Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Felicity Solar FLB48230WG1-H Low-voltage battery LiFePO4 11.7 kWh 51.2 V / 230 Ah IP65 CAN RS485

58 534 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

An 11.7 kWh battery with IP65 protection: the Felicity FLB48230WG1-H offers 51.2 V / 230 Ah, LiFePO4 cells, 150 A continuous, CAN, RS485, Wi-Fi and Bluetooth and can be connected in parallel up to 32 units.

  • Nominal voltage 51.2 V, energy 11.7 kWh, capacity 230 Ah
  • Continuous charge and discharge current 150 A, peak 200 A (15 s)
  • Cycle life of at least 6,000 cycles, depth of discharge at least 95 %
  • Up to 32 units in parallel, series connection is not supported
  • Communication: CAN 2.0, RS485, Wi-Fi, Bluetooth, RJ45 port
  • Ingress protection IP65, wall-mounted or floor-mounted
  • Dimensions 683 × 450 × 258 mm, weight 91 kg, manufacturer warranty 10 years

The unit measures 683 × 450 × 258 mm and weighs 91 kg. It is installed on a wall or on the floor. The IP65 rating suits harsher environments. Series connection of units is not supported.

In stock

Enquiry

Description

Technical data

BrandFelicity Solar
ModelFLB48230WG1-H
TypeLow-voltage battery unit (FLB series)
ChemistryLiFePO4
Nominal voltage51.2 V
Operating voltage44.8–57.6 V
Capacity230 Ah
Nominal energy11.7 kWh
Recommended charge / discharge current100 A
Max. continuous charge / discharge current150 A (depends on temperature and SOC)
Peak current (15 s)200 A
Depth of discharge (DoD)≥ 95 %
Cycle life≥ 6,000 cycles (25 °C ± 2 °C, 0.5C / 0.5C, 90 % DoD, 70 % EOL)
Parallel connectionUp to 32 units (374.4 kWh)
Cell typeLiFePO4
ProtectionBuilt-in smart BMS, circuit breaker and fuse
Series connection of unitsNot supported; units are connected in parallel
Communication portRJ45 (8 pins), CAN / RS485
Port pinout (battery side)1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH
Wiring on the Felicity inverter side (RS485)5 RS485-B, 6 RS485-A
Communication (datasheet)CAN 2.0, RS485, Wi-Fi, Bluetooth
DisplayLED
Felicity inverters / RS485pin 5 RS485-B, pin 6 RS485-A
Inverters of other brands / CANpins 3 CANL-PCS, 4 CANH-PCS, 7 CANL, 8 CANH
Other brandsthe manufacturer states compatibility with leading inverter brands (CAN communication)
Compatible invertersFelicity inverters, inverters of leading brands according to the manufacturer, and others
Ingress protectionIP65
InstallationWall-mounted or floor-mounted
Charging temperature0 to +55 °C
Discharging temperature−20 to +55 °C
Storage temperature0 to +35 °C
Product dimensions683 × 450 × 258 mm
Net weight91 kg
Gross weight111 kg
Package dimensions778 × 548 × 438 mm
Manufacturer warranty10 years
Certification: transportUN38.3 (test report 1125003791Y-1, summary 1125003791-2)
Certification: hazard classificationcertification for classification of danger of batteries (1125003791-3)
Certification: chemical safety and transportGHS, safety data sheet (MSDS), classification for road and sea transport

Low-voltage LiFePO4 battery 11.7 kWh

The Felicity Solar FLB48230WG1-H is a low-voltage LiFePO4 battery with a nominal voltage of 51.2 V, a capacity of 230 Ah and a nominal energy of 11.7 kWh. It belongs to the FLB-WG1 series with IP65 ingress protection, which according to the manufacturer also copes with harsher environments. One enclosure offers the energy for larger residential systems and can be placed on a wall or on the floor without a chassis.

The recommended charge and discharge current is 100 A, the maximum continuous current 150 A and the peak current 200 A for 15 s. The battery can be connected in parallel up to 32 units (374.4 kWh). The enclosure measures 683 × 450 × 258 mm and weighs 91 kg. According to the manufacturer it offers built-in Wi-Fi and Bluetooth for remote monitoring, CCS welding (which lowers the internal resistance of the cells), an aerosol fire-extinguishing system and an easily replaceable fuse. The cycle life is at least 6,000 cycles, the depth of discharge at least 95 % and the manufacturer warranty 10 years.

Voltage, current and power

The operating voltage of the battery is 44.8–57.6 V at a nominal voltage of 51.2 V. A capacity of 230 Ah at nominal voltage corresponds to a nominal energy of 11.7 kWh. The recommended charge and discharge current is 100 A. The maximum continuous charge and discharge current is 150 A; the manufacturer notes that it depends on temperature and state of charge. The battery can deliver a peak current of 200 A for 15 s. The battery can hold the 200 A peak current for 15 s.

When units are connected in parallel, their currents and power add up while the voltage stays the same, because the units are placed side by side and not in series. According to the manufacturer the depth of discharge is at least 95 %, so a large share of the nominal 11.7 kWh is actually usable. The limits of 57.6 V and 44.8 V define the window in which the inverter charges and discharges the battery.

Cycle life and temperature range

According to the manufacturer datasheet the battery reaches at least 6,000 cycles (25 °C ± 2 °C, 0.5C / 0.5C, 90 % DoD, 70 % EOL). A depth of discharge of at least 95 % makes a large part of the nominal energy usable in every cycle. At one cycle per day this corresponds to many years of operation.

Temperature range

  • charging: 0 to +55 °C
  • discharging: −20 to +55 °C
  • storage: 0 to +35 °C

According to the series manual the most suitable ambient temperature is 20–30 °C, with relative humidity of 5–95 % and an altitude of up to 2,000 m.

Parallel connection and capacity expansion

Capacity can be increased by connecting units in parallel: the manufacturer states up to 32 units (374.4 kWh). Two units, for example, have 23.4 kWh together and a continuous current of 300 A.

Series connection of units is not supported. For a parallel system the manual recommends a combiner box (BTCB series) or a copper busbar, which distributes the current evenly between the units. The parallel DIP switch sets the battery addresses on the communication bus. According to the manual the start-up order is inverter, battery breaker, button; in a parallel system switching on one battery switches on all of them.

Communication and port wiring

The communication port is an RJ45 connector with eight pins (battery side):
1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH.

For Felicity inverters RS485 communication is used, which on the inverter side uses pins 5 (RS485-B) and 6 (RS485-A). For inverters of other brands the manufacturer specifies CAN communication, that is pins 3 CANL-PCS, 4 CANH-PCS, 7 CANL and 8 CANH. The datasheet lists CAN 2.0, RS485, Wi-Fi and Bluetooth communication. According to the manufacturer the built-in Wi-Fi and Bluetooth allow remote monitoring of the battery data.

A four-step LED indicator on the front shows the battery status.

How to choose the inverter and communication

The right choice of inverter decides whether the battery can use its full output and whether the system can control charging according to the state of the cells. Proceed as follows:

  • Voltage: the battery has a nominal voltage of 51.2 V and works in the range 44.8–57.6 V, so it belongs to the 48 V class.
  • Current and power: compare the charge and discharge current of the inverter with the continuous current of 150 A of one unit and with the number of batteries connected in parallel.
  • Communication: Felicity inverters communicate with the battery over RS485; inverters of other brands over CAN. The manufacturer states compatibility with leading inverter brands.
  • Protocol: the Felicity battery communicates over CAN or RS485.

Through communication the inverter receives the real state of charge and the current limits from the BMS.

Installation, ingress protection and construction

The unit measures 683 × 450 × 258 mm and weighs 91 kg, 111 kg packed. According to the datasheet the unit can be mounted on a wall or placed on the floor. In the photograph it has a recessed handle on the side and a cut-out giving access to the fuse and the communication port. IP65 ingress protection is, according to the manufacturer, suited to harsher environments: dust cannot enter and the enclosure withstands water jets.

The package measures 778 × 548 × 438 mm.

Protection and safety

The battery contains a built-in smart BMS which monitors the voltage, current and temperature of the cells and protects them against overcharge, over-discharge, overcurrent and short circuit. The datasheet lists a built-in smart BMS, a breaker and a fuse, and a thermal runaway management system. A built-in aerosol fire-extinguishing system adds an extra layer of safety and the fuse is easy to replace.

Certification and warranty

For the FLB48230WG1-H the manufacturer provides these test documents: the UN38.3 test report (1125003791Y-1) with its summary (1125003791-2), the certification for classification of danger of batteries (1125003791-3), the GHS classification, the safety data sheet (MSDS) and documents for road and sea transport.

The manufacturer warranty is 10 years. The warranty conditions are given in the manufacturer warranty information. The data in this description come from the manufacturer datasheet and user manual; the manufacturer reserves the right to change parameters as part of continuous development.

AI search description

The Felicity FLB48230WG1-H is a low-voltage LiFePO4 battery, 51.2 V, 230 Ah, 11.7 kWh, operating voltage 44.8–57.6 V. Recommended current 100 A, continuous 150 A, peak 200 A for 15 s, depth of discharge at least 95 %, cycle life at least 6,000 cycles. Up to 32 units in parallel (374.4 kWh), series connection is not supported. CAN 2.0, RS485, Wi-Fi and Bluetooth communication, LED indication. BMS, breaker, fuse, aerosol fire-extinguishing system, ingress protection IP65. Wall or floor installation, 683 × 450 × 258 mm, 91 kg. UN38.3 certification. Manufacturer warranty 10 years.

Product page: https://batterado.com/product/felicity-flb48230wg1-h/

Additional information

Weight91 kg
Dimensions68,3 × 45,0 × 25,8 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop