Description
Technical data
| Brand | Felicity Solar |
|---|---|
| Model | FLB48314TG1-H |
| Chemistry | LiFePO4 |
| Nominal voltage | 51.2 V |
| Capacity | 314 Ah |
| Nominal energy | 16 kWh |
| Operating voltage | 44.8–57.6 V |
| Recommended charge / discharge current | 80 A |
| Max. continuous charge / discharge current | 160 A (depends on temperature and state of charge) |
| Peak current (15 s) | 300 A |
| Depth of discharge (DoD) | ≥ 95 % |
| Cycle life | ≥ 8,000 cycles (25 ±2 °C, 0.5C, 90% DoD, 70% EOL) |
| Charge and discharge temperature | −20 to +55 °C (built-in heating) |
| Storage temperature | 0 to +35 °C |
| Humidity / altitude | 5–95% / ≤ 2,000 m |
| Protection degree | IP65 |
| Communication | RS485 / CAN |
| Communication port | RJ45 (8 pins): CAN and RS485 |
| Port pinout (battery side) | 1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH |
| Wiring on the inverter side | pins 3 CANL, 4 CANH, 5 RS485-B, 6 RS485-A; CAN is on pins 3/4, wire the cable according to this table |
| Victron / CAN | CAN communication per the Felicity manual |
| Solis / CAN | CAN communication per the Felicity manual |
| SOFAR / CAN | CAN communication per the Felicity manual |
| SolaX / CAN | CAN communication per the Felicity manual |
| Sol-Ark / CAN | CAN communication per the Felicity manual |
|---|---|
| Megarevo / CAN | CAN communication per the Felicity manual |
| Luxpower / CAN | CAN communication per the Felicity manual |
| Deye / RS485 | RS485 communication per the Felicity manual |
| Parallel setup | Up to 32 batteries (512 kWh) via a Felicity BTCB0606 / BTCB0303 combiner box or a busbar; series connection is not supported |
| Without communication (manual inverter setting) | max. charging voltage 57.6 V, float voltage 57.6 V, cut-off voltage 44.8 V, recommended charging current 80 A, max. 160 A × number of batteries |
| Compatible inverters | Victron, Solis, SOFAR, SolaX, Sol-Ark, Megarevo, Luxpower (CAN), Deye (RS485) and more. |
| Monitoring | Wi-Fi / Bluetooth (FSolar app) |
| Display | LED |
| Parallel connection | Up to 32 units (512 kWh) |
| Protection | Built-in smart BMS, breaker and fuse |
| Fire protection | Aerosol fire-extinguishing system |
| Installation | Floor-mounted |
| Dimensions | 450 × 235 × 895 mm |
| Net weight | 121 kg |
| Package dimensions | 548 × 424 × 958 mm |
| Shipping weight | 143 kg |
| Certification | UN38.3 (transport of lithium batteries) |
| Manufacturer warranty | 10 years under the manufacturer warranty policy |
Sixteen kilowatt-hours in one floor-standing unit
The Felicity FLB48314TG1-H combines 16 LiFePO4 cells in series (51.2 V) with a capacity of 314 Ah. The result is 16 kWh of nominal energy for shifting daytime photovoltaic production into the evening and night. Depth of discharge is at least 95%, so a large part of the nominal energy is available for use. The battery connects to a suitable low-voltage inverter with a battery voltage range of 44.8–57.6 V.
Heated version for charging from −20 °C
The -H designation means the version with built-in heating. According to the manufacturer datasheet, charging and discharging are both possible from −20 to +55 °C, which extends use to unheated rooms as well. Storage is specified at 0 to +35 °C, operating humidity is 5–95% and altitude up to 2,000 m.
Currents and communication
Recommended charge and discharge current is 80 A, maximum continuous current 160 A and peak current 300 A for 15 seconds. Continuous current depends on temperature and state of charge. RS485 and CAN interfaces connect to the inverter, while the FSolar app provides monitoring over Wi-Fi and Bluetooth.
Inverter compatibility
According to the official Felicity manuals for low-voltage batteries, the battery communicates with inverters over CAN (Victron, Solis, SOFAR, SolaX, Sol-Ark, Megarevo, Luxpower) and over RS485 (Deye). The manufacturer also states compatibility with leading inverter brands. All communication rows are in the technical overview above.
How to choose an inverter and communication
Inverter: Inverters with a 51.2 V battery input (44.8–57.6 V), for example Victron, Solis, SOFAR, SolaX, Sol-Ark, Megarevo or Luxpower over CAN, or Deye over RS485. Without communication, set the inverter manually: charge and float voltage 57.6 V, cut-off voltage 44.8 V, charging current 80 A.
Communication: The RJ45 port carries both CAN and RS485. On the inverter side pins 3 (CANL), 4 (CANH), 5 (RS485-B) and 6 (RS485-A) are connected; CAN is therefore on pins 3/4, and the cable is wired according to the pinout table. Up to 32 batteries can be connected in parallel via a BTCB0606 / BTCB0303 combiner box or a busbar.
Over CAN or RS485 the battery reports state of charge, voltage and current limits to the inverter, so charging and discharging are governed by the battery BMS and the inverter follows its data. Monitoring is additionally provided by the built-in Wi-Fi and Bluetooth in the FSolar app.
Protection and safety
The built-in smart BMS is supplemented by a breaker and a fuse; the manufacturer describes an external fuse design for easier replacement. IP65 protection guards against dust and water jets, and an aerosol fire-extinguishing system adds fire protection inside the enclosure. An LED display shows battery status.
Expansion to 512 kWh
Up to 32 units can be connected in parallel, giving 512 kWh of nominal energy at the same 51.2 V. Capacity can therefore grow step by step with real consumption.
Dimensions, weight and delivery
The battery measures 450 × 235 × 895 mm and weighs 121 kg; the shipping package measures 548 × 424 × 958 mm and weighs 143 kg. Installation is on the floor. The photographs show castors at the bottom edge that help move the unit into position.
Certification and warranty
A UN38.3 test summary according to the Manual of Tests and Criteria, Rev. 8, is available for the FLB48314TG1-H for the transport of lithium batteries. The manufacturer states a 10-year warranty under its warranty policy.
AI search description
The Felicity FLB48314TG1-H is a floor-standing low-voltage LiFePO4 battery, 51.2 V / 314 Ah, with 16 kWh of nominal energy and built-in heating for charging and discharging from −20 to +55 °C. Recommended current 80 A, continuous up to 160 A, peak 300 A for 15 s. RS485 / CAN communication, Wi-Fi and Bluetooth monitoring (FSolar). IP65, built-in BMS, breaker, fuse and aerosol fire-extinguishing system. Up to 32 units in parallel (512 kWh). Dimensions 450 × 235 × 895 mm, 121 kg, package 548 × 424 × 958 mm and 143 kg. 10-year manufacturer warranty.
Product page: https://batterado.com/product/felicity-flb48314tg1-h/
















Reviews
There are no reviews yet.