Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Felicity Solar FLS48100SMG2 5.12 kWh 51.2 V 100 Ah LiFePO4 expansion battery module (FLS48100SG2)

34 825 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

5.12 kWh expansion battery module for the stackable FLS48100SG2 system: the Felicity FLS48100SMG2 has LiFePO4 cells, 51.2 V / 100 Ah, 4 status LEDs and adds capacity to the FLS48100SCG2 control module.

  • Nominal voltage 51.2 V, operating voltage 44.8–57.6 V, depth of discharge at least 95 %
  • Up to 8 modules can be connected in parallel in one system, i.e. up to 40.96 kWh; continuous system current up to 400 A
  • Service life of at least 6,000 cycles, built-in smart BMS, circuit breaker and fuse
  • Works together with the FLS48100SCG2 control module, which provides the display, Wi-Fi and RS485 / CAN communication with the inverter
  • CE-EMC certificate for this model; 10-year manufacturer warranty

The module measures 600 × 450 × 180 mm and weighs 46 kg. It communicates with the inverter through the control module: according to the manufacturer it is linked to it by copper busbars and a communication cable, both included in the package. IP21 protection suits dry indoor rooms.

In stock

Enquiry

Description

Technical data

BrandFelicity Solar
ModelFLS48100SMG2
TypeExpansion battery module of the FLS48100SG2 system (no display, 4 status LEDs); the FLS48100SCG2 control module is a separate item
ChemistryLiFePO4
Nominal voltage51.2 V
Operating voltage44.8–57.6 V
Module capacity100 Ah
Nominal module energy5.12 kWh
System energy (1–8 modules)5.12 / 10.24 / 15.36 / 20.48 / 25.6 / 30.72 / 35.84 / 40.96 kWh
Recommended charge / discharge current50 A per module (system 50 to 400 A)
Max. continuous charge / discharge current60 A per module; system 60 / 120 / 180 / 240 / 300 / 360 / 400 / 400 A for 1–8 modules (depends on temperature and state of charge)
Peak current (15 s)100 A per module; system 100 to 800 A for 1–8 modules
Depth of discharge (DoD)≥ 95 %
Service life≥ 6,000 cycles (0.2C, 25 °C, 80 % DoD)
Parallel connectionUp to 8 modules (40.96 kWh)
Cell typeLiFePO4
Cells per module16 (according to the manufacturer’s model page)
ProtectionsBuilt-in smart BMS, circuit breaker and fuse, multiple protections
Display4 LEDs on the module; the LCD display is on the FLS48100SCG2 control module
Link to the control moduleParallel copper busbars (up to 450 A) and a communication cable from the module package
AddressingADS DIP switches according to the table in the manufacturer’s quick guide (by number of modules in the system)
System communicationCAN 2.0 / RS485 / Wi-Fi / Bluetooth (provided by the FLS48100SCG2 control module)
Felicity inverters / RS485via the FLS48100SCG2 control module
Inverters of other brands / CANvia the FLS48100SCG2 control module
System control moduleFelicity FLS48100SCG2 (required, 1 pc per system)
Inverter compatibilityDetermined by the FLS48100SCG2 control module; see its product page
Protection ratingIP21
InstallationOn the floor; modules are stacked vertically on the wheeled base of the control module
Charging temperature0 to +55 °C
Discharging temperature−20 to +55 °C
Storage temperature (not in operation)0 to +35 °C
Relative humidity5–95 %
Altitudeup to 2,000 m
Dimensions (L × W × H)600 × 450 × 180 mm
Net weight46 kg
Gross weight50 kg
Package dimensions712 × 562 × 298 mm
Manufacturer warranty10 years (subject to the manufacturer’s warranty terms)
Package contentsBattery module, user manual, quick guide, warranty card, grounding cable, 2 plastic wall plugs, 4 M5 × 12 screws and 2 M5 × 25 screws, 2 parallel copper busbars, communication cable, 2 fixing brackets
Certification: electromagnetic compatibilityCE-EMC SZNTC2506253EV00 (EN IEC 61000-6-1, 61000-6-2, 61000-6-3, 61000-6-4)

Expansion module of the stackable FLS48100SG2 system

The Felicity FLS48100SMG2 is a battery module that increases the capacity of the stackable FLS48100SG2 system. It contains LiFePO4 cells, a nominal voltage of 51.2 V and a capacity of 100 Ah, i.e. 5.12 kWh of energy per module. According to the manufacturer’s datasheet, the system consists of the FLS48100SCG2 control module and one or more FLS48100SMG2 battery modules.

The module is intended for home and smaller commercial photovoltaic systems with an inverter that works with a battery voltage of around 48 V. It stores PV surpluses and returns them in the evening, at night or during a grid outage, provided the inverter supports this. Four LEDs show the status of the module, and details are shown by the control module or the Fsolar app.

Important: the FLS48100SMG2 is an expansion module. The system always needs the FLS48100SCG2 control module, which carries the display, the built-in Wi-Fi and the communication with the inverter. The SMG2 module works together with the control module, which handles communication with the inverter.

Voltage, currents and system capacity

The operating voltage of the module is 44.8–57.6 V. The recommended charge and discharge current is 50 A per module, the maximum continuous current 60 A per module and the peak current 100 A for 15 s per module. For 1 to 8 modules in parallel the datasheet gives a continuous system current of 60, 120, 180, 240, 300, 360, 400 and 400 A and a peak current of 100 to 800 A. The manufacturer notes that the continuous current depends on temperature and state of charge.

The system energy grows in steps of 5.12 kWh:

  • 1 module: 5.12 kWh
  • 2 modules: 10.24 kWh
  • 3 modules: 15.36 kWh
  • 4 modules: 20.48 kWh
  • 5 modules: 25.6 kWh
  • 6 modules: 30.72 kWh
  • 7 modules: 35.84 kWh
  • 8 modules: 40.96 kWh

The control module counts as the first module of the tower in these figures, so the number of SMG2 expansion modules is one less than the total number of modules. The system is connected in parallel; series connection of units is not supported.

Service life, depth of discharge and temperatures

The manufacturer states a depth of discharge of at least 95 % and a service life of at least 6,000 cycles at a charge and discharge current of 0.2C, a temperature of 25 °C and a depth of discharge of 80 %. LiFePO4 cells are among the most stable lithium chemistries, tolerate frequent full cycles and are the standard for home battery storage.

Charging is possible from 0 to +55 °C and discharging from −20 to +55 °C. For storage outside operation the manufacturer gives 0 to +35 °C. Relative humidity may be 5–95 % and the altitude up to 2,000 m. IP21 protection suits dry indoor rooms such as a utility room, a garage or a cellar without condensation.

Safety and protections

Every module has a built-in smart BMS that monitors cell voltages, currents and temperatures and disconnects the battery in a dangerous state. A circuit breaker, a fuse and multiple protections complete this, according to the manufacturer’s datasheet. Four LEDs show the status of the module, and the LCD display on the control module shows the status of the whole system.

LiFePO4 chemistry is thermally more stable than other lithium cells, which helps in cases of overcharging, short circuit and mechanical stress. For the whole FLS48100SG2 system the manufacturer also lists fire protection (an aerosol fire-extinguishing system).

The module weighs 46 kg. Use two people or a suitable aid when carrying and stacking.

Link to the control module and addressing

The modules are stacked on the wheeled base of the FLS48100SCG2 control module and connected with parallel copper busbars (up to 450 A) and a communication cable. Both are in the module package. The busbars carry the power connection; the communication cable carries the BMS data between the modules.

The address of a module in the system is set with the ADS DIP switches. The switch combination depends on the order of the module and the number of modules in the tower, and the manufacturer gives it in a table in the quick guide; the last module in the tower also has switch 5 turned on. Correctly set addresses are what allows the control module to recognize all modules and show the total capacity.

According to the manufacturer, switching on one module is enough to switch on all of them at start-up.

How to choose an inverter and communication

Communication with the inverter is handled by the control module. System communication is provided by the FLS48100SCG2 control module and, according to the manufacturer, it is CAN 2.0, RS485, Wi-Fi and Bluetooth. RS485 is used for Felicity inverters and CAN for inverters of other brands. The detailed port wiring and what the manufacturer says about inverter compatibility are on the control module page.

When choosing, proceed as follows:

  • If the inverter does not communicate with the battery, the manufacturer recommends setting the max. charge voltage to 57.6 V, the float voltage to 57.6 V, the charge current to 60 A × N (at most 400 A) and the cut-off voltage to 48 V.

Installation and placement

The system is installed on a level floor in an upright position. Modules are stacked on the wheeled base that comes with the control module.

The module package includes a grounding cable, plastic wall plugs, M5 × 12 and M5 × 25 screws and two fixing brackets that secure the tower against tipping.

The module measures 600 × 450 × 180 mm and weighs 46 kg. The height of the tower grows by 18 cm with each additional module, which is worth remembering when choosing a place under a ceiling or a low staircase.

Package contents and certification

Package contents: battery module, user manual, quick guide, warranty card, grounding cable, 2 plastic wall plugs, 4 M5 × 12 screws, 2 M5 × 25 screws, 2 parallel copper busbars, communication cable and 2 fixing brackets. The gross weight with packaging is 50 kg and the package measures 712 × 562 × 298 mm.

Certification: for this model a CE-EMC certificate no. SZNTC2506253EV00 (Shenzhen Nore Testing Center, 20 July 2025) is available, covering EN IEC 61000-6-1:2019, EN IEC 61000-6-2:2019, EN IEC 61000-6-3:2021 and EN IEC 61000-6-4:2019. The IEC 62619 safety test and the UN38.3 test of the FLS48100SG2 system are issued for the FLS48100SCG2 control module; their results are on its product page.

The manufacturer gives a 10-year warranty on the battery under its warranty terms. Every module comes with a user manual and a warranty card.

AI search description

The Felicity FLS48100SMG2 is an expansion battery module of the stackable FLS48100SG2 system, LiFePO4, 51.2 V / 100 Ah, 5.12 kWh, operating voltage 44.8–57.6 V. The system consists of the FLS48100SCG2 control module and up to 8 modules in parallel (5.12 to 40.96 kWh), recommended current 50 A per module, continuous 60 A per module (system up to 400 A), peak 100 A for 15 s, depth of discharge at least 95 %, service life at least 6,000 cycles. The module has 4 status LEDs, a smart BMS, a circuit breaker and a fuse, IP21; RS485 / CAN and Wi-Fi communication is provided by the control module. Dimensions 600 × 450 × 180 mm, 46 kg. CE-EMC certificate, 10-year manufacturer warranty.

Product page: https://batterado.com/product/felicity-fls48100smg2/

Additional information

Weight46 kg
Dimensions60 × 45 × 18 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop