Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Deye SE-G5.1 Pro-B Low-Voltage LiFePO4 Battery Module 5.12 kWh 51.2 V / 100 Ah

25 286 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

5.12 kWh in one 3U module: the Deye SE-G5.1 Pro-B fits a 19-inch rack, a wall or the floor and expands in parallel.

  • LiFePO4, 51.2 V / 100 Ah, 5.12 kWh nominal, 4.6 kWh usable at the recommended 90 % DoD.
  • Recommended current 50 A, maximum 100 A and 150 A peak for 2 minutes.
  • CAN 2.0 and RS485 communication, built-in 125 A breaker and LED state-of-charge indication.
  • Up to 64 modules in parallel (327 kWh), up to 32 without an external solution.
  • Dimensions 440 × 133 × 540 mm, weight approx. 45 kg, 6,000 cycles.

The offer covers one module; manufacturer pictures of assemblies show several modules stacked. IP20 protection is intended for indoor rooms. Choose the number of modules according to household consumption and the battery input of your inverter.

In stock

Enquiry
Značky:

Description

Technical data

BrandDeye
ModelSE-G5.1 Pro-B
ChemistryLiFePO4
Nominal voltage51.2 V
Capacity100 Ah
Nominal energy5.12 kWh
Usable energy at recommended DoD 90%4.6 kWh
Operating voltage43.2–57.6 V
Recommended charge / discharge current50 A
Max. charge / discharge current100 A
Peak current (2 min, 25 °C)150 A
Built-in breaker125 A, 2P, 60 Vdc
Cycle life6,000 cycles (25 ±2 °C, 0.5C / 0.5C, 90% DoD, 70% EOL)
Charge temperature0 to +55 °C (optional heating: −20 to +55 °C)
Discharge temperature−20 to +55 °C
Storage temperature0 to +35 °C
Humidity / altitude5–95% / up to 2,000 m
Protection degreeIP20
CommunicationCAN 2.0 / RS485
Communication portPCS (RJ45): CAN 2.0 (500 kbit/s) and RS485 (9600 Bd)
Deye / CANDeye CAN protocol (Lithium Mode 00)
Parallel setupUp to 64 units (327 kWh), of which 32 units without further setup; mode 1 up to a 12 kW inverter (4 batteries), mode 2 above 12 kW
Compatible invertersLow-voltage Deye hybrid inverters per the official list DY-LV48-0132 (19 Oct 2026): single-phase SUN-(3.6–10)K-SG05LP1-EU-AM2-P, SUN-…-SG01LP1 / SG03LP1 / SG04LP1-EU, three-phase SUN-…-SG04LP3-EU and other low-voltage series on the list.
IndicationLED (5 × SOC, 3 × status)
InstallationWall, floor or 19″ rack (cabinet depth 600 mm)
Parallel connectionUp to 64 units (327 kWh); up to 32 without external setup
Dimensions (W × H × D)440 × 133 × 540 mm
Weightapprox. 45 kg
CertificationUN38.3, IEC 62619, CE, UK, VDE 2510-50, CEI 0-21, FCC, UL1973, UL9540A
Manufacturer warranty10 years per the datasheet; per the manufacturer 5 to 10 years depending on the final installation site (Deye warranty policy)

A 5.12 kWh module for rack or wall

The Deye SE-G5.1 Pro-B is a low-voltage LiFePO4 module, 51.2 V / 100 Ah, 3U high (133 mm). Nominal energy is 5.12 kWh; at the manufacturer’s recommended 90% depth of discharge the datasheet gives 4.6 kWh of usable energy. The 3U height and 440 mm width fit a 19-inch rack.

Currents and communication

Recommended charge and discharge current is 50 A, maximum 100 A and peak 150 A for 2 minutes at 25 °C. The built-in breaker is rated 125 A / 60 Vdc. Communication runs over CAN 2.0 or RS485, and LEDs show status (5 × SOC and 3 × state).

Inverter compatibility

On the official Deye list DY-LV48-0132 the SE-G5.1 Pro-B battery is listed with CAN communication and the inverter setting Lithium Mode 00. The same low-voltage Deye hybrid inverters are compatible as with the other SE batteries: single-phase SUN-(3.6–10)K-SG05LP1-EU-AM2-P, the SG01LP1 / SG03LP1 / SG04LP1-EU series and three-phase SG04LP3-EU.

How to choose an inverter and communication

Inverter: Choose a low-voltage Deye hybrid inverter from the list DY-LV48-0132 and set Lithium Mode 00 (Deye CAN) on the inverter.

Communication: The PCS port (RJ45) carries CAN 2.0 (500 kbit/s) and RS485 (9600 Bd). Up to 64 modules (327 kWh) can be connected in parallel, 32 of them without further setup. Mode 1 is used up to a 12 kW inverter (4 batteries), mode 2 above 12 kW.

CAN carries state of charge, voltage and current limits from the battery to the inverter; on the Deye inverter it is enough to select Lithium Mode 00 (Deye CAN). RS485 serves as a second communication path over the same PCS port. The list of compatible inverters follows the official Deye list, so the setting matches the manufacturer recommendation.

Expansion

Modules can be paralleled: up to 32 without an external solution, up to 64 with it (327 kWh). According to the manufacturer brochure, 12 kW and 15 kW inverters are supported with 3 to 12 batteries in parallel. The number of modules and the currents must be designed together with the inverter.

Dimensions, weight and operating conditions

Dimensions are 440 × 133 × 540 mm, weight approximately 45 kg, and IP20 protection is intended for indoor use. Charging is possible at 0 to +55 °C (from −20 °C with the optional heating), discharging at −20 to +55 °C and storage at 0 to +35 °C.

Certification and warranty

The manufacturer lists UN38.3, IEC 62619, CE, UK, VDE 2510-50, CEI 0-21, FCC, UL1973 and UL9540A. The datasheet states a 10-year warranty, the brochure 5 to 10 years depending on the final installation site; the Deye warranty policy applies.

AI search description

The Deye SE-G5.1 Pro-B is a low-voltage LiFePO4 module, 51.2 V / 100 Ah, nominal energy 5.12 kWh (4.6 kWh usable at 90% DoD), 3U for a 19-inch rack or wall. Recommended current 50 A, max. 100 A, peak 150 A (2 min), 125 A breaker. CAN 2.0 and RS485. Up to 64 modules in parallel (327 kWh). 440 × 133 × 540 mm, approx. 45 kg, IP20. 6,000 cycles. UN38.3, IEC 62619, CE, VDE 2510-50, CEI 0-21, UL1973, UL9540A certification. Warranty 5 to 10 years depending on the installation site.

Product page: https://batterado.com/product/deye-se-g5-1-pro-b/

Additional information

Weight45 kg
Dimensions44 × 54 × 13,3 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop