Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Felicity Solar FLA48280TG2-EU Low-voltage battery LiFePO4 14.3 kWh 51.2 V CAN RS485 Wi-Fi

61 814 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

A 14.3 kWh TG2 battery with Wi-Fi and Bluetooth: the Felicity FLA48280TG2-EU offers 51.2 V, LiFePO4 cells, CAN and RS485, 8,000 cycles and can be connected in parallel up to 15 units.

  • Nominal voltage 51.2 V, energy 14.3 kWh
  • Continuous charge and discharge current 150 A, peak 200 A (15 s)
  • Cycle life of at least 8,000 cycles, depth of discharge at least 95 %
  • Up to 15 units in parallel, series connection is not supported
  • Communication: CAN 2.0, RS485, Wi-Fi, Bluetooth, RJ45 port
  • Ingress protection IP21, floor-standing (chassis with casters)
  • Dimensions 435 × 880 × 247 mm, weight 118.5 kg, manufacturer warranty 10 years

The enclosure measures 435 × 880 × 247 mm and weighs 118.5 kg. It stands on the floor and has a chassis with casters. It differs from the FLA48280-EU in the datasheet parameters (200 A peak, 7,700 W, 8,000 cycles, Wi-Fi and Bluetooth). The manufacturer does not support series connection.

In stock

Enquiry

Description

Technical data

BrandFelicity Solar
ModelFLA48280TG2-EU
TypeLow-voltage battery unit (FLA series)
ChemistryLiFePO4
Nominal voltage51.2 V
Operating voltage44.8–57.6 V
Nominal energy14.3 kWh
Max. continuous charge / discharge current150 A (depends on temperature and SOC)
Peak current (15 s)200 A
Max. charge / discharge power7,700 W
Depth of discharge (DoD)≥ 95 %
Cycle life≥ 8,000 cycles (at 25 °C)
Parallel connectionUp to 15 units
Cell typeLiFePO4
ProtectionBuilt-in smart BMS, circuit breaker, fuse, MX+OF
Series connection of unitsNot supported
Communication portRJ45 (8 pins), CAN / RS485
Port pinout (battery side)1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH
Wiring on the Felicity inverter side (RS485)5 RS485-B, 6 RS485-A
Communication (datasheet)CAN 2.0, RS485, Wi-Fi, Bluetooth
DisplayLCD + LED
Felicity inverters / RS485pin 5 RS485-B, pin 6 RS485-A
Inverters of other brands / CANpins 3 CANL-PCS, 4 CANH-PCS, 7 CANL, 8 CANH
Other brandsthe manufacturer states compatibility with leading inverter brands (CAN communication)
Compatible invertersFelicity inverters, inverters of leading brands according to the manufacturer, and others
Ingress protectionIP21
InstallationFloor-standing (chassis with casters)
Charging temperature0 to +55 °C
Discharging temperature−20 to +55 °C
Storage temperature0 to +35 °C
Product dimensions435 × 880 × 247 mm
Net weight118.5 kg
Gross weight140.5 kg
Package dimensions960 × 555 × 450 mm
Manufacturer warranty10 years
Certification: electromagnetic compatibilityCE-EMC, certificate of conformity SZNTC2602052EV00 (Shenzhen NTC, 28 Feb 2026; EN IEC 61000-6-1:2019, 61000-6-2:2019, 61000-6-3:2021, 61000-6-4:2019)
Certification: transportUN38.3 (test summary)
Certification: chemical safety and transportGHS, safety data sheet (MSDS), classification for road and sea transport

Low-voltage LiFePO4 battery 14.3 kWh

The Felicity Solar FLA48280TG2-EU is a low-voltage LiFePO4 battery with a nominal voltage of 51.2 V and a nominal energy of 14.3 kWh from the FLA-EU series, in the variant marked TG2. It is a separate model alongside the FLA48280-EU: the same energy of 14.3 kWh, but different datasheet parameters. The TG2 has a peak current of 200 A for 15 s, a power of 7,700 W, a cycle life of at least 8,000 cycles at 25 °C, CAN 2.0, RS485, Wi-Fi and Bluetooth communication and an LCD with LED indication. It is lighter (118.5 kg against 135 kg) and narrower.

The battery is intended for residential and small commercial photovoltaic systems with an inverter for a 48 V battery voltage. The continuous charge and discharge current is 150 A. The enclosure measures 435 × 880 × 247 mm and stands on the floor; a chassis with casters makes it easier to move. The depth of discharge is at least 95 % and the manufacturer warranty is 10 years.

Voltage, current and power

The operating voltage of the battery is 44.8–57.6 V at a nominal voltage of 51.2 V. The maximum continuous charge and discharge current is 150 A; the manufacturer notes that it depends on temperature and state of charge. The battery can deliver a peak current of 200 A for 15 s. According to the datasheet the maximum charge and discharge power is 7,700 W.

When units are connected in parallel, their currents and power add up while the voltage stays the same, because the units are placed side by side and not in series. According to the manufacturer the depth of discharge is at least 95 %, so a large share of the nominal 14.3 kWh is actually usable. When selecting an inverter, compare its maximum charge and discharge current with the values of the battery so that neither side limits the other. The limits of 57.6 V and 44.8 V define the window in which the inverter charges and discharges the battery.

Cycle life and temperature range

According to the manufacturer datasheet the battery reaches at least 8,000 cycles (at 25 °C). A depth of discharge of at least 95 % makes a large part of the nominal energy usable in every cycle. At one cycle per day this corresponds to many years of operation.

Temperature range

  • charging: 0 to +55 °C
  • discharging: −20 to +55 °C
  • storage: 0 to +35 °C

According to the series manual the most suitable ambient temperature is 20–30 °C, with relative humidity of 5–95 % and an altitude of up to 2,000 m. For long-term storage the manual recommends recharging the battery to more than 80 % at least once every 6 months.

Parallel connection and capacity expansion

Capacity can be increased by connecting units in parallel: the manufacturer states up to 15 units. Two units, for example, have 28.6 kWh together and a continuous current of 300 A.

Series connection of units is not supported. For a parallel system the manual recommends a combiner box (BTCB series) or a copper busbar, which distributes the current evenly between the units. The parallel DIP switch sets the battery addresses on the communication bus. According to the manual the start-up order is inverter, battery breaker, button; in a parallel system switching on one battery switches on all of them.

Communication and port wiring

The communication port is an RJ45 connector with eight pins (battery side):
1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH.

For Felicity inverters RS485 communication is used, which on the inverter side uses pins 5 (RS485-B) and 6 (RS485-A). For inverters of other brands the manufacturer specifies CAN communication, that is pins 3 CANL-PCS, 4 CANH-PCS, 7 CANL and 8 CANH. The datasheet of this model lists CAN 2.0, RS485, Wi-Fi and Bluetooth communication. Wi-Fi and Bluetooth serve for remote monitoring of the battery data.

The round LCD on the front shows the battery status; LED indication complements it.

How to choose the inverter and communication

The right choice of inverter decides whether the battery can use its full output and whether the system can control charging according to the state of the cells. Proceed as follows:

  • Voltage: the battery has a nominal voltage of 51.2 V and works in the range 44.8–57.6 V, so it belongs to the 48 V class.
  • Current and power: compare the charge and discharge current of the inverter with the continuous current of 150 A of one unit and with the number of batteries connected in parallel.
  • Communication: Felicity inverters communicate with the battery over RS485; inverters of other brands over CAN. The manufacturer states compatibility with leading inverter brands.
  • Protocol:

If the inverter does not communicate with the batteries, the charge and discharge voltage and current limits are set manually according to the battery manual. Communication is preferable, because the inverter then receives the real state of charge and the current limits from the BMS.

Installation, ingress protection and construction

The unit measures 435 × 880 × 247 mm and weighs 118.5 kg, 140.5 kg packed. The unit stands on the floor; in the photographs it has a chassis with casters and, on the side, a breaker, a POWER button and recessed handles. The ingress protection is IP21 is suited to installation in dry indoor rooms.

The package measures 960 × 555 × 450 mm.

Protection and safety

The battery contains a built-in smart BMS which monitors the voltage, current and temperature of the cells and protects them against overcharge, over-discharge, overcurrent and short circuit. A circuit breaker, a fuse and an MX+OF module (auxiliary breaker contacts for remote status signalling) are included. According to the datasheet the fuse is external.

Certification and warranty

For the FLA48280TG2-EU there is a CE-EMC certificate of conformity no. SZNTC2602052EV00, issued by the Shenzhen NTC laboratory on 28 February 2026 according to EN IEC 61000-6-1:2019, EN IEC 61000-6-2:2019, EN IEC 61000-6-3:2021 and EN IEC 61000-6-4:2019 (immunity and emissions in residential, commercial and industrial environments). There is also a UN38.3 test summary, the GHS classification, the safety data sheet (MSDS) and documents for road and sea transport.

The manufacturer warranty is 10 years. The warranty conditions are given in the manufacturer warranty information. The data in this description come from the manufacturer datasheet and user manual; the manufacturer reserves the right to change parameters as part of continuous development.

AI search description

The Felicity FLA48280TG2-EU is a low-voltage LiFePO4 battery, 51.2 V, 14.3 kWh, operating voltage 44.8–57.6 V. Continuous charge and discharge current 150 A, peak 200 A for 15 s, power 7,700 W, depth of discharge at least 95 %, cycle life at least 8,000 cycles at 25 °C. Up to 15 units in parallel, series connection is not supported. CAN 2.0, RS485, Wi-Fi and Bluetooth communication (RJ45 port), LCD + LED display. BMS, breaker, fuse, MX+OF, ingress protection IP21. Floor installation, 435 × 880 × 247 mm, 118.5 kg. CE-EMC certificate SZNTC2602052EV00. Warranty 10 years. A separate model alongside the FLA48280-EU.

Product page: https://batterado.com/product/felicity-fla48280tg2-eu/

Additional information

Weight118,5 kg
Dimensions43,5 × 88,0 × 24,7 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop