Description
Technical data
| Brand | Felicity Solar |
|---|---|
| Model | FLA48171-EU |
| Type | Low-voltage battery unit (FLA series) |
| Chemistry | LiFePO4 |
| Nominal voltage | 51.2 V |
| Operating voltage | 44.8–57.6 V |
| Capacity | 171 Ah |
| Nominal energy | 8.75 kWh |
| Max. continuous charge / discharge current | 120 A (depends on temperature and SOC) |
| Peak current (15 s) | 150 A |
| Peak charge / discharge power (15 s) | 6,000 W |
| Depth of discharge (DoD) | ≥ 95 % |
| Cycle life | ≥ 6,000 cycles |
| Parallel connection | Up to 15 units (131.5 kWh) |
| Cell type | LiFePO4 |
| Protection | Built-in smart BMS, circuit breaker and fuse |
| Series connection of units | Not supported |
| Communication port | RJ45 (8 pins), CAN / RS485 |
| Port pinout (battery side) | 1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH |
| Wiring on the Felicity inverter side (RS485) | 5 RS485-B, 6 RS485-A |
| Communication (datasheet) | RS485 / CAN; built-in Wi-Fi and Bluetooth |
|---|---|
| Display | LCD + LED |
| Felicity inverters / RS485 | pin 5 RS485-B, pin 6 RS485-A |
| Inverters of other brands / CAN | pins 3 CANL-PCS, 4 CANH-PCS, 7 CANL, 8 CANH |
| Felicity inverters | IVCM, IVEM, IVPS/M, IVGM (RS485) |
| Other brands | the manufacturer states compatibility with leading inverter brands (CAN communication) |
| Compatible inverters | Felicity inverters, inverters of leading brands according to the manufacturer, and others |
| Ingress protection | IP21 |
| Installation | Wall-mounted or floor-mounted |
| Charging temperature | 0 to +55 °C |
| Discharging temperature | −20 to +55 °C |
| Storage temperature | 0 to +35 °C |
| Product dimensions | 735 × 433 × 188 mm |
| Net weight | 68 kg |
| Gross weight | 88 kg |
| Package dimensions | 849 × 550 × 362 mm |
| Manufacturer warranty | 10 years |
| Certification: transport | UN38.3 (test report GDFLS2F6E02U01, summary) |
| Certification: protection verification | test report of the protections against overcharge, short circuit and over-discharge according to IEC 62619:2022 and IEC 63056:2020 (GDFLS2F6E02W01) |
| Certification: chemical safety and transport | GHS, safety data sheet (MSDS), classification for road and sea transport |
Low-voltage LiFePO4 battery 8.75 kWh
The Felicity Solar FLA48171-EU is a low-voltage battery unit with LiFePO4 cells, a nominal voltage of 51.2 V and a nominal energy of 8.75 kWh. According to the manufacturer certification documents it corresponds to a capacity of 171 Ah. It belongs to the FLA-EU series and is intended for residential and small commercial photovoltaic systems with an inverter for a 48 V battery voltage.
The battery stores surplus photovoltaic energy and returns it in the evening, at night or during a grid outage, where the inverter allows this. A continuous current of 120 A and a peak current of 150 A for 15 s are enough for common household loads. The unit sits in a white enclosure with a round LCD on the front. It measures 735 × 433 × 188 mm, weighs 68 kg and can be mounted on a wall or placed on the floor. The depth of discharge is at least 95 %, the cycle life at least 6,000 cycles and the manufacturer warranty 10 years.
Voltage, current and power
The operating voltage of the battery is 44.8–57.6 V at a nominal voltage of 51.2 V. A capacity of 171 Ah at nominal voltage corresponds to a nominal energy of 8.75 kWh. The maximum continuous charge and discharge current is 120 A; the manufacturer notes that it depends on temperature and state of charge. The battery can deliver a peak current of 150 A for 15 s. The peak charge and discharge power is 6,000 W for 15 s.
When units are connected in parallel, their currents and power add up while the voltage stays the same, because the units are connected side by side in parallel. According to the manufacturer the depth of discharge is at least 95 %, so a large share of the nominal 8.75 kWh is actually usable. When selecting an inverter, compare its maximum charge and discharge current with the values of the battery so that neither side limits the other. The limits of 57.6 V and 44.8 V define the window in which the inverter charges and discharges the battery.
Cycle life and temperature range
According to the manufacturer datasheet the battery reaches at least 6,000 cycles. A depth of discharge of at least 95 % makes a large part of the nominal energy usable in every cycle. At one cycle per day this corresponds to many years of operation.
Temperature range
- charging: 0 to +55 °C
- discharging: −20 to +55 °C
- storage: 0 to +35 °C
According to the series manual the most suitable ambient temperature is 20–30 °C, with relative humidity of 5–95 % and an altitude of up to 2,000 m.
Parallel connection and capacity expansion
Capacity can be increased by connecting units in parallel: the manufacturer states up to 15 units (131.5 kWh). Two units, for example, have 17.5 kWh together and a continuous current of 240 A.
Series connection of units is not supported. For a parallel system the manual recommends a combiner box (BTCB series) or a copper busbar, which distributes the current evenly between the units. The parallel DIP switch sets the battery addresses on the communication bus. According to the manual the start-up order is inverter, battery breaker, button; in a parallel system switching on one battery switches on all of them.
Communication and port wiring
The communication port is an RJ45 connector with eight pins (battery side):
1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH.
For Felicity inverters RS485 communication is used, which on the inverter side uses pins 5 (RS485-B) and 6 (RS485-A). For inverters of other brands the manufacturer specifies CAN communication, that is pins 3 CANL-PCS, 4 CANH-PCS, 7 CANL and 8 CANH. According to the datasheet, the built-in Wi-Fi and Bluetooth allow remote monitoring of the battery data through the FSolar app. The RS485 and CAN interface is the same as on the other batteries of the FLA series.
The LCD shows voltage, current or power, the state of charge (SOC) and error messages; LED indication complements it.
How to choose the inverter and communication
The right choice of inverter decides whether the battery can use its full output and whether the system can control charging according to the state of the cells. Proceed as follows:
- Voltage: the battery has a nominal voltage of 51.2 V and works in the range 44.8–57.6 V, so it belongs to the 48 V class.
- Current and power: compare the charge and discharge current of the inverter with the continuous current of 120 A of one unit and with the number of batteries connected in parallel.
- Communication: Felicity inverters communicate with the battery over RS485; inverters of other brands over CAN. The manufacturer states compatibility with leading inverter brands.
- Protocol: Felicity batteries communicate with the inverter over CAN or RS485.
Communication is preferable, because the inverter then receives the real state of charge and the current limits from the BMS.
Installation, ingress protection and construction
The unit measures 735 × 433 × 188 mm and weighs 68 kg, 88 kg packed. According to the datasheet the unit can be mounted on a wall or placed on the floor. The ingress protection is IP21 is suited to installation in dry indoor rooms.
The package measures 849 × 550 × 362 mm.
Protection and safety
The battery contains a built-in smart BMS which monitors the voltage, current and temperature of the cells and protects them against overcharge, over-discharge, overcurrent and short circuit. A circuit breaker and a fuse are included; according to the datasheet the fuse can be replaced easily from the outside. A built-in aerosol fire-extinguishing module adds protection inside the enclosure.
Before any work on the wiring, switch the battery off in the order given in the manual.
Certification and warranty
For the FLA48171-EU the manufacturer provides these test documents: the UN38.3 test report (GDFLS2F6E02U01) with the corresponding summary, the test report on the protections against overcharge, short circuit and over-discharge according to IEC 62619:2022 and IEC 63056:2020 (GDFLS2F6E02W01), plus the GHS classification, the safety data sheet (MSDS) and documents for road and sea transport. The datasheet names no standard in its certification line, so no other certificates are listed here.
The manufacturer warranty is 10 years. The warranty conditions are given in the manufacturer warranty information.
AI search description
The Felicity FLA48171-EU is a low-voltage LiFePO4 battery unit, 51.2 V, 8.75 kWh (171 Ah), operating voltage 44.8–57.6 V. Continuous charge and discharge current 120 A, peak 150 A for 15 s, peak power 6,000 W, depth of discharge at least 95 %, cycle life at least 6,000 cycles. Up to 15 units in parallel (131.5 kWh), series connection is not supported. RS485 and CAN communication (RJ45 port), built-in Wi-Fi and Bluetooth, LCD and LED display. Built-in BMS, breaker, fuse and aerosol fire-extinguishing module, ingress protection IP21. Wall or floor installation, 735 × 433 × 188 mm, 68 kg. Manufacturer warranty 10 years.
Product page: https://batterado.com/product/felicity-fla48171-eu/










Reviews
There are no reviews yet.