Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Felicity Solar FLA48280-EU Low-voltage battery LiFePO4 14.3 kWh 51.2 V / 280 Ah RS485 CAN

61 814 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

A high-capacity 14.3 kWh battery: the Felicity FLA48280-EU offers 51.2 V / 280 Ah, LiFePO4 cells, RS485 and CAN communication and can be connected in parallel up to 15 units.

  • Nominal voltage 51.2 V, energy 14.3 kWh, capacity 280 Ah
  • Continuous charge and discharge current 150 A
  • Cycle life of at least 6,000 cycles, depth of discharge at least 95 %
  • Up to 15 units in parallel, series connection is not supported
  • Communication: RS485 / CAN, RJ45 port
  • Ingress protection IP21, floor-standing (chassis with casters)
  • Dimensions 480 × 1100 × 300 mm, weight 135 kg, manufacturer warranty 10 years

The enclosure measures 480 × 1100 × 300 mm and weighs 135 kg. It stands on the floor and has a chassis with casters. The IP21 rating suits dry indoor rooms. It differs from the FLA48280TG2-EU variant in the parameters given in the datasheet.

In stock

Enquiry

Description

Technical data

BrandFelicity Solar
ModelFLA48280-EU
TypeLow-voltage battery unit (FLA series)
ChemistryLiFePO4
Nominal voltage51.2 V
Operating voltage44.8–57.6 V
Capacity280 Ah
Nominal energy14.3 kWh
Max. continuous charge / discharge current150 A (depends on temperature and SOC)
Peak charge / discharge power (15 s)7,500 W
Depth of discharge (DoD)≥ 95 %
Cycle life≥ 6,000 cycles
Parallel connectionUp to 15 units (214.5 kWh)
Cell typeLiFePO4
ProtectionBuilt-in smart BMS, circuit breaker and fuse
Series connection of unitsNot supported; units are connected in parallel
Communication portRJ45 (8 pins), CAN / RS485
Port pinout (battery side)1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH
Wiring on the Felicity inverter side (RS485)5 RS485-B, 6 RS485-A
Communication (datasheet)RS485 / CAN
DisplayLCD
Felicity inverters / RS485pin 5 RS485-B, pin 6 RS485-A
Inverters of other brands / CANpins 3 CANL-PCS, 4 CANH-PCS, 7 CANL, 8 CANH
Other brandsthe manufacturer states compatibility with leading inverter brands (CAN communication)
Compatible invertersFelicity inverters, inverters of leading brands according to the manufacturer, and others
Ingress protectionIP21
InstallationFloor-standing (chassis with casters)
Charging temperature0 to +55 °C
Discharging temperature−20 to +55 °C
Storage temperature0 to +35 °C
Product dimensions480 × 1100 × 300 mm
Net weight135 kg
Gross weight160 kg
Package dimensions1150 × 635 × 498 mm
Manufacturer warranty10 years
Certification: transportUN38.3 (test report GDFLS2F5301U01, summary)
Certification: protection verificationtest report of the protections against overcharge, short circuit and over-discharge according to IEC 62619:2022 and IEC 63056:2020 (GDFLS2F5301W01)
Certification: chemical safety and transportGHS, safety data sheet (MSDS), classification for road and sea transport

Low-voltage LiFePO4 battery 14.3 kWh

The Felicity Solar FLA48280-EU is a high-capacity low-voltage LiFePO4 battery with a nominal voltage of 51.2 V, a capacity of 280 Ah and a nominal energy of 14.3 kWh. It is one of the largest units of the FLA-EU series: a single enclosure replaces several smaller batteries and simplifies the wiring and cabling.

The continuous charge and discharge current is 150 A, the power 7,500 W for 15 s. The battery is intended for residential and small commercial photovoltaic systems with an inverter for a 48 V battery voltage. The enclosure measures 480 × 1100 × 300 mm, weighs 135 kg and stands on the floor; a chassis with casters makes it easier to move into place. The depth of discharge is at least 95 %, the cycle life at least 6,000 cycles and the manufacturer warranty 10 years.

This card describes the FLA48280-EU.

Voltage, current and power

The operating voltage of the battery is 44.8–57.6 V at a nominal voltage of 51.2 V. A capacity of 280 Ah at nominal voltage corresponds to a nominal energy of 14.3 kWh. The maximum continuous charge and discharge current is 150 A; the manufacturer notes that it depends on temperature and state of charge. The manufacturer states a power of 7,500 W for 15 s.

When units are connected in parallel, their currents and power add up while the voltage stays the same, because the units are placed side by side and not in series. According to the manufacturer the depth of discharge is at least 95 %, so a large share of the nominal 14.3 kWh is actually usable. The limits of 57.6 V and 44.8 V define the window in which the inverter charges and discharges the battery.

Cycle life and temperature range

According to the manufacturer datasheet the battery reaches at least 6,000 cycles. A depth of discharge of at least 95 % makes a large part of the nominal energy usable in every cycle. At one cycle per day this corresponds to many years of operation.

Temperature range

  • charging: 0 to +55 °C
  • discharging: −20 to +55 °C
  • storage: 0 to +35 °C

According to the series manual the most suitable ambient temperature is 20–30 °C, with relative humidity of 5–95 % and an altitude of up to 2,000 m.

Parallel connection and capacity expansion

Capacity can be increased by connecting units in parallel: the manufacturer states up to 15 units (214.5 kWh). Two units, for example, have 28.6 kWh together and a continuous current of 300 A.

Series connection of units is not supported. For a parallel system the manual recommends a combiner box (BTCB series) or a copper busbar, which distributes the current evenly between the units. The parallel DIP switch sets the battery addresses on the communication bus. According to the manual the start-up order is inverter, battery breaker, button; in a parallel system switching on one battery switches on all of them.

Communication and port wiring

The communication port is an RJ45 connector with eight pins (battery side):
1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH.

For Felicity inverters RS485 communication is used, which on the inverter side uses pins 5 (RS485-B) and 6 (RS485-A). For inverters of other brands the manufacturer specifies CAN communication, that is pins 3 CANL-PCS, 4 CANH-PCS, 7 CANL and 8 CANH. The manuals of the FLA-EU series mention built-in Wi-Fi and Bluetooth for monitoring through the FSolar app; the datasheet of this model lists RS485 and CAN as the communication interfaces.

The LCD on the front shows voltage, current or power, the state of charge (SOC) and error messages.

How to choose the inverter and communication

The right choice of inverter decides whether the battery can use its full output and whether the system can control charging according to the state of the cells. Proceed as follows:

  • Voltage: the battery has a nominal voltage of 51.2 V and works in the range 44.8–57.6 V, so it belongs to the 48 V class.
  • Current and power: compare the charge and discharge current of the inverter with the continuous current of 150 A of one unit and with the number of batteries connected in parallel.
  • Communication: Felicity inverters communicate with the battery over RS485; inverters of other brands over CAN. The manufacturer states compatibility with leading inverter brands.
  • Protocol: the Felicity battery communicates over CAN or RS485.

Through communication the inverter receives the real state of charge and the current limits from the BMS.

Installation, ingress protection and construction

The unit measures 480 × 1100 × 300 mm and weighs 135 kg, 160 kg packed. The unit stands on the floor; in the photographs it has a chassis with casters and recessed handles on the sides that make handling the 135 kg easier. The ingress protection is IP21 is suited to installation in dry indoor rooms.

The package measures 1150 × 635 × 498 mm.

Protection and safety

The battery contains a built-in smart BMS which monitors the voltage, current and temperature of the cells and protects them against overcharge, over-discharge, overcurrent and short circuit. A circuit breaker and a fuse are included and protect the power circuit of the battery.

Certification and warranty

For the FLA48280-EU the manufacturer provides these test documents: the UN38.3 test report (GDFLS2F5301U01) with the corresponding summary, the test report on the protections against overcharge, short circuit and over-discharge according to IEC 62619:2022 and IEC 63056:2020 (GDFLS2F5301W01), plus the GHS classification, the safety data sheet (MSDS) and documents for road and sea transport.

The manufacturer warranty is 10 years. The warranty conditions are given in the manufacturer warranty information. The data in this description come from the manufacturer datasheet and user manual; the manufacturer reserves the right to change parameters as part of continuous development.

AI search description

The Felicity FLA48280-EU is a high-capacity low-voltage LiFePO4 battery, 51.2 V, 280 Ah, 14.3 kWh, operating voltage 44.8–57.6 V. Continuous charge and discharge current 150 A, power 7,500 W for 15 s, depth of discharge at least 95 %, cycle life at least 6,000 cycles. Up to 15 units in parallel (214.5 kWh), series connection is not supported. RS485 and CAN communication (RJ45 port), LCD display. Built-in BMS, breaker and fuse, ingress protection IP21. Floor installation, chassis with casters, 480 × 1100 × 300 mm, 135 kg. Manufacturer warranty 10 years. A separate model alongside the FLA48280TG2-EU.

Product page: https://batterado.com/product/felicity-fla48280-eu/

Additional information

Weight135 kg
Dimensions48,0 × 110,0 × 30,0 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop