Description
Technical data
| Brand | Victron Energy |
|---|---|
| Model | Blue Smart IP22 Charger 12/20 (1), 230 V |
| Order code | BPC122042002 |
| Battery nominal voltage | 12 V |
| Number of outputs | 1 |
| Input voltage range | 180 – 265 V AC |
| Frequency | 45 – 65 Hz |
| Charge current, normal mode | 20 A |
| Charge current, NIGHT or LOW | 10 A |
| Efficiency | 93 % |
| No load power consumption | 0.5 W |
| Charge voltage absorption (Normal | High | Li-ion) | 14.4 V | 14.7 V | 14.2 V |
| Charge voltage float (Normal | High | Li-ion) | 13.8 V | 13.8 V | 13.5 V |
| Charge voltage storage (Normal | High | Li-ion) | 13.2 V | 13.2 V | 13.5 V |
| Charge algorithm | 6-stage adaptive: test, bulk, absorption, recondition, float, storage; Li-ion: bulk, absorption, float |
| Can be used as power supply | yes |
| Protection | battery reverse polarity (fuse), output short circuit, over temperature |
| NIGHT and LOW modes | output current max. 50 % of nominal, charger totally noiseless; NIGHT ends automatically after 8 hours, LOW manually |
| MODE button | NORMAL (14.4 V) / HIGH (14.7 V) / RECONDITION / LI-ION |
| Status indication | 11 LEDs: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY |
|---|---|
| Bluetooth Smart | yes, VictronConnect app |
| History log | statistics of the last 40 charge cycles and lifetime usage data |
| VE.Smart Networking | yes; synchronised parallel charging of up to 10 chargers; enabled on serial numbers HQ2024xxxxx and later |
| Battery monitor compensation | Smart Battery Sense, BMV-712 Smart Battery Monitor or SmartShunt (voltage and temperature; BMV-712 and SmartShunt also current) |
| Parallel operation | models with different current ratings can be paralleled and synchronised |
| Operating temperature range | -40 to +60 °C (full rated output up to 40 °C) |
| Humidity (non-condensing) | max 98 % |
| Material and colour | aluminium (blue RAL 5012) |
| Battery connection | screw terminals 16 mm² / AWG 6 |
| 230 VAC connection | 1.5 m cable with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ) |
| Protection category | IP22 |
| Weight | 1.3 kg |
| Dimensions (h × w × d) | 235 × 108 × 65 mm |
| Standards – safety | EN 60335-1, EN 60335-2-29 |
| Standards – emission | EN 55014-1, EN 61000-6-3, EN 61000-3-2 |
| Standards – immunity | EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |
| Standards – automotive | ECE R10-5 |
What the Blue Smart IP22 12/20 does
The Blue Smart IP22 is a range of adaptive six-stage chargers with a microprocessor that continuously adapts charging to the way the battery is used. The single-output 12/20 charges 12 V batteries at 20 A and works as both a charger and a power supply. Bluetooth Smart allows wireless monitoring of voltage and current, changing settings and updating the charger when new features become available.
The manufacturer states efficiency of up to 94 % across the range (93 % for this model), so the charger generates up to four times less heat than the industry standard. After full charge the consumption drops to 0.5 W.
Main benefits
- Adaptive six-stage algorithm: test, bulk, absorption, recondition, float and storage.
- Fully programmable algorithm: absorption, float and storage voltages, recondition and temperature compensation are set over Bluetooth; in expert mode practically all parameters and time limits.
- Li-ion: lithium batteries are charged with a simple bulk, absorption and float algorithm.
- NIGHT and LOW: current at most 50 % of nominal and completely silent operation.
- History: statistics of the last 40 charge cycles.
- VE.Smart Networking: wireless communication with other Victron products.
Charge algorithm and modes
The six-stage algorithm consists of test, bulk, absorption, recondition, float and storage. The MODE button selects NORMAL (14.4 V), HIGH (14.7 V), RECONDITION and LI-ION. Eleven LEDs show the charge phase: TEST, BULK, ABSORPTION, RECONDITION, FLOAT, STORAGE and READY.
Storage mode starts when the battery has not been discharged for 24 hours. The float voltage is reduced to 2.2 V per cell (13.2 V for a 12 V battery), which minimises gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to equalise the battery. According to the manufacturer this prevents stratification of the electrolyte and sulfation, major causes of early battery failure.
Choosing a battery and recovery of discharged batteries
The charger charges lead-acid batteries and also Li-ion batteries. For lithium batteries the recommendation of their manufacturer always applies. The recovery function starts charging even if the battery has been discharged to zero volts and reconnects to a fully discharged Li-ion battery with an internal disconnect function.
On overheating the output current is reduced up to 50 °C ambient temperature, but the charger does not fail. Full rated output is available up to 40 °C. The 12/20 delivers a current of 20 A in normal mode and 10 A in NIGHT or LOW mode.
VE.Smart Networking and synchronised charging
The VE.Smart Network is a wireless communication network between Victron products using Bluetooth Smart. A Smart Battery Sense, BMV-712 Smart Battery Monitor or SmartShunt can pass battery voltage and temperature to one or more chargers; the BMV-712 and SmartShunt also pass current. The battery current can be used, for example, to switch from absorption to float at a set tail current.
Up to ten chargers in a VE.Smart network can be synchronised so that they charge the battery as if they were one large charger. They switch from one state to another simultaneously. Benefits are redundancy, flexibility (simply add another charger), lower cost of several smaller chargers and easier installation in a confined space. Models with different current ratings can be paralleled and synchronised. The feature is enabled on serial numbers HQ2024xxxxx and later.
Protection and operating conditions
The charger is protected against battery reverse polarity (by a fuse), output short circuit and over temperature. The operating range is -40 to +60 °C and humidity up to 98 % non-condensing. The housing is aluminium (blue RAL 5012) with IP22, i.e. for dry indoor environments.
In NIGHT or LOW mode the output is limited to half of the nominal current and the charger is completely noiseless. NIGHT ends automatically after eight hours, LOW can be ended manually.
Installation in general
The battery is connected with screw terminals of 16 mm² (AWG 6); the 1.5 m mains cable ends in a CEE 7/7, BS 1363 (UK) or AS/NZS 3112 (AU/NZ) plug. Dimensions are 235 × 108 × 65 mm (h × w × d), weight 1.3 kg.
For proper cooling leave free space around the charger and bear in mind that the output current is reduced at higher ambient temperatures. Size the fuse and the battery cable according to the battery manufacturer and the charger manual.
Operation and VictronConnect
The VictronConnect app shows the voltage and current of the charger, lets you change settings and update the firmware. The history screen contains data covering the lifetime of the charger and detailed statistics of the last 40 charge cycles.
The charger can also be used as a power supply. Among chargers in a VE.Smart network the individual states can be followed and the transitions between them synchronised.
Typical use
The charger suits charging and maintaining 12 V batteries in cars, boats, caravans, backup systems and workshops. For larger batteries or higher current another charger can be added to the VE.Smart network. Combining it with a battery monitor enables more accurate voltage and temperature compensation and ending absorption at a tail current.
AI search description
The Victron Blue Smart IP22 12/20 (230 V, 1 output), order code BPC122042002, is an adaptive 20 A charger for 12 V batteries (10 A in NIGHT/LOW mode), efficiency 93 %, no-load consumption 0.5 W. Six-stage algorithm, lead-acid and Li-ion batteries, Bluetooth Smart with VictronConnect, VE.Smart Networking with synchronisation of up to 10 chargers and compensation from a Smart Battery Sense, BMV-712 or SmartShunt. IP22 aluminium housing, 235 × 108 × 65 mm, 1.3 kg.
Product page: https://batterado.com/product/victron-blue-smart-ip22-12-20/











Reviews
There are no reviews yet.