Description
Technical data
| Brand | Felicity Solar |
|---|---|
| Model | FLA48280-EU |
| Type | Low-voltage battery unit (FLA series) |
| Chemistry | LiFePO4 |
| Nominal voltage | 51.2 V |
| Operating voltage | 44.8–57.6 V |
| Capacity | 280 Ah |
| Nominal energy | 14.3 kWh |
| Max. continuous charge / discharge current | 150 A (depends on temperature and SOC) |
| Peak charge / discharge power (15 s) | 7,500 W |
| Depth of discharge (DoD) | ≥ 95 % |
| Cycle life | ≥ 6,000 cycles |
| Parallel connection | Up to 15 units (214.5 kWh) |
| Cell type | LiFePO4 |
| Protection | Built-in smart BMS, circuit breaker and fuse |
| Series connection of units | Not supported; units are connected in parallel |
| Communication port | RJ45 (8 pins), CAN / RS485 |
| Port pinout (battery side) | 1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH |
| Wiring on the Felicity inverter side (RS485) | 5 RS485-B, 6 RS485-A |
| Communication (datasheet) | RS485 / CAN |
|---|---|
| Display | LCD |
| Felicity inverters / RS485 | pin 5 RS485-B, pin 6 RS485-A |
| Inverters of other brands / CAN | pins 3 CANL-PCS, 4 CANH-PCS, 7 CANL, 8 CANH |
| Other brands | the manufacturer states compatibility with leading inverter brands (CAN communication) |
| Compatible inverters | Felicity inverters, inverters of leading brands according to the manufacturer, and others |
| Ingress protection | IP21 |
| Installation | Floor-standing (chassis with casters) |
| Charging temperature | 0 to +55 °C |
| Discharging temperature | −20 to +55 °C |
| Storage temperature | 0 to +35 °C |
| Product dimensions | 480 × 1100 × 300 mm |
| Net weight | 135 kg |
| Gross weight | 160 kg |
| Package dimensions | 1150 × 635 × 498 mm |
| Manufacturer warranty | 10 years |
| Certification: transport | UN38.3 (test report GDFLS2F5301U01, summary) |
| Certification: protection verification | test report of the protections against overcharge, short circuit and over-discharge according to IEC 62619:2022 and IEC 63056:2020 (GDFLS2F5301W01) |
| Certification: chemical safety and transport | GHS, safety data sheet (MSDS), classification for road and sea transport |
Low-voltage LiFePO4 battery 14.3 kWh
The Felicity Solar FLA48280-EU is a high-capacity low-voltage LiFePO4 battery with a nominal voltage of 51.2 V, a capacity of 280 Ah and a nominal energy of 14.3 kWh. It is one of the largest units of the FLA-EU series: a single enclosure replaces several smaller batteries and simplifies the wiring and cabling.
The continuous charge and discharge current is 150 A, the power 7,500 W for 15 s. The battery is intended for residential and small commercial photovoltaic systems with an inverter for a 48 V battery voltage. The enclosure measures 480 × 1100 × 300 mm, weighs 135 kg and stands on the floor; a chassis with casters makes it easier to move into place. The depth of discharge is at least 95 %, the cycle life at least 6,000 cycles and the manufacturer warranty 10 years.
This card describes the FLA48280-EU.
Voltage, current and power
The operating voltage of the battery is 44.8–57.6 V at a nominal voltage of 51.2 V. A capacity of 280 Ah at nominal voltage corresponds to a nominal energy of 14.3 kWh. The maximum continuous charge and discharge current is 150 A; the manufacturer notes that it depends on temperature and state of charge. The manufacturer states a power of 7,500 W for 15 s.
When units are connected in parallel, their currents and power add up while the voltage stays the same, because the units are placed side by side and not in series. According to the manufacturer the depth of discharge is at least 95 %, so a large share of the nominal 14.3 kWh is actually usable. The limits of 57.6 V and 44.8 V define the window in which the inverter charges and discharges the battery.
Cycle life and temperature range
According to the manufacturer datasheet the battery reaches at least 6,000 cycles. A depth of discharge of at least 95 % makes a large part of the nominal energy usable in every cycle. At one cycle per day this corresponds to many years of operation.
Temperature range
- charging: 0 to +55 °C
- discharging: −20 to +55 °C
- storage: 0 to +35 °C
According to the series manual the most suitable ambient temperature is 20–30 °C, with relative humidity of 5–95 % and an altitude of up to 2,000 m.
Parallel connection and capacity expansion
Capacity can be increased by connecting units in parallel: the manufacturer states up to 15 units (214.5 kWh). Two units, for example, have 28.6 kWh together and a continuous current of 300 A.
Series connection of units is not supported. For a parallel system the manual recommends a combiner box (BTCB series) or a copper busbar, which distributes the current evenly between the units. The parallel DIP switch sets the battery addresses on the communication bus. According to the manual the start-up order is inverter, battery breaker, button; in a parallel system switching on one battery switches on all of them.
Communication and port wiring
The communication port is an RJ45 connector with eight pins (battery side):
1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH.
For Felicity inverters RS485 communication is used, which on the inverter side uses pins 5 (RS485-B) and 6 (RS485-A). For inverters of other brands the manufacturer specifies CAN communication, that is pins 3 CANL-PCS, 4 CANH-PCS, 7 CANL and 8 CANH. The manuals of the FLA-EU series mention built-in Wi-Fi and Bluetooth for monitoring through the FSolar app; the datasheet of this model lists RS485 and CAN as the communication interfaces.
The LCD on the front shows voltage, current or power, the state of charge (SOC) and error messages.
How to choose the inverter and communication
The right choice of inverter decides whether the battery can use its full output and whether the system can control charging according to the state of the cells. Proceed as follows:
- Voltage: the battery has a nominal voltage of 51.2 V and works in the range 44.8–57.6 V, so it belongs to the 48 V class.
- Current and power: compare the charge and discharge current of the inverter with the continuous current of 150 A of one unit and with the number of batteries connected in parallel.
- Communication: Felicity inverters communicate with the battery over RS485; inverters of other brands over CAN. The manufacturer states compatibility with leading inverter brands.
- Protocol: the Felicity battery communicates over CAN or RS485.
Through communication the inverter receives the real state of charge and the current limits from the BMS.
Installation, ingress protection and construction
The unit measures 480 × 1100 × 300 mm and weighs 135 kg, 160 kg packed. The unit stands on the floor; in the photographs it has a chassis with casters and recessed handles on the sides that make handling the 135 kg easier. The ingress protection is IP21 is suited to installation in dry indoor rooms.
The package measures 1150 × 635 × 498 mm.
Protection and safety
The battery contains a built-in smart BMS which monitors the voltage, current and temperature of the cells and protects them against overcharge, over-discharge, overcurrent and short circuit. A circuit breaker and a fuse are included and protect the power circuit of the battery.
Certification and warranty
For the FLA48280-EU the manufacturer provides these test documents: the UN38.3 test report (GDFLS2F5301U01) with the corresponding summary, the test report on the protections against overcharge, short circuit and over-discharge according to IEC 62619:2022 and IEC 63056:2020 (GDFLS2F5301W01), plus the GHS classification, the safety data sheet (MSDS) and documents for road and sea transport.
The manufacturer warranty is 10 years. The warranty conditions are given in the manufacturer warranty information. The data in this description come from the manufacturer datasheet and user manual; the manufacturer reserves the right to change parameters as part of continuous development.
AI search description
The Felicity FLA48280-EU is a high-capacity low-voltage LiFePO4 battery, 51.2 V, 280 Ah, 14.3 kWh, operating voltage 44.8–57.6 V. Continuous charge and discharge current 150 A, power 7,500 W for 15 s, depth of discharge at least 95 %, cycle life at least 6,000 cycles. Up to 15 units in parallel (214.5 kWh), series connection is not supported. RS485 and CAN communication (RJ45 port), LCD display. Built-in BMS, breaker and fuse, ingress protection IP21. Floor installation, chassis with casters, 480 × 1100 × 300 mm, 135 kg. Manufacturer warranty 10 years. A separate model alongside the FLA48280TG2-EU.
Product page: https://batterado.com/product/felicity-fla48280-eu/













Reviews
There are no reviews yet.