: https://batterado.com/product/victron-smartsolar-mppt-150-100-tr-ve-can/

Additional information

Weight4,5 kg
Dimensions21,6 × 29,5 × 10,3 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop