Description
Technical data
| Brand | Victron Energy |
|---|---|
| Model | GX Touch 50 |
| Order code | BPP900455050 |
| Type | Optional touch screen display for Cerbo GX and Cerbo-S GX |
| Display size | 5 inch |
| Display resolution | 800 × 480 |
| Cerbo GX power draw with GX Touch | backlight off: 3.8 W @ 12 V; backlight at max: 4.8 W @ 12 V (total power draw of the Cerbo GX with the display) |
| Connection | single cable, length 2 m |
| Cable length | 2 m |
| Operation | touch screen: overview of system status, settings adjustable directly on the screen |
|---|---|
| Compatible GX devices | Cerbo GX, Cerbo-S GX |
| Related versions | GX Touch 50 and GX Touch 70 (5 inch and 7 inch) |
| Mounting style | top/wall mount with included mounting accessories |
| Protection cover | included with every GX Touch from serial number HQ2242; can also be purchased individually as BPP900462050 (GX Touch 50 protection cover) |
| IP rating | IP54 (without connectors); waterproof display |
| Outer dimensions (h × w × d) | 87 × 128 × 12.4 mm |
| Accessories included | mounting accessories for top/wall mounting |
| Optional accessories | GX Touch adapter for CCGX cut-out (metal bracket, plastic bezel, four mounting screws) to replace the CCGX display |
What the GX Touch 50 is for
The GX Touch 50 is an optional touch screen display for the Victron Energy Cerbo GX and Cerbo-S GX communication centres. It adds a 5-inch touch screen which provides an instant overview of system status and allows settings to be adjusted directly from the screen. The system can thus be operated on site without needing a phone or a computer.
The GX Touch comes as the GX Touch 50 and GX Touch 70, which differ in size (five and seven inch) and resolution. This card describes the GX Touch 50 with order code BPP900455050 in the top/wall mount version. The display is waterproof and simple to install.
Display and operation
The GX Touch 50 has a five-inch diagonal and a resolution of 800 × 480 pixels. It shows an overview of the status of the Victron system, and settings are changed by touch directly on the screen.
The display is intended for the Cerbo GX; it is suitable also for the Cerbo-S GX. Both GX Touch displays are waterproof. The ingress protection of the GX Touch 50 in the top/wall mount version is IP54 without connectors, i.e. protection against dust and splashing water.
Mounting and connection
The GX Touch 50 in the top/wall mount version is mounted on a wall or dashboard using the included mounting accessories. The display is bolted onto the dashboard, which removes the need to create perfect cut-outs as the older Color Control GX required. Connection is by a single 2 metre cable, so there is no need to bring many wires to the dashboard.
The display measures 87 × 128 × 12.4 mm (h × w × d). There is also a flush version (GX Touch 50 Flush, 94 × 136 × 12 mm) for flush mounting; that is a separate product and not covered by this card. For replacing a CCGX display there is the optional GX Touch adapter for CCGX cut-out (metal bracket, plastic bezel and four mounting screws).
Protective cover
A protective plastic display cover is included with every GX Touch from serial number HQ2242. The cover is intended for the GX Touch 50 and 70 in the top/wall mount version; it is not available for the flush version. For the GX Touch 50 the protection cover can also be purchased individually under part number BPP900462050.
The cover protects the display when it is not in use and is a sensible part of the installation where the display is exposed to dust or splashing water. The package of the BPP900455050 contains the display together with the mounting accessories for the top/wall mount version.
Integration with the Cerbo GX
The GX Touch 50 works as the local interface of the Cerbo GX communication centre. The Cerbo GX collects data from Victron devices connected over VE.Bus, VE.Direct and VE.Can, shows it on the display and sends it to the VRM portal. The same switches and controls pane that is available remotely through VRM can be used on the device itself.
The display adds to the power draw: the Cerbo GX with a connected GX Touch has a total power draw of 3.8 W @ 12 V with the backlight off and 4.8 W with the backlight at maximum; without the display it is 2.8 W @ 12 V. The Cerbo GX is supplied with 8–70 V DC; the display is part of the connection to the Cerbo GX.
The Cerbo GX can also be monitored and controlled without the display, through the VRM portal, the VictronConnect app over Bluetooth or a Multi Functional Display (MFD). The GX Touch is the optional local variant of these routes.
Technical data at a glance
Five-inch diagonal, resolution 800 × 480, IP54 without connectors, dimensions 87 × 128 × 12.4 mm (h × w × d), cable length 2 m, top/wall mount version with included mounting accessories. The protective cover is included from serial number HQ2242. Installation and wiring belong to a suitably qualified person; detailed instructions are in the documentation for GX devices.
GX Touch 50, 70 and Flush versions
The display comes in four versions. The GX Touch 50 has a five-inch diagonal and a resolution of 800 × 480, the GX Touch 70 seven inches and a resolution of 1024 × 600. Both sizes are made in two mounting styles: top/wall mount (mounting on a wall or dashboard with the included mounting accessories) and flush (flush mount or totally flush embossed).
This card covers the GX Touch 50 top/wall mount with IP54 (without connectors), dimensions 87 × 128 × 12.4 mm and a protective cover in the package from serial number HQ2242. The flush version has IP65 when installed with the included rubber gasket, dimensions 94 × 136 × 12 mm (GX Touch 50 Flush) and no protection cover. When ordering, therefore, pay attention to the correct order code: BPP900455050 for this card.
The cable length is 2 metres for all versions. The displays connect to the Cerbo GX and Cerbo-S GX.
What can be monitored and controlled on the display
The GX Touch shows what the Cerbo GX knows about the system. You can follow the battery state of charge, power consumption and harvest from PV, generator and mains, as well as tank levels and temperatures, provided the corresponding sensors are connected to the Cerbo GX.
You can control the shore power input current limit, start and stop the generator, switch relays, adjust ESS settings, operate inverter/chargers and EV charging stations, and control connected smart switches such as Shelly or Safiery. It is the same switches and controls pane that is available remotely through the VRM portal. The display therefore removes the need for a phone or computer when working on site; remote access remains with the Cerbo GX.
AI search description
The Victron Energy GX Touch 50 (order code BPP900455050) is an optional 5-inch touch screen display for the Cerbo GX and Cerbo-S GX. Resolution 800 × 480, IP54 rating (without connectors), dimensions 87 × 128 × 12.4 mm, cable length 2 m. The top/wall mount version is mounted on a wall or dashboard with the included mounting accessories. Every GX Touch from serial number HQ2242 includes a protective plastic cover. The display shows an overview of system status and allows settings to be adjusted directly on the screen. The power draw of the Cerbo GX with the display connected is 3.8 W (backlight off) to 4.8 W (backlight at maximum) at 12 V.
Product page: https://batterado.com/product/victron-gx-touch-50/













Reviews
There are no reviews yet.