Description
Technical data
| Brand | Deye |
|---|---|
| Model | SE-G5.1 Pro-B |
| Chemistry | LiFePO4 |
| Nominal voltage | 51.2 V |
| Capacity | 100 Ah |
| Nominal energy | 5.12 kWh |
| Usable energy at recommended DoD 90% | 4.6 kWh |
| Operating voltage | 43.2–57.6 V |
| Recommended charge / discharge current | 50 A |
| Max. charge / discharge current | 100 A |
| Peak current (2 min, 25 °C) | 150 A |
| Built-in breaker | 125 A, 2P, 60 Vdc |
| Cycle life | 6,000 cycles (25 ±2 °C, 0.5C / 0.5C, 90% DoD, 70% EOL) |
| Charge temperature | 0 to +55 °C (optional heating: −20 to +55 °C) |
| Discharge temperature | −20 to +55 °C |
| Storage temperature | 0 to +35 °C |
| Humidity / altitude | 5–95% / up to 2,000 m |
| Protection degree | IP20 |
| Communication | CAN 2.0 / RS485 |
| Communication port | PCS (RJ45): CAN 2.0 (500 kbit/s) and RS485 (9600 Bd) |
| Deye / CAN | Deye CAN protocol (Lithium Mode 00) |
| Parallel setup | Up to 64 units (327 kWh), of which 32 units without further setup; mode 1 up to a 12 kW inverter (4 batteries), mode 2 above 12 kW |
|---|---|
| Compatible inverters | Low-voltage Deye hybrid inverters per the official list DY-LV48-0132 (19 Oct 2026): single-phase SUN-(3.6–10)K-SG05LP1-EU-AM2-P, SUN-…-SG01LP1 / SG03LP1 / SG04LP1-EU, three-phase SUN-…-SG04LP3-EU and other low-voltage series on the list. |
| Indication | LED (5 × SOC, 3 × status) |
| Installation | Wall, floor or 19″ rack (cabinet depth 600 mm) |
| Parallel connection | Up to 64 units (327 kWh); up to 32 without external setup |
| Dimensions (W × H × D) | 440 × 133 × 540 mm |
| Weight | approx. 45 kg |
| Certification | UN38.3, IEC 62619, CE, UK, VDE 2510-50, CEI 0-21, FCC, UL1973, UL9540A |
| Manufacturer warranty | 10 years per the datasheet; per the manufacturer 5 to 10 years depending on the final installation site (Deye warranty policy) |
A 5.12 kWh module for rack or wall
The Deye SE-G5.1 Pro-B is a low-voltage LiFePO4 module, 51.2 V / 100 Ah, 3U high (133 mm). Nominal energy is 5.12 kWh; at the manufacturer’s recommended 90% depth of discharge the datasheet gives 4.6 kWh of usable energy. The 3U height and 440 mm width fit a 19-inch rack.
Currents and communication
Recommended charge and discharge current is 50 A, maximum 100 A and peak 150 A for 2 minutes at 25 °C. The built-in breaker is rated 125 A / 60 Vdc. Communication runs over CAN 2.0 or RS485, and LEDs show status (5 × SOC and 3 × state).
Inverter compatibility
On the official Deye list DY-LV48-0132 the SE-G5.1 Pro-B battery is listed with CAN communication and the inverter setting Lithium Mode 00. The same low-voltage Deye hybrid inverters are compatible as with the other SE batteries: single-phase SUN-(3.6–10)K-SG05LP1-EU-AM2-P, the SG01LP1 / SG03LP1 / SG04LP1-EU series and three-phase SG04LP3-EU.
How to choose an inverter and communication
Inverter: Choose a low-voltage Deye hybrid inverter from the list DY-LV48-0132 and set Lithium Mode 00 (Deye CAN) on the inverter.
Communication: The PCS port (RJ45) carries CAN 2.0 (500 kbit/s) and RS485 (9600 Bd). Up to 64 modules (327 kWh) can be connected in parallel, 32 of them without further setup. Mode 1 is used up to a 12 kW inverter (4 batteries), mode 2 above 12 kW.
CAN carries state of charge, voltage and current limits from the battery to the inverter; on the Deye inverter it is enough to select Lithium Mode 00 (Deye CAN). RS485 serves as a second communication path over the same PCS port. The list of compatible inverters follows the official Deye list, so the setting matches the manufacturer recommendation.
Expansion
Modules can be paralleled: up to 32 without an external solution, up to 64 with it (327 kWh). According to the manufacturer brochure, 12 kW and 15 kW inverters are supported with 3 to 12 batteries in parallel. The number of modules and the currents must be designed together with the inverter.
Dimensions, weight and operating conditions
Dimensions are 440 × 133 × 540 mm, weight approximately 45 kg, and IP20 protection is intended for indoor use. Charging is possible at 0 to +55 °C (from −20 °C with the optional heating), discharging at −20 to +55 °C and storage at 0 to +35 °C.
Certification and warranty
The manufacturer lists UN38.3, IEC 62619, CE, UK, VDE 2510-50, CEI 0-21, FCC, UL1973 and UL9540A. The datasheet states a 10-year warranty, the brochure 5 to 10 years depending on the final installation site; the Deye warranty policy applies.
AI search description
The Deye SE-G5.1 Pro-B is a low-voltage LiFePO4 module, 51.2 V / 100 Ah, nominal energy 5.12 kWh (4.6 kWh usable at 90% DoD), 3U for a 19-inch rack or wall. Recommended current 50 A, max. 100 A, peak 150 A (2 min), 125 A breaker. CAN 2.0 and RS485. Up to 64 modules in parallel (327 kWh). 440 × 133 × 540 mm, approx. 45 kg, IP20. 6,000 cycles. UN38.3, IEC 62619, CE, VDE 2510-50, CEI 0-21, UL1973, UL9540A certification. Warranty 5 to 10 years depending on the installation site.
Product page: https://batterado.com/product/deye-se-g5-1-pro-b/










Reviews
There are no reviews yet.