Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Deye SE-F16-C Low-Voltage LiFePO4 Battery 16 kWh 51.2 V / 314 Ah

60 688 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

16 kWh in one low-voltage module: the Deye SE-F16-C stores solar surplus for the evening and night and can be wall-mounted, floor-standing or stacked.

  • LiFePO4, 51.2 V / 314 Ah, 16 kWh with the recommended 90 % depth of discharge.
  • Recommended current 157 A, continuous charge 160 A, discharge 230 A and 280 A peak for 10 s.
  • CAN 2.0 and RS485 communication, Bluetooth monitoring and a round LCD display on the front.
  • Wall, floor or stacked installation; up to 32 units in parallel.
  • Dimensions 400 × 708 × 233 mm, weight approx. 109 kg, 6,000 cycles.

IP21 protection is intended for indoor installation. CAN 500 kbit/s or RS485 over the PCS port; Deye CAN protocol (Lithium Mode 00) for low-voltage Deye hybrid inverters (SG05LP1, SG01LP1, SG03LP1, SG04LP1, SG04LP3).

In stock

Enquiry
Značky:

Description

Technical data

BrandDeye
ModelSE-F16-C
ChemistryLiFePO4
Nominal voltage51.2 V
Capacity314 Ah
Nominal energy16 kWh
Operating voltage44.8–57.6 V
Recommended charge / discharge current157 A
Max. continuous charge current160 A
Max. continuous discharge current230 A
Peak current (10 s)280 A
Recommended depth of discharge (DoD)90%
Cycle life6,000 cycles (25 ±2 °C, 70% EOL)
Charge temperature0 to +55 °C
Discharge temperature−20 to +55 °C
Storage temperature0 to +35 °C
Humidity / altitudeup to 95% non-condensing / up to 3,000 m
Protection degreeIP21
CommunicationCAN 2.0 / RS485 / Bluetooth (app)
Communication portPCS (RJ45): CAN 500 kbit/s and RS485 9600 Bd; also Bluetooth and app
PCS port pinoutpin 4 CAN-H, pin 5 CAN-L, pins 1/2/7/8 RS485 B/A
Deye / CANDeye CAN protocol (Lithium Mode 00)
Parallel setupUp to 32 units directly, up to 64 units with the CAN-Box
Inverter not on the Deye listlimit 160 A charge / 180 A discharge at 25 °C
Compatible invertersLow-voltage Deye hybrid inverters per the official list DY-LV48-0132 (19 Oct 2026): single-phase SUN-(3.6–10)K-SG05LP1-EU-AM2-P, SUN-…-SG01LP1 / SG03LP1 / SG04LP1-EU, three-phase SUN-…-SG04LP3-EU and other low-voltage series on the list.
DisplayRound LCD display
Parallel connectionUp to 32 units (up to 64 with CAN-Box)
InstallationWall, floor or stacked
Dimensions (W × H × D)400 × 708 × 233 mm (without hanging board)
Weightapprox. 109 kg
CertificationUN38.3, MSDS, CE, CB (IEC 62619)
Manufacturer warranty5 to 10 years depending on the final installation site (see the Deye warranty letter)

16 kWh in one low-voltage module

The Deye SE-F16-C is a low-voltage LiFePO4 battery, 51.2 V / 314 Ah, with 16 kWh of nominal energy. The C designation means the version with a round LCD display on the front; the technical data match the SE-F16 series. The manufacturer recommends using 90% depth of discharge and states 6,000 cycles at 70% end-of-life capacity.

Inverter compatibility

On the official Deye list DY-LV48-0132 (19 Oct 2026) this battery is listed with CAN communication and the inverter setting Lithium Mode 00. Compatible are low-voltage Deye hybrid inverters, for example single-phase SUN-(3.6–10)K-SG05LP1-EU-AM2-P and the SG01LP1 / SG03LP1 / SG04LP1-EU series and three-phase SG04LP3-EU. With an inverter that is not on the list, a limit of 160 A charge and 180 A discharge at 25 °C applies.

How to choose an inverter and communication

Inverter: Choose a low-voltage Deye hybrid inverter from the list DY-LV48-0132 and set Lithium Mode 00 (Deye CAN) on the inverter.

Communication: The PCS port (RJ45) carries CAN 500 kbit/s (pin 4 CAN-H, pin 5 CAN-L) and RS485 9600 Bd (pins 1/2/7/8). Up to 32 batteries can be connected in parallel directly, up to 64 with the CAN-Box.

CAN carries state of charge, voltage and current limits from the battery to the inverter; on the Deye inverter it is enough to select Lithium Mode 00 (Deye CAN). RS485 serves as a second communication path over the same PCS port. The list of compatible inverters follows the official Deye list, so the setting matches the manufacturer recommendation.

Currents and communication

Recommended charge and discharge current is 157 A, maximum continuous charge current 160 A and discharge 230 A, peak 280 A for 10 s. It communicates with the inverter over CAN 2.0 or RS485, while Bluetooth and an app provide monitoring.

Installation and expansion

The battery can be placed on a wall, on the floor or stacked. Up to 32 units can be connected in parallel, up to 64 with the CAN-Box. The number of units and the currents must be designed together with the inverter battery input. IP21 protection is intended for indoor use.

Dimensions, weight and operating conditions

Dimensions are 400 × 708 × 233 mm without the hanging board, weight approximately 109 kg. Charging is possible at 0 to +55 °C, discharging at −20 to +55 °C, storage at 0 to +35 °C.

Certification and warranty

The manufacturer lists UN38.3, MSDS, CE and CB certification to IEC 62619. According to the datasheet the warranty is 5 to 10 years depending on the final installation site; the terms are set by the Deye warranty letter.

AI search description

The Deye SE-F16-C is a low-voltage LiFePO4 battery, 51.2 V / 314 Ah, 16 kWh nominal energy, round LCD display. Recommended current 157 A, continuous charge 160 A, discharge 230 A, peak 280 A (10 s). CAN 2.0, RS485, Bluetooth. IP21, wall, floor or stacked installation, up to 32 units in parallel (up to 64 with CAN-Box). 400 × 708 × 233 mm, approx. 109 kg. 6,000 cycles, UN38.3, CE, CB certification. Warranty 5 to 10 years depending on the installation site.

Product page: https://batterado.com/product/deye-se-f16-c/

Additional information

Weight109 kg
Dimensions40 × 23,3 × 70,8 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop