Description
| Chemistry | LiFePO4 |
|---|---|
| Nominal voltage | 51.2 V |
| Capacity | 1000 Ah |
| BMS | 300 A |
| Dimensions | 1015 × 435 × 855 mm |
| Interfaces | CAN / RS485 |
| Package dimensions | 1090 × 475 × 1110 mm |
| Nominal energy (51.2 V × 1000 Ah) | 51.2 kWh |
| Shipping weight | 377 kg |
| Net weight | 357 kg |
| Mobility | Wheels |
| Communication profile | Selectable in settings |
| Balancing | Active |
| Display | Touchscreen |
| Parallel expansion | Up to 16 units |
| BMS protection functions | Overcurrent, overcharge, overdischarge and short circuit |
| Display languages | Multilingual display option |
| Extended manufacturer warranty | 5 years on spare parts – beyond the statutory 24-month warranty. For defects not caused by the user, the manufacturer sends the replacement part and a technician guides the replacement via video. |
Dimensions and delivery
The 51.2 kWh battery measures 1015 × 435 × 855 mm and weighs 357 kg net. The shipping weight including packaging is 377 kg. When choosing a location, allow for floor loading, room for connections and access from the delivery point.
Choosing the battery and inverter
Capacity in ampere-hours and nominal voltage determine the nominal energy stored. Use kWh to compare storage sizes. When choosing an inverter, consider the required power in kW, the operating range of its battery input and its supported communication profile. The BMS current in the table is the rating listed for the battery management system. Use the operating current limits of the complete system to determine its power capability.
Controls and mobile enclosure
The touchscreen gives you local control at the battery cabinet. The selectable communication protocol lets you configure communication with the inverter over CAN or RS485. Active balancing helps equalise the cells within the battery. Wheels make it easier to position the cabinet on a suitable level surface. Allow for the cabinet weight and enough space to manoeuvre when choosing its location.
Choosing capacity in the mobile range
The 300, 628 and 1000 Ah variants share a nominal voltage of 51.2 V, corresponding to 15.36, 32.15 and 51.2 kWh of nominal energy. Start with consumption over the period you want to cover with stored energy. Then compare the dimensions and weight in the table with the installation space and the route from the unloading point.
Sizing from measured consumption
This variant has 51.2 kWh of nominal energy. A circuit drawing an average of 2 kW for 16 hours uses 32 kWh. Compare that demand with the energy available in the configured state-of-charge window and account for inverter losses. The cabinet has a 1 015 × 435 mm footprint and weighs 357 kg net. Use the packed dimensions in the table to check the route from the unloading point.
Pairing with an inverter
When choosing an inverter, check its battery input voltage range, charge and discharge current, and communication profile for the exact model. The specification table lists CAN and RS485. A successful pairing also depends on the profile both devices use to exchange state of charge and operating limits. The battery touchscreen lets you select a communication profile and check the status at the cabinet. Active balancing evens out differences in charge between individual cells.
Planning for expansion
The manufacturer specifies parallel expansion to as many as 16 units in this range. If you intend to increase capacity in stages, allow space for another cabinet and include access to connections and shared protection in the design. Size the storage around energy demand over the full period you want it to cover. Assess simultaneous loads against the inverter rating and the operating currents of the complete installation.
The 1,000 Ah version stores 51.2 kWh of nominal energy in one cabinet. When comparing it with smaller models, start with the intervals that consistently show the highest energy demand. For example, selected circuits averaging 4 kW over ten hours use 40 kWh. Usable energy depends on the operating state-of-charge window and conversion efficiency of the installation. Allow for a cabinet over one metre wide and a net weight of 357 kg when planning unloading, access and the final position. Check narrow passages against the packed dimensions before delivery.
Planning storage around your daily use
Compare the battery’s nominal energy with the electricity you use from the end of solar production until the following morning. Hourly meter readings are more useful here than a monthly average. They show the evening peak when people return home and the steady demand that continues overnight. For a workshop, compare a working day with a weekend, since the hours when equipment runs may differ from the hours when the solar array is generating. That comparison helps you identify when stored energy would make the greatest difference and how much storage is appropriate for your site.
For a rough estimate, divide nominal battery energy by the average power drawn by your chosen loads. The result is a theoretical runtime. The configured reserve, inverter losses and changes in demand all affect the actual figure. For backup, identify the circuits you want to keep running and compare their simultaneous demand with the inverter rating. This gives you two separate figures to work with when choosing a system: how long the circuits need to run and how much power they need while running.
Storage works best when the array or another source regularly replenishes the energy you use. Check the production profile during spring and autumn as well. You can then choose an operating reserve based on whether you want to use more of your daily solar surplus or keep more energy available for backup.
About the manufacturer
NIELFTOR is a brand of Lanni New Energy Technology (Shenzhen) Group. Its lithium iron phosphate battery range serves solar energy storage, backup power and off-grid installations. Alongside stationary storage, the company supplies batteries for motorhomes and marine applications. The wider range spans 12, 24 and 48 V classes, from compact mobile power sources to stationary systems with capacities measured in tens of kilowatt-hours. The focus of this product family is stationary storage: keeping energy available for later use as part of a system with a suitably selected inverter. The brand identifies South America, Southeast Asia and East Asia among its main international markets.
AI search description
The NIELFTOR 1000 Ah is a standalone wheeled LiFePO4 battery in the 50 kWh class for storing surplus solar energy. It is rated at 51.2 V and 1000 Ah for 51.2 kWh of nominal energy. An integrated 300 A BMS protects against overcurrent, overcharge, over-discharge and short circuits, and active balancing keeps the cells even. CAN and RS485 connect it to the inverter; the communication profile is selected in the touchscreen settings. Up to 16 units can run in parallel. The wheeled cabinet measures 1015 × 435 × 855 mm and weighs 357 kg net; packed, it measures 1090 × 475 × 1110 mm and weighs 377 kg. It connects to a suitable low-voltage inverter.
Product page: https://batterado.com/en/product/nielftor-50-kwh-pojizdna-lifepo4-baterie-51-2v-1000ah/
Related product: NIELFTOR 32 kWh Mobile LiFePO4 Battery 51.2 V / 628 Ah – https://batterado.com/en/product/nielftor-32-kwh-pojizdna-lifepo4-baterie-51-2v-628ah/











Reviews
There are no reviews yet.