Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Felicity Solar ZES-50KHP3G01 Set: 50 kW Three-Phase HV Hybrid Inverter + 61.44 kWh Battery

589 535 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

A set for high-voltage energy storage: the Felicity T-REX-50KHP3G01 three-phase hybrid inverter (50 kW) and Felicity LiFePO4 battery modules, 12 × 5.12 kWh, 61.44 kWh in total.

  • Inverter: AC 50 kW (max. 55 kW), 4 MPP trackers × 2 strings, PV up to 65 kW and 1,000 V.
  • Inverter battery input 160–800 V, two inputs 50 A + 50 A, max. efficiency 97.6 %.
  • Battery: LiFePO4 modules of 5.12 kWh each (51.2 V, 100 Ah), at least 6,000 cycles, built-in BMS.
  • On-grid, off-grid and UPS modes, RS485 / CAN communication, Wi-Fi/GPRS monitoring.
  • Inverter IP65, wall mounting, 10-year manufacturer warranty on the inverter.

The set is intended for larger commercial and industrial installations in which the PV array, high-voltage storage and self-consumption are handled by one matched pair from a single manufacturer. The inverter on its own has a separate T-REX-50KHP3G01 page.

In stock

Enquiry

Description

Technical data

BrandFelicity Solar
ModelZES-50KHP3G01
TypeSet: three-phase hybrid inverter + battery modules
Set contents1× T-REX-50KHP3G01 hybrid inverter and 12× Felicity 5.12 kWh LiFePO4 battery module
Inverter in the setT-REX-50KHP3G01
Battery energy in the set61.44 kWh (12 × 5.12 kWh)
Battery voltage classHigh voltage (HV), 160–800 V
Rated AC power50,000 W
Max. AC power55,000 W
PV: max. power65,000 W
PV: max. voltage1,000 V
PV: min. voltage150 V
PV: start voltage250 V
PV: nominal voltage600 V
PV: MPPT range200–850 V
PV: MPPT range at full load450–850 V
PV: max. input current per MPPT36 A × 4
PV: max. short-circuit current per MPPT55 A × 4
PV: number of MPP trackers / strings per tracker4 / 2
Battery: typeLFP (lithium iron phosphate)
Battery: voltage range160–800 V
Battery: number of inputs2
Battery: max. charge / discharge current50 A + 50 A
Grid: nominal voltage220/380 V or 230/400 V AC (−20 % to +15 %)
Grid: connection3W+N+PE / 3W+PE
Grid: nominal frequency50/60 Hz (range 45–55 Hz / 55–65 Hz)
Grid: rated AC output current72.5 A
Grid: max. AC output current79.7 A
Grid: displacement power factor0.8 (leading) to 0.8 (lagging)
Grid: THDI< 3 %
Efficiency: maximum97.6 %
Efficiency: European (Euro)97.0 %
Efficiency: MPPT99.9 %
Protections (integrated)PV surge protection, string reverse polarity, battery surge protection, battery reverse polarity, insulation resistance, RCMU, overcurrent, short circuit, overvoltage, anti-islanding, AC surge protection
Battery communication (BMS) / RS485yes
Battery communication (BMS) / CANyes
Monitoring moduleWi-Fi / GPRS
Felicity HV batteries / RS485 (RJ45 cable)the model is listed in the manufacturer list of Felicity HV batteries
Battery modules: seriesFLH48100
Battery modules: number and energy12 × 5.12 kWh
Battery module: voltage / capacity51.2 V / 100 Ah
Battery module: cell chemistryLiFePO4
Battery module: service lifeat least 6,000 cycles
Battery module: battery managementintegrated BMS
Battery module: communicationCAN 2.0 / RS485 / Wi-Fi / Bluetooth (depending on version)
Set operating modesOn-grid, off-grid, UPS
CoolingSmart cooling
Ingress protectionIP65
Operating temperature−25 to +60 °C (derating above 50 °C)
Relative humidity0–95 %
Max. altitude3,000 m (derating above 2,000 m)
Installationwall-mounted
Inverter dimensions (L × W × H)940 × 340 × 582 mm
Inverter net weight85.6 kg
Inverter gross weight98.4 kg
Inverter packaging dimensions463 × 770 × 1,110 mm
Manufacturer warranty10 years under the Felicity Solar warranty policy

What the ZES-50KHP3G01 set contains

The Felicity Solar ZES-50KHP3G01 is a set for high-voltage energy storage. It consists of two parts: the T-REX-50KHP3G01 three-phase hybrid inverter with a rated output of 50 kW and Felicity LiFePO4 battery modules in a 12 × 5.12 kWh configuration, i.e. 61.44 kWh of energy in total. The set is intended for commercial and industrial installations and larger buildings. It works in on-grid, off-grid and UPS modes and supports operation with a generator.

  • 1× T-REX-50KHP3G01 hybrid inverter, three-phase, 50 kW, high-voltage battery input 160–800 V
  • 12× Felicity LiFePO4 battery module, 5.12 kWh (51.2 V, 100 Ah), 61.44 kWh in total

The inverter and the battery are made by the same manufacturer, Guangzhou Felicity Solar Technology (Felicity Solar / FelicityESS). The inverter parameters on this page come from the manufacturer datasheet, the battery parameters from the data for the set. The inverter on its own has a separate page: Felicity T-REX-50KHP3G01.

LiFePO4 battery modules, 12 × 5.12 kWh

The battery in the set consists of twelve modules from the FLH48100 series. Each module has an energy of 5.12 kWh, a nominal voltage of 51.2 V and a capacity of 100 Ah; the cells are LiFePO4 (lithium iron phosphate). Twelve modules give 61.44 kWh of nominal energy in total. The service life is at least 6,000 cycles and each module has an integrated battery management system (BMS) that monitors voltage, current and temperature.

The communication interface of the modules is CAN 2.0 / RS485 / Wi-Fi / Bluetooth, depending on the version. The modules are modular, so the total energy is built up from their number: twelve in this set.

The battery modules are part of a high-voltage system. Their voltage and current capability match the 160–800 V battery input of the inverter with two inputs of 50 A each.

The T-REX-50KHP3G01 inverter in the set

The Felicity Solar T-REX-50KHP3G01 is a three-phase hybrid inverter with a rated AC power of 50 kW, 55 kW at maximum. In one housing it converts solar energy to alternating current, manages charging and discharging of a high-voltage battery and supplies the grid and loads. The grid works at 220/380 or 230/400 V (within −20 % to +15 %) and 50/60 Hz, with a 3W+N+PE or 3W+PE connection.

The HP designation in the model name means a high-voltage battery. The battery input works in the 160–800 V range and the datasheet lists LFP (lithium iron phosphate) as the battery type. At the same power, high voltage means a much lower current than in 48 V systems and therefore thinner cabling.

The inverter is wall-mounted, has IP65 protection and is intended for larger roofs of commercial and industrial buildings and smaller solar plants where surplus energy is to be stored and self-consumption increased.

PV input: four MPP trackers and voltage up to 1,000 V

The inverter has four independent MPP trackers, each with two strings, eight strings in total. The maximum power of the PV array is 65 kW. The maximum input voltage is 1,000 V, the minimum 150 V, the start voltage 250 V and the nominal voltage 600 V.

The MPPT range is 200–850 V, 450–850 V at full load. The maximum input current is 36 A on each of the four trackers, the short-circuit current 55 A per tracker. According to the datasheet the maximum power point tracking (MPPT) efficiency is 99.9 %.

Four trackers make it possible to divide the array between several roof surfaces with different orientation, tilt or shading.

Battery input 160–800 V with two inputs

The battery input works in the 160–800 V range. The inverter has two battery inputs, each with a charge and discharge current of 50 A, so 50 A + 50 A in total. The datasheet lists LFP as the battery type.

Two inputs make it possible to connect two separate strings of battery modules. The capacity and configuration of the battery storage are determined by the documentation of the battery used.

Scheduled charging and discharging is set on the inverter, and its behaviour towards the battery is governed by the communication with the battery management system (BMS) described below.

Grid, efficiency and protections

The rated AC output current is 72.5 A and the maximum 79.7 A. The displacement power factor can be set from 0.8 leading to 0.8 lagging and the current distortion THDI is below 3 %. The frequency range is 45–55 Hz at 50 Hz and 55–65 Hz at 60 Hz.

According to the datasheet the maximum efficiency is 97.6 %, the European (Euro) efficiency 97.0 % and the MPPT efficiency 99.9 %.

The inverter has integrated protections: surge protection on the PV side, string reverse polarity protection, surge protection on the battery side, battery reverse polarity protection, insulation resistance monitoring, RCMU (residual current monitoring), protection against overcurrent, short circuit and overvoltage, anti-islanding and surge protection on the AC side.

Communication and monitoring

Communication with the battery management system (BMS) runs over RS485 or CAN. A Wi-Fi / GPRS module is used for monitoring, allowing remote supervision of the inverter.

How to choose a battery and communication

This set already includes the battery, so you choose the whole: the inverter and twelve modules from the same manufacturer. What matters is whether the high-voltage class (160–800 V), the energy of 61.44 kWh and the output of 50 kW suit you. For smaller buildings a smaller set may fit better; for larger loads, go by the required power and daily consumption.

Communication between the inverter and the battery runs through the inverter BMS interface, which is RS485 or CAN. In the manufacturer’s list of Felicity high-voltage batteries the T-REX-50KHP3G01 is listed with the RS485 protocol and an RJ45 cable. The modules themselves offer CAN 2.0 / RS485 / Wi-Fi / Bluetooth.

If you later expand the set or replace modules, compare the voltage range (160–800 V), the communication protocol and the 50 A on each of the two inverter inputs against the manufacturer documentation.

At high voltage the current is lower, so the cabling is simpler than in 48 V systems.

Construction, environment and installation

The inverter is mounted on a wall with a wall bracket. Its dimensions are 940 × 340 × 582 mm, net weight 85.6 kg, gross weight 98.4 kg and package dimensions 463 × 770 × 1,110 mm. Given the weight, plan for a solid load-bearing wall and two people for handling.

Leave enough free space around the inverter for heat dissipation.

The manufacturer provides a 10-year warranty under the Felicity Solar warranty policy.

The operating temperature is −25 to +60 °C; above 50 °C the inverter reduces its output. Relative humidity is 0–95 %. The maximum altitude is 3,000 m, with derating above 2,000 m. Cooling is intelligent (Smart cooling). IP65 means protection against dust and water jets.

AI search description

The Felicity Solar ZES-50KHP3G01 is a set for high-voltage energy storage: the T-REX-50KHP3G01 three-phase hybrid inverter (50 kW, max. 55 kW) and Felicity LiFePO4 battery modules, 12 × 5.12 kWh, 61.44 kWh in total. The inverter has 4 MPP trackers × 2 strings, PV input up to 65 kW and 1,000 V, a 160–800 V battery input with two inputs of 50 + 50 A, max. efficiency of 97.6 % and IP65 protection. Battery communication is RS485 or CAN, monitoring via Wi-Fi/GPRS. The modules offer at least 6,000 cycles and a built-in BMS. The set operates in on-grid, off-grid and UPS modes.

Product page: https://batterado.com/product/felicity-zes-50khp3g01/

Additional information

Weight581,2 kg
Dimensions94,0 × 34,0 × 58,2 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop