Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Felicity FLB48314TG1-H Floor-Standing LiFePO4 Battery 16 kWh 51.2 V / 314 Ah

67 157 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

16 kWh in one floor-standing battery: the Felicity FLB48314TG1-H offers 314 Ah at 51.2 V, cell heating and IP65 protection.

  • Built-in BMS with breaker and fuse, aerosol fire-extinguishing system.
  • -H version with heating: charging and discharging from −20 to +55 °C.
  • Recommended current 80 A, continuous 160 A, 300 A peak for 15 s.
  • RS485 and CAN for the inverter, Wi-Fi and Bluetooth for the FSolar app.
  • Dimensions 450 × 235 × 895 mm, net weight 121 kg.

Up to 32 units can be paralleled (512 kWh); the manufacturer specifies at least 8,000 cycles and a 10-year warranty. Before choosing an inverter, compare the voltage range and communication profile of its battery input.

In stock

Enquiry

Description

Technical data

BrandFelicity Solar
ModelFLB48314TG1-H
ChemistryLiFePO4
Nominal voltage51.2 V
Capacity314 Ah
Nominal energy16 kWh
Operating voltage44.8–57.6 V
Recommended charge / discharge current80 A
Max. continuous charge / discharge current160 A (depends on temperature and state of charge)
Peak current (15 s)300 A
Depth of discharge (DoD)≥ 95 %
Cycle life≥ 8,000 cycles (25 ±2 °C, 0.5C, 90% DoD, 70% EOL)
Charge and discharge temperature−20 to +55 °C (built-in heating)
Storage temperature0 to +35 °C
Humidity / altitude5–95% / ≤ 2,000 m
Protection degreeIP65
CommunicationRS485 / CAN
Communication portRJ45 (8 pins): CAN and RS485
Port pinout (battery side)1 CAN-GND, 2 +5V-BUS, 3 CANL-PCS, 4 CANH-PCS, 5 RS485-B, 6 RS485-A, 7 CANL, 8 CANH
Wiring on the inverter sidepins 3 CANL, 4 CANH, 5 RS485-B, 6 RS485-A; CAN is on pins 3/4, wire the cable according to this table
Victron / CANCAN communication per the Felicity manual
Solis / CANCAN communication per the Felicity manual
SOFAR / CANCAN communication per the Felicity manual
SolaX / CANCAN communication per the Felicity manual
Sol-Ark / CANCAN communication per the Felicity manual
Megarevo / CANCAN communication per the Felicity manual
Luxpower / CANCAN communication per the Felicity manual
Deye / RS485RS485 communication per the Felicity manual
Parallel setupUp to 32 batteries (512 kWh) via a Felicity BTCB0606 / BTCB0303 combiner box or a busbar; series connection is not supported
Without communication (manual inverter setting)max. charging voltage 57.6 V, float voltage 57.6 V, cut-off voltage 44.8 V, recommended charging current 80 A, max. 160 A × number of batteries
Compatible invertersVictron, Solis, SOFAR, SolaX, Sol-Ark, Megarevo, Luxpower (CAN), Deye (RS485) and more.
MonitoringWi-Fi / Bluetooth (FSolar app)
DisplayLED
Parallel connectionUp to 32 units (512 kWh)
ProtectionBuilt-in smart BMS, breaker and fuse
Fire protectionAerosol fire-extinguishing system
InstallationFloor-mounted
Dimensions450 × 235 × 895 mm
Net weight121 kg
Package dimensions548 × 424 × 958 mm
Shipping weight143 kg
CertificationUN38.3 (transport of lithium batteries)
Manufacturer warranty10 years under the manufacturer warranty policy

Sixteen kilowatt-hours in one floor-standing unit

The Felicity FLB48314TG1-H combines 16 LiFePO4 cells in series (51.2 V) with a capacity of 314 Ah. The result is 16 kWh of nominal energy for shifting daytime photovoltaic production into the evening and night. Depth of discharge is at least 95%, so a large part of the nominal energy is available for use. The battery connects to a suitable low-voltage inverter with a battery voltage range of 44.8–57.6 V.

Heated version for charging from −20 °C

The -H designation means the version with built-in heating. According to the manufacturer datasheet, charging and discharging are both possible from −20 to +55 °C, which extends use to unheated rooms as well. Storage is specified at 0 to +35 °C, operating humidity is 5–95% and altitude up to 2,000 m.

Currents and communication

Recommended charge and discharge current is 80 A, maximum continuous current 160 A and peak current 300 A for 15 seconds. Continuous current depends on temperature and state of charge. RS485 and CAN interfaces connect to the inverter, while the FSolar app provides monitoring over Wi-Fi and Bluetooth.

Inverter compatibility

According to the official Felicity manuals for low-voltage batteries, the battery communicates with inverters over CAN (Victron, Solis, SOFAR, SolaX, Sol-Ark, Megarevo, Luxpower) and over RS485 (Deye). The manufacturer also states compatibility with leading inverter brands. All communication rows are in the technical overview above.

How to choose an inverter and communication

Inverter: Inverters with a 51.2 V battery input (44.8–57.6 V), for example Victron, Solis, SOFAR, SolaX, Sol-Ark, Megarevo or Luxpower over CAN, or Deye over RS485. Without communication, set the inverter manually: charge and float voltage 57.6 V, cut-off voltage 44.8 V, charging current 80 A.

Communication: The RJ45 port carries both CAN and RS485. On the inverter side pins 3 (CANL), 4 (CANH), 5 (RS485-B) and 6 (RS485-A) are connected; CAN is therefore on pins 3/4, and the cable is wired according to the pinout table. Up to 32 batteries can be connected in parallel via a BTCB0606 / BTCB0303 combiner box or a busbar.

Over CAN or RS485 the battery reports state of charge, voltage and current limits to the inverter, so charging and discharging are governed by the battery BMS and the inverter follows its data. Monitoring is additionally provided by the built-in Wi-Fi and Bluetooth in the FSolar app.

Protection and safety

The built-in smart BMS is supplemented by a breaker and a fuse; the manufacturer describes an external fuse design for easier replacement. IP65 protection guards against dust and water jets, and an aerosol fire-extinguishing system adds fire protection inside the enclosure. An LED display shows battery status.

Expansion to 512 kWh

Up to 32 units can be connected in parallel, giving 512 kWh of nominal energy at the same 51.2 V. Capacity can therefore grow step by step with real consumption.

Dimensions, weight and delivery

The battery measures 450 × 235 × 895 mm and weighs 121 kg; the shipping package measures 548 × 424 × 958 mm and weighs 143 kg. Installation is on the floor. The photographs show castors at the bottom edge that help move the unit into position.

Certification and warranty

A UN38.3 test summary according to the Manual of Tests and Criteria, Rev. 8, is available for the FLB48314TG1-H for the transport of lithium batteries. The manufacturer states a 10-year warranty under its warranty policy.

AI search description

The Felicity FLB48314TG1-H is a floor-standing low-voltage LiFePO4 battery, 51.2 V / 314 Ah, with 16 kWh of nominal energy and built-in heating for charging and discharging from −20 to +55 °C. Recommended current 80 A, continuous up to 160 A, peak 300 A for 15 s. RS485 / CAN communication, Wi-Fi and Bluetooth monitoring (FSolar). IP65, built-in BMS, breaker, fuse and aerosol fire-extinguishing system. Up to 32 units in parallel (512 kWh). Dimensions 450 × 235 × 895 mm, 121 kg, package 548 × 424 × 958 mm and 143 kg. 10-year manufacturer warranty.

Product page: https://batterado.com/product/felicity-flb48314tg1-h/

Additional information

Weight143 kg
Dimensions45 × 23,5 × 89,5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop