Description
Technical specifications
| Modules / array rating | 12 × 410 Wp = 4.92 kWp |
|---|---|
| Module technology | Full-black mono PERC, half-cell |
| Module dimensions | 1722 × 1134 × 30 mm |
| Module weight | 21.5 kg |
| 12-module weight — calculated | 258 kg |
| Combined module face area — calculated | ≈23.43 m² |
| Mounting configuration | 1 aluminium tile-roof mounting set |
| PV cable | 100 m; 1 × 4 mm²; 1000 V DC; 50 m black + 50 m red |
| Connectors / DC equipment | 10 MC4; 2 DC disconnects; 1 DC breaker |
| Tools / bonding | 1 tool set; 12 grounding jumpers |
|---|---|
| Module packaging | 1800 × 1200 × 500 mm; 290 kg |
| Mounting packaging | 2400 × 200 × 200 mm; 20 kg |
| Cable/accessory packaging | 2 × (430 × 320 × 180 mm; 15 kg) |
| Module certifications stated | CE; TÜV |
| Module product warranty | 12 years |
| Module performance warranty | 30 years |
| Mounting warranty | 10 years |
| Associated electrical components | Separately selected inverter; optional battery storage |
4.92 kWp for your own generation
The kit contains twelve photovoltaic modules rated at 410 Wp each. Their combined 4920 Wp is the installed peak rating of the PV array. Actual energy generation in kWh depends on sunlight, orientation, tilt, shading and temperature. Module placement and electrical string length are therefore designed for the specific roof. Generated electricity can supply the property and, through a suitable hybrid inverter, charge a selected battery system.
Full-black half-cell modules
The modules use monocrystalline PERC technology and a half-cell layout. Their full-black finish gives the array a consistent appearance. Each module measures 1722 × 1134 × 30 mm and weighs 21.5 kg. Twelve modules total 258 kg and approximately 23.43 m² of module face area; these calculations support initial space planning. Mounting gaps, roof margins and access routes determine the actual roof area required.
Mounting, cabling and accessories
An aluminium mounting set is supplied for tile roofs. Cabling comprises 50 m of black and 50 m of red single-core PV cable, 4 mm², rated at 1000 V DC. Accessories comprise ten MC4 connectors, two DC disconnects, one DC circuit breaker, one installation-tool set and twelve grounding jumpers. Component placement and electrical sizing follow the array design.
Choose the inverter and storage separately
The PV kit is the generation part of the system. Select a separate inverter with an appropriate MPPT range, voltage limit and input current rating. String design uses the electrical specifications of the actual module and the site design minimum temperature. A hybrid system additionally pairs battery voltage, communication profile and charge/discharge power. Battery capacity in kWh follows appliance consumption and operating duration.
Roof or solar carport
The 1722 × 1134 × 30 mm module size matches one supported KSENG V2.2 carport format. A carport installation uses its own mounting structure and the module count shown in its drawing: KSENG V2.2 has fifteen positions, while this kit contains twelve modules. Fifteen 410 Wp modules form a 6.15 kWp array. That project configuration has its own supply scope, with the inverter and optional storage selected as separate components.
Transport and installation planning
Module packaging measures 1800 × 1200 × 500 mm and weighs 290 kg. Mounting components are packed at 2400 × 200 × 200 mm and 20 kg. The source offer groups cable and installation accessories into two packages of 430 × 320 × 180 mm, each weighing 15 kg. These dimensions and weights support unloading, site access and material preparation.
Downloads
Complete product overview — Markdown
AI search description
Nacyc Energy NACYC-PV-12X410 is the PV generation portion of an electricity system: twelve full-black half-cell mono PERC modules rated at 410 Wp each, totalling 4.92 kWp. Each module measures 1722 × 1134 × 30 mm and weighs 21.5 kg. The kWp rating describes the array; energy generation in kWh depends on sunlight over time and the installation site.
This offer comprises modules, one aluminium tile-roof mounting set, 100 m of 4 mm²/1000 V DC PV cable split into 50 m black and 50 m red, ten MC4 connectors, two DC disconnects, one DC breaker, one tool set and twelve grounding jumpers. The inverter and battery are separately selected products for the electrical system.
Select the inverter by PV string voltage/current, MPPT range, required AC output and phase count. Pair the battery to that inverter by voltage and communication profile, then size its energy by consumption and runtime. The 4.92 kWp array rating does not itself specify the AC appliance output or stored battery energy.
Module dimensions match the 1722 mm KSENG V2.2 carport option. Mechanical planning must use the actual count: twelve modules in this kit and fifteen carport positions. Fifteen such modules provide 6.15 kWp and use the carport mounting system. Batterado can combine the generation, structural and electrical components into a specific project.
Reviews
There are no reviews yet.