Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Victron Energy Phoenix 12/500 VE.Direct pure sine wave inverter 500 VA 12 V / 230 V

4 000 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

12/500 pure sine wave inverter for a 12 V battery: 450 W continuous and 750 W / 3 s peak

  • Pure sine wave 230 V ±3 %, 50 Hz or 60 Hz, adjustable voltage 210–230 V.
  • Continuous power 450 W at 25 °C, peak 750 W / 3 s.
  • Zero-load power 7 W, only 1 W in ECO mode; max. efficiency 86 %.
  • Configurable low battery voltage thresholds and load-dependent dynamic cut-off.
  • VE.Direct port for configuration from a computer or phone (Bluetooth Smart dongle).
  • Protection against short circuit, overload, overheating and unsuitable battery voltage.

An off-grid inverter for a 12 V battery with screw terminals, a steel chassis and the IP 21 protection category; Schuko (CEE 7/4). Dimensions 86 × 172 × 275 mm, weight 3.5 kg. Standards: EN-IEC 60335-1, EN-IEC 62109-1 and ECE R10-4.

In stock

Enquiry

Description

Technical data

BrandVictron Energy
ModelPhoenix Inverter 12/500 230 V VE.Direct
Order codePIN121501210
TypeOff-grid pure sine wave battery inverter (DC/AC), not hybrid
Nominal battery voltage12 V
Continuous power at 25 °C450 W
Continuous power at 40 °C380 W
Time-limited power (cold start)500 W / 1 h
Peak power750 W / 3 s
Max. efficiency86 %
Zero-load power7 W
Default zero-load power in ECO mode (default retry interval 2.5 s, adjustable)1 W
Output AC voltage / frequency (adjustable)230 VAC ±3 %, 50 Hz or 60 Hz ±0.1 %
Adjustable output voltage range210–230 V
Input voltage range9.2–17 V
DC low shut down (adjustable)9.3 V
Dynamic (load dependent) DC low shut down (fully configurable)Dynamic cut-off, see Victron VE.Direct documentation
DC low restart and alarm (adjustable)10.9 V
Battery charged detect (adjustable)14 V
ECO mode stop and start power settingAdjustable
Protectiona–g: output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, DC ripple too high
Battery connectionScrew terminals
Maximum cable cross-section10 mm²
Standard AC outletSchuko (CEE 7/4)
Remote on/offyes
VE.Direct communication portyes
VE.Direct: connection to a computerVE.Direct to USB interface cable (needed)
VE.Direct: connection to smartphones and tablets (Apple, Android), MacBookVE.Direct Bluetooth Smart dongle (needed)
Monitored valuesinput and output voltage, % load, alarms
Automatic transfer switch (accessory)Filax
Battery monitor and battery alarm (Victron range)BMV Battery Monitor, Battery Alarm
Material & colourSteel chassis and plastic cover (blue RAL 5012)
Protection categoryIP 21
Humidity (non-condensing)max. 95 %
Operating temperature range−40 to +65 °C (fan assisted cooling), derate 1.25 % per °C above 40 °C
Dimensions (h × w × d)86 × 172 × 275 mm
Weight3.5 kg
Standard: safetyEN-IEC 60335-1 / EN-IEC 62109-1
Standard: EMCEN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Standard: Automotive DirectiveECE R10-4

Pure sine wave 230 V from a 12 V battery

The Victron Energy Phoenix 12/500 VE.Direct is an off-grid inverter that turns the DC voltage of a 12 V battery into 230 V AC with a pure sine wave shape. The output voltage is 230 VAC ±3 % at 50 Hz or 60 Hz with a tolerance of ±0.1 %. It is a stand-alone battery-to-AC converter, not a hybrid inverter: it has no battery charger and no photovoltaic input, so the unit suits installations where the battery is charged by another source and the inverter only supplies the loads.

Victron states that the full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether it is caused by overload or by a high ambient temperature. A pure sine wave matters for sensitive electronics, chargers, switch-mode power supplies and other equipment that reacts to a distorted voltage with noise or additional losses.

The 12/500 model is intended for a battery with a nominal voltage of 12 V. The number after the slash (500) indicates the power class in VA; the actual continuous and peak power values are given in the next section.

Power: continuous, time-limited and peak

The 12/500 model has four power levels that should be told apart when sizing the system:

  • Continuous power at 25 °C: 450 W.
  • Continuous power at 40 °C: 380 W.
  • Time-limited power (cold start): 500 W / 1 h.
  • Peak power: 750 W / 3 s.

Continuous power falls with temperature, so size the system with the value for the real operating temperature. Above 40 °C the output derates by 1.25 % per °C. According to Victron, the high start-up power is needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

Battery input: voltage range and adjustable thresholds

The input voltage range of the 12/500 is 9.2–17 V. The main thresholds are adjustable; the values below apply to a 12 V battery:

  • DC low shut down: 9.3 V,
  • DC low restart and alarm: 10.9 V,
  • battery charged detect: 14 V.

Victron adds a load-dependent dynamic cut-off, which is fully configurable. The cut-off level adapts to the power drawn, so the battery is not discharged needlessly at low load and the inverter is switched off in time at high load.

Choose the battery type and capacity according to the battery manufacturer’s parameters and the inverter power, and set the adjustable thresholds to match the recommended voltage range of the selected battery. The battery is connected with screw terminals; the maximum cable cross-section is 10 mm².

ECO mode and low zero-load power

The zero-load power of the 12/500 is 7 W (value for 12 V). In ECO mode it drops to 1 W. In this mode the inverter switches to standby when the load falls below a preset value (minimum load: 15 W). In standby it switches on for a short period at adjustable intervals, by default every 2.5 seconds. If the load exceeds the preset level, the inverter stays on.

The ECO mode stop and start power settings are adjustable. ECO mode suits installations where the inverter spends long periods in standby and only occasionally supplies a small load, because it reduces the continuous draw from the battery.

The maximum efficiency of the 12/500 is 86 % (value for 12 V).

Protection and construction

The inverter has protections a to g: output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high and DC ripple too high.

The enclosure is a steel chassis with a plastic cover in blue (RAL 5012). Cooling is fan assisted, the operating temperature range is −40 to +65 °C and humidity may reach 95 % at most, non-condensing. The protection category is IP 21, so the inverter is intended for dry locations.

The dimensions (h × w × d) are 86 × 172 × 275 mm and the weight is 3.5 kg. The inverter has a standard AC outlet: Schuko (CEE 7/4).

VE.Direct: setup and monitoring from a computer or phone

The 12/500 has a VE.Direct communication port. The port can be connected to:

  • a computer, using a VE.Direct to USB interface cable,
  • Apple and Android smartphones, tablets, MacBooks and other devices, using a VE.Direct Bluetooth Smart dongle.

The inverter is fully configurable: low battery voltage alarm trip and reset levels, low battery voltage cut-off and restart levels, dynamic cut-off, an output voltage of 210–230 V, a frequency of 50 Hz or 60 Hz, and ECO mode on/off with its sense level. Input and output voltage, load in per cent and alarms can be monitored. The VictronConnect app is used for setup from a phone.

Accessories and additional functions

The following accessories and functions apply to the 12/500:

  • Remote on/off. A switch can be connected to the two-pole connector, or between battery plus and the left-hand contact of the connector.
  • Filax automatic transfer switch. To transfer the load to another AC source, Victron recommends the Filax automatic transfer switch for its low power inverters. The switchover time is less than 20 milliseconds, so computers and other electronic equipment continue to operate without disruption.
  • LED diagnosis. The meaning of the indications is described in the inverter manual.
  • Battery alarm and BMV monitor. The alarm signals an excessively high or low battery voltage by an audible and visual alarm and by a relay for remote signalling. The BMV battery monitor displays battery voltage, current, consumed Ah or time to go and stores data on the use of the battery.

The battery is connected with screw terminals, which need no special tools for installation.

Installation and wiring in general

The inverter and its power cables should be installed by qualified persons in accordance with the applicable regulations. Before wiring, check that the nominal battery voltage matches the model: the 12/500 is designed for 12 V and the input voltage must lie within 9.2–17 V.

  • Cables. The terminals accept a cable cross-section of up to 10 mm². Keep the leads between the battery and the inverter as short as possible and sized for the current that corresponds to the power, to limit the voltage drop.
  • Location. An inverter with the IP 21 protection category belongs in a dry space. Fan assisted cooling needs free air access.
  • Temperature. Above 40 °C the output power falls by 1.25 % per °C, so allow a power reserve in a hot environment.
  • Output. The load is connected to the outlet of the inverter: Schuko (CEE 7/4).

After wiring, set the battery voltage thresholds and ECO mode to suit the battery used and the type of load.

Applications and standards

The Phoenix 12/500 VE.Direct is typically used where a 12 V battery is available and 230 V with a pure sine wave is needed: in caravans and boats, in cabins, in mobile workshops and for backup power of electronics. It suits smaller loads up to a total continuous power of 450 W at 25 °C and 380 W at 40 °C.

Standards: safety EN-IEC 60335-1 / EN-IEC 62109-1; EMC EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3; Automotive Directive ECE R10-4.

When choosing, compare the continuous power with the power of the loads and the 12 V battery voltage with your battery system. Setup and monitoring of the inverter are possible through the VE.Direct port with a computer or a phone.

AI search description

The Victron Energy Phoenix 12/500 VE.Direct (order code PIN121501210) is an off-grid pure sine wave inverter for a 12 V battery with a 230 V output at 50 or 60 Hz. Continuous power is 450 W at 25 °C and 380 W at 40 °C, peak power 750 W / 3 s, maximum efficiency 86 %. Input voltage range 9.2–17 V, zero-load power 7 W, 1 W in ECO mode. VE.Direct communication port (computer via VE.Direct to USB cable, phone via Bluetooth Smart dongle). Protection category IP 21, operating temperature −40 to +65 °C, weight 3.5 kg. Use: supplying 230 V loads from a battery, for example in caravans, on boats and for backup power.

Product page: https://batterado.com/product/victron-phoenix-12-500-ve-direct/

Additional information

Weight3,5 kg
Dimensions8,6 × 17,2 × 27,5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop