Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Felicity Solar FLH48100UMG2 5.12 kWh 51.2 V 100 Ah LiFePO4 rack battery module (high-voltage FLH48100UG2 system)

36 147 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

5.12 kWh rack battery module for the high-voltage FLH48100UG2 system: the Felicity FLH48100UMG2 has LiFePO4 cells, 51.2 V / 100 Ah, LED and LCD indication and is connected in series with further modules in a rack with the FLH48100UCG2 control unit.

  • Nominal module voltage 51.2 V; a system of 5 to 17 modules in series has 256 to 870 V and 25.6 to 87.04 kWh
  • Recommended current 50 A, maximum continuous current 100 A, depth of discharge 90 %
  • Service life of at least 6,000 cycles (0.5C, 25 ± 2 °C, end of life at 70 % capacity)
  • The system consists of the FLH48100UCG2 control unit and the FLH48100R13G2 rack (13 levels) or R9G2 (9 levels)
  • RS485 / CAN communication through the control unit; CB IEC 62619:2022 and CE-EMC certificates; 10-year manufacturer warranty

The module measures 482.6 × 565 × 133 mm and weighs 41.3 kg. It is designed for rack mounting and IP21 protection suits dry indoor rooms. It talks to the inverter through the control unit and forms a complete system together with it and the rack.

In stock

Enquiry
SKU: FLH48100UMG2
Category: ,
Tags: , , ,
Značky:

Description

Technical data

BrandFelicity Solar
ModelFLH48100UMG2
TypeRack battery module of the high-voltage FLH48100UG2 system (series connection); the FLH48100UCG2 control unit and the rack are separate items
ChemistryLiFePO4
Nominal module voltage51.2 V
Module capacity100 Ah
Nominal module energy5.12 kWh
Number of modules in series5 to 17
System energy (5 / 8 / 12 / 17 modules)25.6 / 40.96 / 61.44 / 87.04 kWh
Nominal system voltage (5 / 8 / 12 / 17 modules)256 / 409.6 / 614.4 / 870 V
System operating voltage (5 / 8 / 12 / 17 modules)232–288 / 371.2–460.8 / 556.8–691.2 / 788.8–979.2 V
Recommended charge / discharge current50 A
Max. continuous charge / discharge current100 A (depends on temperature and state of charge)
Depth of discharge (DoD)90 %
Service life≥ 6,000 cycles (0.5C, 25 ± 2 °C, end of life at 70 % capacity)
Cell typeLiFePO4
Cell configuration in the module1P16S (according to the manufacturer’s battery marking)
ProtectionsSmart BMS, circuit breaker, fuse
Display and indicationLED and LCD; the LCD helps to identify a faulty module
Module front panelPower plug (red and black), two communication ports LINK0 and LINK1, RUN and ALM LEDs, handles
System communicationRS485 / CAN (provided by the FLH48100UCG2 control unit); Wi-Fi and Fsolar cloud
Module addressingAutomatic recognition of virtual addresses without DIP switches (according to the manufacturer)
Inverters / RS485via the FLH48100UCG2 control unit
Inverters / CANvia the FLH48100UCG2 control unit
System control unitFelicity FLH48100UCG2 (1 pc per system)
RackFelicity FLH48100R13G2 (13 levels) or R9G2 (9 levels), separate item
Inverter compatibilityDetermined by the FLH48100UCG2 control unit; the system datasheet gives RS485 / CAN communication
Protection ratingIP21
InstallationRack mounting
Charging temperature0 to +55 °C
Discharging temperature−20 to +55 °C
Storage temperature (not in operation)0 to +35 °C
Relative humidity5–95 %
Altitudeup to 2,000 m
Dimensions (W × D × H)482.6 × 565 × 133 mm
Net weight41.3 kg
Gross weight45 kg
Package dimensions687 × 562 × 250 mm
Manufacturer warranty10 years (subject to the manufacturer’s warranty terms)
Package contentsFLH48100UMG2 battery module; the control unit and the rack are separate items
Certification: battery safetyCB IEC 62619:2022 (DEKRA, NL-123038, 14 Jan 2026), system FLH48100UG2M5–M16
Certification: equipment safetyCB IEC 62040-1:2017 + AMD1:2021 + AMD2:2022 (DEKRA, 15 Jan 2026), system FLH48100UG2
Certification: electromagnetic compatibilityCE-EMC SZNTC2511037EV00 (EN IEC 61000-6-1, 61000-6-2, 61000-6-3, 61000-6-4)

Battery module of the high-voltage FLH48100UG2 rack system

The Felicity FLH48100UMG2 is a battery module of the FLH48100UG2 rack system. It contains LiFePO4 cells, a nominal voltage of 51.2 V and a capacity of 100 Ah, i.e. 5.12 kWh of energy per module. According to the manufacturer’s datasheet, the system consists of FLH48100UMG2 battery modules, the FLH48100UCG2 control unit and the FLH48100R13G2 or R9G2 rack.

The modules are connected in series, so the system voltage grows with their number: five modules give a 256 V system, eight 409.6 V, twelve 614.4 V and seventeen 870 V. They suit home and commercial photovoltaic systems with a high-voltage inverter that communicates with the battery over RS485 or CAN. The battery stores PV surpluses and returns them in the evening, at night or during a grid outage, provided the inverter supports this.

System: the module works together with the FLH48100UCG2 control unit and the FLH48100R13G2 rack (or the smaller R9G2) to form a complete system; the control unit handles communication with the inverter.

System voltage, energy and currents

The manufacturer’s datasheet gives four system configurations:

  • 5 modules: 25.6 kWh, nominal voltage 256 V, operating voltage 232–288 V
  • 8 modules: 40.96 kWh, 409.6 V, operating voltage 371.2–460.8 V
  • 12 modules: 61.44 kWh, 614.4 V, operating voltage 556.8–691.2 V
  • 17 modules: 87.04 kWh, 870 V, operating voltage 788.8–979.2 V

The number of modules in series is 5 to 17 according to the datasheet.

The recommended charge and discharge current is 50 A and the maximum continuous current 100 A; the manufacturer notes that it depends on temperature and state of charge. Because the modules are connected in series, the current does not add up: the voltage grows, and so does the power at the same current. The depth of discharge is 90 %.

Service life and temperatures

The manufacturer states a service life of at least 6,000 cycles at 0.5C and a temperature of 25 ± 2 °C, with end of life defined as a drop to 70 % capacity. The depth of discharge is 90 %. LiFePO4 cells are among the most stable lithium chemistries and are the standard for home battery storage.

Charging is possible from 0 to +55 °C and discharging from −20 to +55 °C. For storage outside operation the manufacturer gives 0 to +35 °C. Relative humidity may be 5–95 % and the altitude up to 2,000 m. IP21 protection suits dry indoor rooms such as a utility room or a dry cellar without condensation.

Discharging is possible even below 0 °C (down to −20 °C).

Safety and protections

Every module has a smart BMS that monitors cell voltages, currents and temperatures and disconnects the battery in a dangerous state. The datasheet also lists a circuit breaker and a fuse. LEDs show the status of the module, and the LCD display helps to find a faulty module within the assembly.

LiFePO4 chemistry is thermally more stable than other lithium cells. The front page of the FLH48100UG2 system datasheet also mentions an aerosol fire-extinguishing system and a rack with integrated grounding; both are part of the complete system.

A system of 17 modules reaches up to 979.2 V as a high-voltage accumulator.

What the system needs: control unit and rack

The FLH48100UMG2 battery module is designed for the FLH48100UG2 system. According to the manufacturer’s datasheet, the following belong to it:

  • Control unit FLH48100UCG2 (482.6 × 565 × 150 mm, 10.3 kg): the control (BMU) unit of the system with RS485 / CAN communication, Wi-Fi and the Fsolar cloud and automatic recognition of the virtual module addresses without DIP switches. One unit per system.
  • Rack FLH48100R13G2 (590 × 532 × 2,087.5 mm, 49 kg): a 13-level rack with integrated grounding. The manufacturer also offers the smaller R9G2 rack (590 × 532 × 1,515.5 mm, 37.7 kg).

The control unit and the rack form the complete system with the modules. The modules are inserted into the rack and connected in series with power cables; the number of modules is chosen according to the required system voltage and energy and to the inverter.

How to choose an inverter and communication

The FLH48100UMG2 battery module communicates with the inverter through the control unit. Communication with the inverter is provided by the FLH48100UCG2 control unit, and the manufacturer’s datasheet gives an RS485 / CAN communication port. Compatible are inverters with a high-voltage battery input that communicate with a high-voltage lithium battery over RS485 or CAN.

When choosing, proceed as follows:

  • A high-voltage battery input covers the operating voltage of the chosen number of modules (e.g. 371.2–460.8 V for 8 modules).
  • It communicates with the inverter over RS485 or CAN.
  • The maximum continuous current is 100 A, the recommended one 50 A.
  • The system can be built from 5 to 17 modules.

Rack installation

The modules are designed for a rack. The front of the module carries a power plug (red and black), two communication ports LINK0 and LINK1, RUN and ALM indicators and handles for insertion. The modules slide into the levels of the rack and are connected with power cables in series and with communication cables.

The module measures 482.6 × 565 × 133 mm, i.e. the standard 19-inch width, and weighs 41.3 kg. The FLH48100R13G2 rack has 13 levels and, according to the datasheet, is 2,087.5 mm high. According to the manufacturer the rack stands on a solid floor and comes with grounding.

Package contents and certification

Package contents: FLH48100UMG2 battery module. The control unit and the rack are separate components of the system. The gross weight of the module with packaging is 45 kg and the package measures 687 × 562 × 250 mm.

Certification: for a system with the FLH48100UMG2 module and the FLH48100UCG2 control unit the following are available: a CB certificate to IEC 62619:2022 (DEKRA, no. NL-123038, 14 Jan 2026, systems FLH48100UG2M5 to M16), a CB certificate to IEC 62040-1:2017 including amendments AMD1:2021 and AMD2:2022 (DEKRA, 15 Jan 2026) and a CE-EMC certificate no. SZNTC2511037EV00 (Shenzhen Nore Testing Center, 9 Dec 2025) covering EN IEC 61000-6-1:2019, 61000-6-2:2019, 61000-6-3:2021 and 61000-6-4:2019.

The manufacturer gives a 10-year warranty on the battery under its warranty terms.

AI search description

The Felicity FLH48100UMG2 is a rack battery module of the high-voltage FLH48100UG2 system, LiFePO4, 51.2 V / 100 Ah, 5.12 kWh. The modules are connected in series (5 to 17 pieces, 25.6 to 87.04 kWh, 256 to 870 V), recommended current 50 A, continuous 100 A, depth of discharge 90 %, service life at least 6,000 cycles. The system consists of the FLH48100UCG2 control unit (RS485 / CAN, Wi-Fi) and the FLH48100R13G2 or R9G2 rack. The module has LED and LCD indication, a smart BMS, a circuit breaker and a fuse, IP21, 482.6 × 565 × 133 mm, 41.3 kg. CB IEC 62619:2022 and CE-EMC certificates, 10-year warranty.

Product page: https://batterado.com/product/felicity-flh48100umg2/

Additional information

Weight41,3 kg
Dimensions48,26 × 56,5 × 13,3 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop