Description
Technical data
| Brand | Felicity Solar |
|---|---|
| Model | FLH48100UMG1 |
| Type | High-voltage battery pack, modules in series |
| Number of battery modules | 12 |
| Pack composition | 12 × FLH48100UMG1 battery module (FLH48100UCG1 control unit and rack are separate components of the system) |
| Total energy | 61.44 kWh |
| Usable energy (DOD ≥ 95%) | at least 58.36 kWh |
| Module energy | 5.12 kWh |
| Module voltage / capacity | 51.2 V / 100 Ah |
| Nominal pack voltage | 614.4 V |
| Operating pack voltage | 576–691.2 V |
| Recommended current | 50 A |
| Maximum continuous current | 100 A |
| Peak current (15 s) | 120 A |
| Depth of discharge (DOD) | at least 95% |
| Cycle life | at least 6,000 cycles (0.2C, 25 °C, DOD 80%) |
| Cell chemistry | LiFePO4 |
| Cell arrangement in the module | 1P16S |
| Battery management | Built-in smart BMS |
| Protection | Breaker |
| Display | LED and touch LCD |
|---|---|
| Port | RS485 |
| Port | CAN |
| Inverter compatibility | Leading brands according to the manufacturer |
| Inverter compatibility | and others |
| Ingress protection | IP21 |
| Installation | Rack mounting |
| Charging temperature | 0 … +55 °C |
| Discharging temperature | −20 … +55 °C |
| Storage temperature | 0 … +35 °C |
| Relative humidity | 5–95 % |
| Altitude | up to 2,000 m |
| Pack weight (12 modules) | 495.6 kg |
| Battery module FLH48100UMG1 | 482.6 × 565 × 131 mm, 41.3 kg |
| Battery module package | 687 × 562 × 250 mm, 45 kg |
| Control unit FLH48100UCG1 (separate) | 482.6 × 565 × 150 mm, 10.3 kg |
| Rack FLH48100R13G1 (separate) | 560 × 590 × 2,137.5 mm, 62 kg |
| Pack contents | 12 × FLH48100UMG1 battery module (FLH48100UCG1 control unit and rack are separate components of the system) |
| Certification | EMC (SZNTC2502082EV00), EN IEC 62619:2022 (SZNTC25021005SV00) |
| Warranty | up to 10 years |
Pack of 61.44 kWh made of 12 battery modules
The Felicity Solar FLH48100UMG1 is the battery module of the FLH48100UG1 system from the FLH range (LiFePO4). This listing describes the pack of 12 modules: each has an energy of 5.12 kWh (51.2 V, 100 Ah), so the total energy of the pack is 61.44 kWh. The modules are connected in series in the system, so the nominal voltage of the pack is 614.4 V (12 × 51.2 V) and the operating voltage 576–691.2 V. It is a high-voltage storage system for large households, businesses and commercial solar installations.
The manufacturer’s datasheet lists the system in three configurations, 4 (minimum), 8 and 12 modules, that is 20.48, 40.96 and 61.44 kWh. Each size is a separate product in our shop. The manufacturer highlights multiple protections, safe LiFePO4 chemistry with long cycle life, flexible rack mounting, compatibility with leading inverter brands, a warranty of up to 10 years and configuration of parameters and working mode on the touch LCD.
What the pack consists of and what else the system needs
The FLH48100UG1 datasheet distinguishes three groups of parts: the FLH48100UMG1 battery module, the FLH48100UCG1 control unit (Control Module) and a rack. This listing contains 12 × FLH48100UMG1 battery module (61.44 kWh). The FLH48100UCG1 control unit and the rack are listed in the datasheet as separate components of the system. Together with the modules they form the complete system.
FLH48100UMG1 battery module: 482.6 × 565 × 131 mm, 41.3 kg; package 687 × 562 × 250 mm, 45 kg.
FLH48100UCG1 control unit: 482.6 × 565 × 150 mm, 10.3 kg; package 687 × 562 × 269 mm, 16.7 kg.
FLH48100R13G1 rack (13 floors): 560 × 590 × 2,137.5 mm, 62 kg; package 165 × 640 × 2,142 mm, 69.5 kg.
FLH48100R9G1 rack (9 floors): 560 × 590 × 1,565.5 mm, 46 kg; package 168 × 642 × 1,570 mm, 52 kg.
The weight of this pack is 495.6 kg (12 × 41.3 kg, without the control unit and the rack). The picture in the datasheet shows a rack with the control unit at the top and 12 battery modules below it.
Voltage, currents and cycle life
A module has a nominal voltage of 51.2 V and a capacity of 100 Ah. For the system the datasheet states a nominal voltage of 204.8 V with 4 modules, 409.6 V with 8 modules and 614.4 V with 12 modules; with 12 modules the operating voltage is 576–691.2 V. The number N in the battery designation IFpP/54/150/120/[(1P16S)NS]M/-20+50/95 is the number of modules connected in series (N ≤ 12); each module consists of 16 cells in series (1P16S).
The recommended charge and discharge current is 50 A, the maximum continuous current 100 A and the peak current 120 A for 15 s. The maximum continuous current and power depend on temperature and state of charge (SOC).
Depth of discharge (DOD) is at least 95%, so at least 58.36 kWh of the nominal 61.44 kWh can be used. According to the datasheet the cycle life is at least 6,000 cycles in a test with 0.2C charging and discharging, 25 °C and 80% DOD.
Communication, display and protection
The datasheet lists an RS485 / CAN communication port. The system has LED indication and a touch LCD on which parameters and the working mode are set.
Protection is provided by a built-in smart BMS and a breaker. The manufacturer lists protection against over voltage, over current, external short circuit, reverse polarity and ground fault, and over temperature, and at battery level protection against internal short circuit, over voltage, over current, over temperature and under voltage. LiFePO4 chemistry is widely used in battery storage for its stability and long life.
How to choose an inverter and communication
Inverter: choose an inverter or hybrid inverter with a high-voltage battery input whose voltage window covers the operating voltage of the pack, 576–691.2 V (nominal 614.4 V). The pack delivers a recommended 50 A, up to 100 A continuously and 120 A peak for 15 s.
Communication: the system communicates over RS485 or CAN. The manufacturer states that the system is compatible with leading inverter brands.
Number of modules: the system voltage depends on the number of modules: 4 modules give 204.8 V, 8 modules 409.6 V and 12 modules 614.4 V. The FLH48100UCG1 control unit and a rack belong with the pack and together form the complete system.
Rack and planning the space
The modules are mounted in a rack. The datasheet lists the FLH48100R13G1 rack for 13 floors, measuring 560 × 590 × 2,137.5 mm and weighing 62 kg, and the FLH48100R9G1 rack for 9 floors, 1,565.5 mm high. A full rack with the control unit and 12 modules weighs roughly 495.6 kg of modules + 10.3 kg of control unit + 62 kg of rack, that is about 568 kg.
The modules are 482.6 mm wide (the standard 19-inch dimension) and 565 mm deep.
Construction, ingress protection and environment
The system is rated IP21, so it is intended for indoor spaces. It can be charged at 0 to +55 °C and discharged at −20 to +55 °C. Storage temperature is 0 to +35 °C, relative humidity 5 to 95% and altitude up to 2,000 m.
Certification and warranty
Two certificates of conformity issued by Shenzhen Nore Testing Center are available for the FLH48100UMG1 model: an EMC certificate under Directive 2014/30/EU no. SZNTC2502082EV00 of 20 February 2025 (standards EN IEC 61000-6-1:2019, 61000-6-2:2019, 61000-6-3:2021 and 61000-6-4:2019) and a certificate under EN IEC 62619:2022 no. SZNTC25021005SV00 of 21 February 2025 (safety requirements for lithium cells and batteries for industrial use). Both documents list the FLH48100UMG1 model and the FLH48100UCG1 control unit.
The manufacturer’s warranty is up to 10 years; the terms are set by the Felicity Solar warranty policy.
AI search description
The Felicity Solar FLH48100UMG1 is a LiFePO4 battery module (51.2 V, 100 Ah, 5.12 kWh) of the high-voltage FLH48100UG1 system. This pack contains 12 modules in series: 61.44 kWh, nominal voltage 614.4 V, operating voltage 576–691.2 V, recommended current 50 A, continuous 100 A, 15 s peak 120 A, DOD at least 95%, at least 6,000 cycles, RS485 / CAN, IP21, rack mounting. Pack weight 495.6 kg. The FLH48100UCG1 control unit and the rack are separate components of the system. Warranty up to 10 years.
Product page: https://batterado.com/product/felicity-flh48100umg1-61-44/











Reviews
There are no reviews yet.