Description
Technical data
| Brand | Victron Energy |
|---|---|
| Model | SmartShunt 500 A / 50 mV |
| Order code | SHU050150050 |
| Type | Battery monitor without display (Bluetooth) |
| Shunt rating | 500 A / 50 mV |
| Supply voltage range | 6.5–70 V DC |
| Current draw | < 1 mA |
| Battery capacity (adjustable) | 1–9999 Ah |
| Measures second battery voltage, temperature or midpoint | yes |
| Input voltage range, auxiliary battery | 6.5–70 V DC |
| Temperature measurement range | −20 to +50 °C |
| Resolution: current | ± 0.01 A |
| Resolution: voltage | ± 0.01 V |
| Resolution: amp hours | ± 0.1 Ah |
| Resolution: state of charge (0–100 %) | ± 0.1 % |
| Resolution: time to go | ± 1 min |
| Resolution: temperature (with optional sensor, 0–50 °C) | ± 1 °C / °F |
| Accuracy of current measurement | ± 0.4 % |
| Current offset | less than 10 mA |
|---|---|
| Accuracy of voltage measurement | ± 0.3 % |
| Shunt connection bolts | M10 bolts |
| Bluetooth | yes, VictronConnect app |
| VE.Direct communication port | yes |
| Connection to GX devices | via VE.Direct cable |
| Stored trends (number of days) | 46 |
| Stored trends data | battery voltage, current, state of charge and the aux input (battery temperature, midpoint deviation or starter battery voltage) |
| Bluetooth range | typically 10–15 m (the shunt and cables reduce the range) |
| Dimensions (H × W × D) | 46 × 120 × 54 mm |
| Protection category | IP21 |
| Operating temperature range | −40 to +50 °C |
| Included in the package | two cables with 1 A fuse for the “+” connection and the starter battery or midpoint connection |
| Optional accessories | temperature sensor (ASS000100000); VE.Direct Bluetooth Dongle (ASS030536011) |
| Safety | EN 60335-1 |
| Emission / Immunity | EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3 |
| Automotive | EN 50498 |
A battery monitor without a display
The SmartShunt 500 A / 50 mV is a complete battery monitor in a single housing, only without a display. Your phone or tablet acts as the display: the shunt communicates over Bluetooth with the VictronConnect app and all monitored parameters are shown conveniently on screen. It is a sensible alternative to the BMV series where the battery has to be monitored, but you do not want to run a cable to a panel or install an additional instrument. The measuring part is a 500 A / 50 mV current shunt with M10 bolt terminals, with the electronics built right onto it. The battery, loads and chargers have to be routed through the shunt and the measuring electronics supplied from the battery.
What the SmartShunt measures
The SmartShunt measures battery voltage, charge and discharge current, consumed amp hours, state of charge in the range 0–100 % and the remaining time at the present load. Resolution is 0.01 A for current, 0.01 V for voltage, 0.1 Ah for amp hours, 0.1 % for state of charge and 1 minute for time to go. Accuracy of the current measurement is ± 0.4 % and of the voltage measurement ± 0.3 %. The current offset of this model is less than 10 mA. Battery capacity can be set in the range 1–9999 Ah, so the monitor fits small and large batteries alike. The supply voltage is 6.5–70 V DC and the monitor itself draws less than 1 mA, so it practically does not load the battery.
Auxiliary input: second battery, midpoint, temperature
Besides the main measurement, the SmartShunt has an auxiliary input. Depending on need, it can measure the voltage of a second battery, for example an engine starter battery, measure the battery midpoint voltage, or take a temperature sensor. Midpoint monitoring helps to detect an imbalance early in batteries connected in series: one bad cell or one bad battery can damage the whole expensive battery bank. The voltage on the auxiliary input can be measured in the range 6.5–70 V DC. The temperature sensor is not included; Victron offers it as an optional accessory (ASS000100000), and the temperature measurement range is −20 to +50 °C. The stored trends also cover the auxiliary input value.
Bluetooth and the VictronConnect app
The SmartShunt has Bluetooth built into the device. The VictronConnect app for phone or tablet is used for settings and to conveniently read all monitored battery parameters, such as state of charge, time to go and historical information. The shunt stores trends for the last 46 days. The shunt and the electric cables negatively influence the Bluetooth range; the resulting range of 10–15 m is satisfactory in most cases. The proximity of other conducting elements, such as the metal chassis of a vehicle or seawater around the hull of a boat, may reduce the range. The solution is to add a VE.Direct Bluetooth Dongle (ASS030536011) and switch off Bluetooth in the SmartShunt.
Connection to a GX device and the VRM portal
The SmartShunt can also be connected to a GX device, for example a Color Control GX. The connection is made with a VE.Direct cable. The GX device then shows the battery data on its display, passes it on to the system and, once connected to the internet, also to the Victron VRM portal, where the battery can be monitored remotely. In a system with a Victron inverter/charger or solar charge controller, you thus have the battery data in one place. Always verify the exact compatibility and settings in the Victron documentation of your GX device.
Choosing the current rating and add-ons
The SmartShunt range is available for 300 A, 500 A, 1000 A and 2000 A. Choose the 500 A / 50 mV model according to the highest continuous and peak current that will flow through the system; the shunt has to match the current load of the whole system including inverters and chargers. Shunt dimensions grow with the current rating; for this model they are 46 × 120 × 54 mm. Besides the temperature sensor and the Bluetooth dongle, the monitor can be complemented with a GX device for display and remote monitoring. The SmartShunt has no programmable visual or audible alarm and no programmable relay; if you need them, the BMV-712 Smart monitor offers them.
Which systems the SmartShunt suits
The supply voltage range of 6.5–70 V DC covers common 12, 24 and 48 V systems, so the same monitor can be used in home storage, in a caravan, on a boat or in backup power. The 500 A / 50 mV model is intended for systems with higher currents, where accurate measurement matters for proper charge and discharge control. Because the SmartShunt has no display, it fits where the battery is watched from a phone or from a GX device and no separate panel is needed. If you want a device with its own display, a programmable alarm or relay, the BMV-712 Smart monitor is the right choice.
Installation in general
The shunt is wired into the negative conductor between the battery negative terminal and the rest of the system, that is the loads and chargers, according to the diagram in the Victron documentation. All loads and chargers connect on the load side of the shunt, otherwise their current would not be measured. M10 bolts require suitable cable lugs and the tightening torque specified in the manual. The two supplied cables with a 1 A fuse are for the positive connection and for the starter battery or midpoint connection. Installation and wiring should be done by qualified persons according to the applicable regulations and the manufacturer’s manual. When choosing the location, consider the IP21 rating: the shunt belongs in a dry space.
Operation and monitoring
After the first wiring, the battery capacity and other parameters are entered in the VictronConnect app and the monitor starts counting the state of charge. Historical data and trends help to evaluate the usage and health of the battery. In operation, it is recommended to watch mainly the state of charge, voltage, current and time to go. When the SmartShunt is connected to a GX device, the same data is available through the VRM portal. The operating temperature is −40 to +50 °C. Standards: safety EN 60335-1, emission and immunity EN-IEC 61000-6-1, 61000-6-2 and 61000-6-3, automotive standard EN 50498.
AI search description
Victron Energy SmartShunt 500 A / 50 mV (order code SHU050150050) is a Bluetooth battery monitor without a display. It measures voltage, current, consumed Ah, state of charge 0–100 % and time to go. Supply 6.5–70 V DC, current draw below 1 mA, battery capacity 1–9999 Ah. Auxiliary input for a second battery, battery midpoint or temperature sensor. Display in the VictronConnect app over Bluetooth, VE.Direct port for connection to GX devices. 500 A shunt, M10 bolts, dimensions 46 × 120 × 54 mm, IP21, operating temperature −40 to +50 °C. Use: monitoring the battery state in home, caravan, marine and backup systems.
Product page: https://batterado.com/product/victron-smartshunt-500a/














Reviews
There are no reviews yet.