Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Victron Energy SmartSolar MPPT 100/30 Solar Charge Controller 30 A, 12/24 V Battery, PV up to 100 V

3 860 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

An MPPT controller for 12 or 24 V batteries with a rated current of 30 A: the Victron Energy SmartSolar MPPT 100/30 handles a PV array of up to 440 W at 12 V and 880 W at 24 V.

  • PV input up to 100 V, array short-circuit current up to 35 A.
  • Ultrafast MPPT and advanced detection under partial shading.
  • Eight pre-programmed charge algorithms and full programmability.
  • Bluetooth and VE.Direct for GX devices, efficiency 98 %.

The 130 × 186 × 70 mm fanless case weighs 1.3 kg and delivers full output up to 40 °C. It is the middle model of the 100/xx range for caravans, boats and smaller off-grid or back-up systems with a 12/24 V battery.

In stock

Enquiry

Description

Technical data

BrandVictron Energy
ModelSmartSolar MPPT MPPT 100/30
Order codeSCC110030210
TypeMPPT solar charge controller with Bluetooth
Battery voltage (auto select)12/24 V
Rated charge current30 A
Nominal PV power at 12 V440 W
Nominal PV power at 24 V880 W
Max. PV open circuit voltage100 V
Max. PV short circuit current35 A
PV start conditionThe PV voltage must exceed Vbat + 5 V to start; afterwards the minimum is Vbat + 1 V
Limit with excess PV powerIf more PV power is connected, the controller limits the input power
Maximum efficiency98 %
Self-consumption12 V: 30 mA, 24 V: 20 mA
Charge voltage “absorption” (default, adjustable)14.4 V / 28.8 V
Charge voltage “float” (default, adjustable)13.8 V / 27.6 V
Charge algorithmmulti-stage adaptive; eight pre-programmed algorithms selectable with a rotary switch; fully programmable
Temperature compensation−16 mV/°C (12 V), −32 mV/°C (24 V)
Fully discharged battery recoveryStarts charging even if the battery has been discharged to zero volts; reconnects to a fully discharged Li-ion battery with integrated disconnect function
Temperature sensorInternal temperature sensor compensates absorption and float voltage; optional external battery voltage and temperature sensing via Bluetooth
Power terminals16 mm² / AWG6
Data communication portVE.Direct
Communication: VE.Directwired data connection to a Color Control GX, other GX products, PC or other devices
Communication: Bluetooth Smartbuilt-in; wireless set-up, monitoring, update and synchronisation of SmartSolar charge controllers
Compatibility: GX devices and PCColor Control GX and other GX products, PC or other devices via VE.Direct
Compatibility: Bluetooth battery sensingSmart Battery Sense or BMV-712 Smart Battery Monitor (battery voltage and temperature for one or more SmartSolar charge controllers)
Partial shadingadvanced Maximum Power Point Detection (BlueSolar algorithm) locks to the optimum MPP even if several maxima are present on the power-voltage curve
Cooling and output at temperatureno cooling fan; full output current up to 40 °C, power derating when temperature is high
Ultrafast MPPTunder changing cloud cover it improves energy harvest by up to 30 % compared to PWM controllers and by up to 10 % compared to slower MPPT controllers
ProtectionPV reverse polarity / output short circuit / over temperature; PV reverse current protection
Operating temperature−30 to +60 °C (full rated output up to 40 °C)
Humidity95 %, non-condensing
Colourblue (RAL 5012)
Protection categoryIP43 (electronic components), IP22 (connection area)
Dimensions (h × w × d)130 × 186 × 70 mm
Weight1.3 kg
Stored trendsbattery voltage, current and temperature, PV voltage and PV current
Number of days trends data is stored46
Standards: safetyEN/IEC 62109-1, UL 1741, CSA C22.2

A 30 A MPPT controller for 12 and 24 V batteries

The Victron Energy SmartSolar MPPT 100/30 is a charge controller with a rated current of 30 A for 12 and 24 V batteries. In the 100/xx range it is the middle step: the 100/20 suffices for a smaller array, the 100/50 serves a larger one. PV array power is 440 W at 12 V and 880 W at 24 V.

The controller selects the battery voltage itself (12/24 V), handles PV voltages up to 100 V and reaches a peak efficiency of 98 %. The 130 × 186 × 70 mm enclosure has no fan and weighs 1.3 kg; the same enclosure is shared by the other model of the 100/xx range, so the two cards differ mainly in current and power.

Like all SmartSolar controllers it has built-in Bluetooth for set-up and monitoring from a phone and a VE.Direct port for connection to a GX device.

PV array: 100 V and power for 30 A

The maximum open-circuit voltage of the PV array is 100 V and the short-circuit current must not exceed 35 A. A higher short-circuit current may damage the controller, so when designing the array you check both the string voltage in cold conditions and the array current.

Nominal PV power is 440 W at 12 V and 880 W at 24 V. If more power is connected, the controller limits the input power. To start, the PV voltage must exceed the battery voltage by 5 V; after that, 1 V above the battery is enough.

With a 24 V battery the controller handles an array of up to 880 W, but at a lower current than with a 12 V battery: at double the voltage half the current delivers the same power. The array short-circuit current may reach 35 A on this model, up to 60 A on the larger 100/50.

This model works only with 12 and 24 V batteries. For a 48 V battery the range offers the 100/20-48 V (up to 20 A) or the 150/45 with a higher PV voltage.

Ultrafast MPPT and partial shading

Under changing cloud cover, when light intensity is changing continuously, ultrafast MPPT improves energy harvest by up to 30 % compared to PWM controllers and by up to 10 % compared to slower MPPT controllers.

With partial shading, two or more maxima appear on the power-voltage curve. Conventional MPPT controllers often lock to a local maximum that may not be the best one. The BlueSolar advanced Maximum Power Point Detection always aims for the optimum maximum, which keeps the yield up even when a chimney, a tree or a cloud shades part of the array.

The controller has no fan and delivers full output current up to 40 °C. At higher temperature it reduces power so that it does not overheat; efficiency exceeds 98 %.

Battery charging and settings

The charge algorithm is multi-stage adaptive. The default absorption voltage is 14.4 V / 28.8 V and float 13.8 V / 27.6 V for 12 / 24 V, both adjustable. The algorithm is fully programmable and eight pre-programmed algorithms are selected with a rotary switch on the controller; see the manufacturer’s manual for the overview.

The internal temperature sensor compensates absorption and float voltage by −16 mV/°C at 12 V and −32 mV/°C at 24 V. Battery voltage and temperature can be sent to the controller wirelessly by a Smart Battery Sense or a BMV-712 Smart Battery Monitor, one for several SmartSolar controllers.

The controller starts charging even a battery discharged to zero volts and reconnects to a fully discharged Li-ion battery with an integrated disconnect function. Self-consumption is 30 mA at 12 V and 20 mA at 24 V.

Typical use for a 30 A current

With 30 A the 100/30 suits medium installations: caravans and boats with several panels, garden houses, smaller off-grid and back-up systems with a 12 or 24 V battery. Anyone planning an array of roughly up to 440 W at 12 V or 880 W at 24 V will manage with this model.

If the array is to be considerably larger, move up to the 100/50, which charges at 50 A. With a smaller array it is pointless to pay for a higher current, and the 100/20-48 V is the choice only when the battery is 48 V.

The advantage of the middle size is balance: the enclosure and terminals are the same as on the larger model, so a later increase in array power can be handled by swapping the controller for a 100/50 without changing the dimensions of the mounting spot.

System connection: VE.Direct and GX devices

Through the VE.Direct port a cable connects the controller to a Color Control GX and other GX products, to a PC or to other devices. The GX device collects data from the controller and other system components and provides a remote overview through the VRM portal.

The controller works on the DC side between the PV array and the battery. Data on yield, battery voltage and charging state can therefore be followed in one place together with data from the other devices in the system.

With the MPPT 100/30 you do not have to deal with battery communication over a CAN bus: the data port is VE.Direct only, and battery values are supplied, if wanted, by a Smart Battery Sense or BMV-712 Smart over Bluetooth.

Bluetooth, VictronConnect and stored trends

The built-in Bluetooth Smart is used for wireless set-up, monitoring, update and synchronisation of SmartSolar controllers. On a phone or tablet you see the instantaneous PV power, battery voltage and current and the charging state, and you can change charging parameters.

The controller stores trends for 46 days: battery voltage, current and temperature, and PV voltage and current. After a week or a month you can see how the array performed in different weather.

For long-term and remote monitoring use a GX device with the VRM portal; for a check on site the app is enough.

Installation, terminals and protection

The power terminals accept wires up to 16 mm² (AWG6), which is sufficient even for the full 30 A. Protection category is IP43 for the electronics and IP22 for the connection area, so it is intended for a dry space. The operating temperature is −30 to +60 °C, full output up to 40 °C, humidity up to 95 % non-condensing.

The controller is protected against PV reverse polarity, output short circuit, over temperature and reverse current from the battery into the PV array. Dimensions (h × w × d) are 130 × 186 × 70 mm, weight 1.3 kg, colour blue RAL 5012. Safety standards: EN/IEC 62109-1, UL 1741, CSA C22.2.

Wire it according to the manufacturer’s manual, with protection and conductors sized for the current. Installation and wiring should be carried out by a suitably qualified person.

AI search description

The Victron Energy SmartSolar MPPT 100/30 (order code SCC110030210) is an MPPT solar charge controller with Bluetooth for 12/24 V batteries with automatic voltage selection. Rated charge current 30 A, PV power 440 W at 12 V and 880 W at 24 V, open-circuit PV voltage up to 100 V, short-circuit current up to 35 A, efficiency 98 %. Ultrafast MPPT, advanced detection under partial shading, eight pre-programmed charge algorithms selectable with a rotary switch. VE.Direct communication with GX products and Bluetooth, battery sensing via Smart Battery Sense or BMV-712 Smart. IP43, fanless, 1.3 kg. Use: medium off-grid and back-up systems with a 12/24 V battery.

Product page: https://batterado.com/product/victron-smartsolar-mppt-100-30/

Additional information

Weight1,3 kg
Dimensions13,0 × 18,6 × 7,0 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop