Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Victron Energy SmartSolar MPPT 150/45-Tr Solar Charge Controller 45 A, 12/24/48 V Battery, PV up to 150 V

6 610 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

An MPPT controller with PV voltage up to 150 V for 12, 24 or 48 V batteries: the Victron Energy SmartSolar MPPT 150/45-Tr charges at 45 A and handles an array of up to 2,600 W at 48 V.

  • Array voltage 150 V in the cold, 145 V for start-up and operation, short-circuit current up to 50 A.
  • Battery 12/24/48 V automatically, 36 V with a software tool.
  • Ultrafast MPPT, advanced detection under shading, eight pre-programmed algorithms.
  • Bluetooth and VE.Direct for GX devices, efficiency 98 %.

The 130 × 186 × 70 mm fanless case weighs 1.25 kg and the terminals accept wires up to 16 mm². The higher array voltage allows longer panel strings; it suits larger off-grid and back-up systems with a 48 V battery.

In stock

Enquiry

Description

Technical data

BrandVictron Energy
ModelSmartSolar MPPT 150/45-Tr
Order codeSCC115045212
TypeMPPT solar charge controller with Bluetooth
Battery voltage (auto select)12/24/48 V (auto select; software tool needed to select 36 V)
Rated charge current45 A
Nominal PV power at 12 V650 W
Nominal PV power at 24 V1,300 W
Nominal PV power at 36 V1,950 W
Nominal PV power at 48 V2,600 W
Max. PV open circuit voltage150 V absolute maximum in coldest conditions; 145 V start-up and operating maximum
Max. PV short circuit current50 A
PV start conditionThe PV voltage must exceed Vbat + 5 V to start; afterwards the minimum is Vbat + 1 V
Limit with excess PV powerIf more PV power is connected, the controller limits the input power
Maximum efficiency98 %
Self-consumption12 V: 20 mA, 24 V: 15 mA, 48 V: 10 mA
Charge voltage “absorption” (default, adjustable)14.4 V / 28.8 V / 43.2 V / 57.6 V
Charge voltage “float” (default, adjustable)13.8 V / 27.6 V / 41.4 V / 55.2 V
Charge algorithmmulti-stage adaptive (eight pre-programmed algorithms selectable with a rotary switch); fully programmable
Temperature compensation−16 mV / −32 mV / −64 mV per °C (12 / 24 / 48 V)
Fully discharged battery recoveryStarts charging even if the battery has been discharged to zero volts; reconnects to a fully discharged Li-ion battery with integrated disconnect function
Temperature sensorInternal temperature sensor compensates absorption and float voltage; optional external battery voltage and temperature sensing via Bluetooth
Power terminals16 mm² / AWG6
Data communication portVE.Direct
Communication: VE.Directwired data connection to a Color Control GX, other GX products, PC or other devices
Communication: Bluetooth Smartbuilt-in; wireless set-up, monitoring, update and synchronisation of SmartSolar charge controllers
Compatibility: GX devices and PCColor Control GX and other GX products, PC or other devices via VE.Direct
Compatibility: Bluetooth battery sensingSmart Battery Sense or BMV-712 Smart Battery Monitor (battery voltage and temperature for one or more SmartSolar charge controllers)
Partial shadingadvanced Maximum Power Point Detection (BlueSolar algorithm) locks to the optimum MPP even if several maxima are present on the power-voltage curve
Cooling and output at temperatureno cooling fan; full output current up to 40 °C, power derating when temperature is high
Ultrafast MPPTunder changing cloud cover it improves energy harvest by up to 30 % compared to PWM controllers and by up to 10 % compared to slower MPPT controllers
ProtectionPV reverse polarity / output short circuit / over temperature; PV reverse current protection
Operating temperature−30 to +60 °C (full rated output up to 40 °C)
Humidity95 %, non-condensing
Colourblue (RAL 5012)
Protection categoryIP43 (electronic components), IP22 (connection area)
Dimensions (h × w × d)130 × 186 × 70 mm
Weight1.25 kg
Stored trendsbattery voltage, current and temperature, PV voltage and PV current
Number of days trends data is stored46
Standards: safetyEN/IEC 62109-1, UL 1741, CSA C22.2

An MPPT controller with higher PV voltage for batteries up to 48 V

The Victron Energy SmartSolar MPPT 150/45-Tr differs from the smaller controllers of the range mainly in its input voltage: the PV array may reach 150 V in the coldest conditions and 145 V at start-up and in operation. This is combined with a battery voltage of 12, 24 or 48 V (36 V too, after setting with a software tool) and a charge current of 45 A.

The higher array voltage allows more panels in a single string, which lowers currents and cable losses between array and controller. The controller handles up to 650 W at 12 V, 1,300 W at 24 V, 1,950 W at 36 V and 2,600 W at 48 V.

The 130 × 186 × 70 mm fanless case weighs 1.25 kg, peak efficiency exceeds 98 % and full output current is available up to 40 °C.

PV array: long strings and the voltage rules

With this model, distinguish two voltage limits. The absolute maximum of 150 V applies in the coldest conditions, when panel voltage is highest. For start-up and operation the maximum is 145 V. The open-circuit voltage of the series string at the lowest expected temperature must therefore not exceed these limits.

To start, the PV voltage must exceed the battery voltage by 5 V; after that, 1 V above the battery is enough. With a 48 V battery the controller thus needs about 53 V and operates over a wide range up to 145 V while charging, which gives great freedom in choosing the number of panels in series.

The array short-circuit current may reach 50 A; a higher value might damage the controller. If more power than nominal is connected, the controller limits the input power.

12, 24 and 48 V batteries and charging

The controller detects the battery voltage automatically: 12, 24 or 48 V. A software tool is needed to select 36 V. The default absorption voltage is 14.4 / 28.8 / 43.2 / 57.6 V and float 13.8 / 27.6 / 41.4 / 55.2 V, both adjustable.

The charge algorithm is multi-stage adaptive with eight pre-programmed algorithms selectable with a rotary switch, and it is fully programmable, so it can be adapted to lead-acid or lithium batteries according to the battery manufacturer’s recommendation.

Temperature compensation is −16 mV/°C at 12 V, −32 mV/°C at 24 V and −64 mV/°C at 48 V. The internal temperature sensor can be replaced by battery sensing over Bluetooth: a Smart Battery Sense or a BMV-712 Smart Battery Monitor sends battery voltage and temperature to one or more controllers.

Discharged battery: the controller starts charging even from zero volts and reconnects to a fully discharged Li-ion battery with an integrated disconnect function.

Ultrafast MPPT and partial shading

Under changing cloud cover, ultrafast MPPT improves energy harvest by up to 30 % compared to PWM controllers and by up to 10 % compared to slower MPPT controllers.

With long strings, partial shading shows up particularly strongly, because several maxima form on the power-voltage curve. The BlueSolar advanced Maximum Power Point Detection algorithm always finds the optimum maximum instead of locking to a local one.

At high temperature the controller reduces power so that it does not overheat. The controller’s own consumption is low: 20 mA at 12 V, 15 mA at 24 V and 10 mA at 48 V.

Typical use for a 45 A current and a 150 V array voltage

The 150/45 aims at medium-sized and larger systems where the array stands far from the controller or has many panels in series: house roofs, cottages, off-grid and back-up supply, and boats or caravans with a 48 V battery. A high array voltage saves copper on the wiring.

At 48 V the controller reaches 2,600 W, more than the smaller controllers of this range with voltages up to 100 V can. The 150/45 is therefore the logical next step when you feed a larger array or longer strings into a 48 V battery.

For a smaller array with a lower voltage the 100/30 or 100/50 suffice, but they work only with 12 and 24 V. For a small array with a 48 V battery there is the 100/20-48 V with a load output.

System connection: VE.Direct and GX devices

Through the VE.Direct port a cable connects the controller to a Color Control GX and other GX products, to a PC or to other devices. The GX device collects data from the controller and other components and provides a remote overview through the VRM portal.

The controller works on the DC side between the PV array and the battery, so you see its yield and charging data in one place together with the other devices of the system.

Because the controller also works with 48 V batteries, it suits systems with a GX device, where the whole system including the battery can be monitored.

Bluetooth, VictronConnect and stored trends

The built-in Bluetooth Smart is used for wireless set-up, monitoring, update and synchronisation of SmartSolar controllers. The mobile app shows the instantaneous PV power, battery voltage and current and the charging state and lets you change charging parameters.

The controller stores trends for 46 days: battery voltage, current and temperature, PV voltage and current. From them you see how long strings perform in different light and whether the array delivers the expected power.

For long-term and remote monitoring use a GX device with the VRM portal.

Installation, terminals and protection

The power terminals accept wires up to 16 mm² (AWG6), so they handle the full 45 A even with heavy cables. Protection category is IP43 for the electronics and IP22 for the connection area, so the controller is intended for a dry space. The operating temperature is −30 to +60 °C, full output up to 40 °C, humidity up to 95 % non-condensing.

The controller is protected against PV reverse polarity, output short circuit, over temperature and reverse current. Dimensions (h × w × d) are 130 × 186 × 70 mm, weight 1.25 kg, colour blue RAL 5012. Safety standards: EN/IEC 62109-1, UL 1741, CSA C22.2.

Wire it according to the manufacturer’s manual, with protection and conductors sized for the current and the array voltage. Installation and wiring should be carried out by a suitably qualified person.

AI search description

The Victron Energy SmartSolar MPPT 150/45-Tr (order code SCC115045212) is an MPPT solar charge controller with Bluetooth for 12/24/48 V batteries with automatic voltage selection (36 V with a software tool). Rated charge current 45 A, PV power 650 W at 12 V, 1,300 W at 24 V, 1,950 W at 36 V and 2,600 W at 48 V, PV voltage 150 V absolute maximum, 145 V for start-up and operation, short-circuit current up to 50 A, efficiency 98 %. VE.Direct communication with GX products and Bluetooth, battery sensing via Smart Battery Sense or BMV-712 Smart. IP43, fanless, 1.25 kg. Use: larger systems with long panel strings and a 48 V battery.

Product page: https://batterado.com/product/victron-smartsolar-mppt-150-45/

Additional information

Weight1,25 kg
Dimensions13,0 × 18,6 × 7,0 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop