Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Felicity Solar FLA48460TG2-EU Low-voltage battery LiFePO4 23.5 kWh 51.2 V / 460 Ah RS485 CAN

106 075 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

A 23.5 kWh battery for large systems: the Felicity FLA48460TG2-EU offers 51.2 V / 460 Ah, LiFePO4 cells, 250 A continuous, RS485 and CAN communication and can be connected in parallel up to 15 units.

  • Nominal voltage 51.2 V, energy 23.5 kWh, capacity 460 Ah
  • Continuous charge and discharge current 250 A, peak 500 A (15 s)
  • Cycle life of at least 6,000 cycles, depth of discharge at least 95 %
  • Up to 15 units in parallel, series connection is not supported
  • Communication: RS485 / CAN, RJ45 port
  • Ingress protection IP21, floor-standing (chassis with casters)
  • Dimensions 570 × 250 × 980 mm, weight 186.5 kg, manufacturer warranty 10 years

The enclosure measures 570 × 250 × 980 mm and weighs 186.5 kg. It stands on the floor and has a chassis with casters. The IP21 rating suits dry indoor rooms. Capacity can be expanded by connecting units in parallel.

In stock

Enquiry

Description

Technical data

BrandFelicity Solar
ModelFLA48460TG2-EU
TypeLow-voltage battery unit (FLA series)
ChemistryLiFePO4
Nominal voltage51.2 V
Operating voltage44.8–57.6 V
Capacity460 Ah
Nominal energy23.5 kWh
Max. continuous charge / discharge current250 A (depends on temperature and SOC)
Peak current (15 s)500 A
Max. charge / discharge power12,500 W
Depth of discharge (DoD)≥ 95 %
Cycle life≥ 6,000 cycles (25 °C ± 2 °C, 0.5C / 0.5C, 90 % DoD, 70 % EOL)
Parallel connectionUp to 15 units (352.5 kWh)
Cell typeLiFePO4
ProtectionBuilt-in smart BMS, circuit breaker and fuse
Capacity expansionUp to 15 units in parallel; series connection is not supported
Communication portRJ45 (8 pins), CAN / RS485
Port pinout (battery side)1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH
Wiring on the Felicity inverter side (RS485)5 RS485-B, 6 RS485-A
Communication (datasheet)RS485 / CAN
DisplayLCD + LED
Felicity inverters / RS485pin 5 RS485-B, pin 6 RS485-A
Inverters of other brands / CANpins 3 CANL-PCS, 4 CANH-PCS, 7 CANL, 8 CANH
Other brandsthe manufacturer states compatibility with leading inverter brands (CAN communication)
Compatible invertersFelicity inverters, inverters of leading brands according to the manufacturer, and others
Ingress protectionIP21
InstallationFloor-standing (chassis with casters)
Charging temperature0 to +55 °C
Discharging temperature−20 to +55 °C
Storage temperature0 to +35 °C
Product dimensions570 × 250 × 980 mm
Net weight186.5 kg
Gross weight220 kg
Package dimensions1135 × 690 × 465 mm
Manufacturer warranty10 years
Certification: electromagnetic compatibilityCE-EMC, certificate SZNTC2601066EV00 (2 Feb 2026)
Certification: transportUN38.3 (test report FLS2F8S01U01, summary)
Certification: protection verificationprotection verification, report FLS2F8S02W01
Certification: chemical safety and transportGHS, safety data sheet (MSDS), classification for road and sea transport

Low-voltage LiFePO4 battery 23.5 kWh

The Felicity Solar FLA48460TG2-EU is a high-capacity low-voltage LiFePO4 battery with 460 Ah, a nominal voltage of 51.2 V and a nominal energy of 23.5 kWh. It belongs to the FLA-EU series and is the largest unit of this selection: a single enclosure offers the energy that would otherwise take several smaller batteries.

The continuous charge and discharge current is 250 A, the peak current 500 A for 15 s and the power 12,500 W. The battery is intended for residential and small commercial photovoltaic systems with an inverter for a 48 V battery voltage. The enclosure measures 570 × 250 × 980 mm, weighs 186.5 kg and stands on the floor; a chassis with casters makes it easier to move into place. The cycle life is at least 6,000 cycles and the depth of discharge at least 95 %. The manufacturer warranty is 10 years.

Voltage, current and power

The operating voltage of the battery is 44.8–57.6 V at a nominal voltage of 51.2 V. A capacity of 460 Ah at nominal voltage corresponds to a nominal energy of 23.5 kWh. The maximum continuous charge and discharge current is 250 A; the manufacturer notes that it depends on temperature and state of charge. The battery can deliver a peak current of 500 A for 15 s. According to the datasheet the maximum charge and discharge power is 12,500 W.

When units are connected in parallel, their currents and power add up while the voltage stays the same, because the units are placed side by side, in parallel. According to the manufacturer the depth of discharge is at least 95 %, so a large share of the nominal 23.5 kWh is actually usable. The limits of 57.6 V and 44.8 V define the window in which the inverter charges and discharges the battery.

Cycle life and temperature range

According to the manufacturer datasheet the battery reaches at least 6,000 cycles (25 °C ± 2 °C, 0.5C / 0.5C, 90 % DoD, 70 % EOL). A depth of discharge of at least 95 % makes a large part of the nominal energy usable in every cycle. At one cycle per day this corresponds to many years of operation.

Temperature range

  • charging: 0 to +55 °C
  • discharging: −20 to +55 °C
  • storage: 0 to +35 °C

According to the series manual the most suitable ambient temperature is 20–30 °C, with relative humidity of 5–95 % and an altitude of up to 2,000 m.

Parallel connection and capacity expansion

Capacity can be increased by connecting units in parallel: the manufacturer states up to 15 units (352.5 kWh). Two units, for example, have 47 kWh together and a continuous current of 500 A.

Capacity is increased by parallel connection of units; series connection is not supported. For a parallel system the manual recommends a combiner box (BTCB series) or a copper busbar, which distributes the current evenly between the units. The parallel DIP switch sets the battery addresses on the communication bus. According to the manual the start-up order is inverter, battery breaker, button; in a parallel system switching on one battery switches on all of them.

Communication and port wiring

The communication port is an RJ45 connector with eight pins (battery side):
1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH.

For Felicity inverters RS485 communication is used, which on the inverter side uses pins 5 (RS485-B) and 6 (RS485-A). For inverters of other brands the manufacturer specifies CAN communication, that is pins 3 CANL-PCS, 4 CANH-PCS, 7 CANL and 8 CANH. The datasheet of this model lists RS485 and CAN communication. Follow the inverter documentation to determine the correct protocol.

The LCD with LED indication in the black drop-shaped panel on the front shows the battery status.

How to choose the inverter and communication

The right choice of inverter decides whether the battery can use its full output and whether the system can control charging according to the state of the cells. Proceed as follows:

  • Voltage: the battery has a nominal voltage of 51.2 V and works in the range 44.8–57.6 V, so it belongs to the 48 V class.
  • Current and power: compare the charge and discharge current of the inverter with the continuous current of 250 A of one unit and with the number of batteries connected in parallel.
  • Communication: Felicity inverters communicate with the battery over RS485; inverters of other brands over CAN. The manufacturer states compatibility with leading inverter brands.
  • Protocol: Felicity batteries communicate over CAN or RS485.

With manual inverter setup, the charge and discharge voltage and current limits are set according to the battery manual. Communication is preferable, because the inverter then receives the real state of charge and the current limits from the BMS.

Installation, ingress protection and construction

The unit measures 570 × 250 × 980 mm and weighs 186.5 kg, 220 kg packed. The unit stands on the floor; in the photograph it has a chassis with casters and recessed handles on the side that make handling the 186.5 kg easier. The ingress protection is IP21 is suited to installation in dry indoor rooms.

The package measures 1135 × 690 × 465 mm.

Protection and safety

The battery contains a built-in smart BMS which monitors the voltage, current and temperature of the cells and protects them against overcharge, over-discharge, overcurrent and short circuit. A circuit breaker and a fuse are included; according to the datasheet the fuse is external.

Before any work on the wiring, switch the battery off in the order given in the manual.

Certification and warranty

For the FLA48460TG2-EU the following are available: CE-EMC certificate no. SZNTC2601066EV00 of 2 February 2026, the UN38.3 test report (FLS2F8S01U01) with its summary, the protection verification report (FLS2F8S02W01), the GHS classification, the safety data sheet (MSDS) and documents for road and sea transport. The test reports are issued under the development designation FLA-L460.

The manufacturer warranty is 10 years. The warranty conditions are given in the manufacturer warranty information. The data in this description come from the manufacturer datasheet and user manual; the manufacturer reserves the right to change parameters as part of continuous development.

AI search description

The Felicity FLA48460TG2-EU is a high-capacity low-voltage LiFePO4 battery, 51.2 V, 460 Ah, 23.5 kWh, operating voltage 44.8–57.6 V. Continuous charge and discharge current 250 A, peak 500 A for 15 s, power 12,500 W, depth of discharge at least 95 %, cycle life at least 6,000 cycles. Up to 15 units in parallel (352.5 kWh), series connection is not supported. RS485 and CAN communication (RJ45 port), LCD + LED display. BMS, breaker, fuse, ingress protection IP21. Floor installation, chassis with casters, 570 × 250 × 980 mm, 186.5 kg. CE-EMC certificate SZNTC2601066EV00. Warranty 10 years.

Product page: https://batterado.com/product/felicity-fla48460tg2-eu/

Additional information

Weight186,5 kg
Dimensions57,0 × 25,0 × 98,0 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop