Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

SuFeng 16S white battery enclosure with BMS and LCD

12 781 Kč

Seller: PFCom.Info s.r.o. – not registered for VAT

The white SuFeng JKLR015 V3.0 upright enclosure brings together a cabinet for sixteen prismatic LiFePO₄ cells, a JK BMS, a front display and assembly hardware. Choose the enclosure alone or the kit with sixteen EVE MB31 cells, providing a nominal 51.2 V and 16.08 kWh after assembly. The upright shape uses a compact footprint, while the casters help position the cabinet during preparation. The BMS provides 2 A active balancing and interfaces for inverter communication over CAN or RS485. The front LCD keeps battery information accessible at the cabinet. The technical overview lists the enclosure dimensions, internal drawing measurements, protection rating and temperature ranges. It also gives MB31 cell dimensions with and without terminals and the 123 mm terminal centre spacing, so you can compare the cells and supplied assembly parts before ordering.

Enquiry
SKU: SFG-STORAGE16
Category:

Description

Technical specifications

SpecificationValue
Product typeWhite wheeled battery enclosure kit, 16S
Management and displayBMS and LCD included
Assembly hardwareAssembly accessories included
Cell configuration16 × EVE MB31 LiFePO₄, 3.2 V and 314 Ah per cell
Nominal voltage once assembled51.2 V
Nominal capacity once assembled314 Ah
Nominal energy once assembled16.08 kWh (51.2 V × 314 Ah)
EVE MB31LiFePO₄ · 3.2 V · 314 Ah · 16 matching cells in series (16S) · 51.2 V / 16.08 kWh
Cell specificationValue
Cell formPrismatic
Body width173.7 ± 0.5 mm
Body thickness71.7 ± 0.8 mm
Nominal cell energy1,004.8 Wh (3.2 V × 314 Ah)
Enclosure modelJKLR015 V3.0
Internal drawing dimensions584 × 346 × 210 mm (±5 mm)
Display modelV19 LCD-4.3-TTL-P
BMS module dimensions300 × 100 × 18 mm
Disassembled dimensions845 × 485 × 220 mm
Carton weight per manual26.5 kg
Standard enclosure rating per manualIP55
Enclosure operating temperature−20 … +60 °C
Enclosure storage temperature−40 … +70 °C
CoolingNatural airflow
P+/P− power terminals2 · Cu
DC circuit breaker1
Casters2
Epoxy insulation parts20
Aluminium connecting parts2.0 mm · 1 + 2 + 1
Inverter connectionRS485-1 / CAN
Battery interconnectRS485-2
Controls and indicatorsRST · ADD · DRY · RUN/ALM · SOC
EVE MB31 cell length173.7 ± 0.5 mm
Cell height with / without terminals207.2 ± 0.5 / 204.6 ± 0.5 mm
Cell thickness at delivery SOC under 300 ± 20 kgf compression71.7 ± 0.8 mm
EVE MB31 terminal centre spacing123.0 ± 0.3 mm
EVE MB31 cell weight5.6 ± 0.3 kg

Upright JKLR015 V3.0 enclosure

Allow for the height of the upright cabinet as well as the floor area. The drawing gives approximately 819 mm in height, 416 mm in width and 285 mm in depth. The manual lists a separate set of dimensions for the disassembled cabinet. Use the internal drawing measurements with their stated tolerance when comparing the layout of the supports and electronics. The casters help move the empty cabinet into position before assembly. The mechanical equipment includes insulation and parts for holding the cells in place. The manual's IP55 rating and stated temperature ranges describe the enclosure. For the assembled storage system, also check the applicable operating conditions of the selected cells and electronics.

Choosing the enclosure and the cells

This SuFeng enclosure brings the mechanical parts, display and battery management hardware together for a low-voltage storage project. Start with the installation space, the chosen cell model and the communication requirements of your inverter. The enclosure drawing shows the available space and the position of the parts. The cell datasheet supplies the electrical ratings, dimensions and tolerances. The BMS documentation describes the monitoring functions and interfaces. The technical tables above bring these details together for this version of the enclosure.

A 51.2 V build with EVE MB31

The documented MB31 configuration uses sixteen prismatic lithium iron phosphate cells. Each cell is rated at 3.2 V and 314 Ah. In a 16S connection, the cell voltages add up to 51.2 V and the capacity remains 314 Ah. These ratings give approximately 16.08 kWh of nominal energy. When choosing a battery size, use the operating window of the planned system to estimate how much of that nominal energy will be available in everyday use. The enclosure, cells and inverter each have their own specifications and contribute to the completed system.

Checking the mechanical fit

Compare the cell length, thickness and overall height before selecting a set of cells. The height of the body is useful when checking the supports, while the height over the terminals determines the space needed for connections and covers. The table gives both heights and the manufacturer's tolerances for the MB31. The stated thickness of 71.7 mm applies at the delivery state of charge and under the specified compression force. When comparing a drawing with a measurement from another source, check that both refer to the same reference points and measurement conditions.

Terminal centres and busbars

The MB31 terminal centre spacing is 123.0 ± 0.3 mm. Use this dimension together with the terminal orientation, the location of each contact on the case and the shape of the supplied interconnects. Two cells with the same ampere-hour rating may have different mechanical layouts. For a different cell model, compare its drawing with the supports and busbar geometry for this enclosure. A matched set of sixteen cells simplifies the choice of parts because the dimensions and terminal pattern can be checked once for the entire set.

Battery management and current

The kit includes the JK-PB2A16S-20P BMS. It monitors the cells and uses active balancing to reduce differences between them. The balancing current is 2 A. The 200 A figure identifies the current class of the BMS. When planning the operating current of the completed pack, consider the cell specification, inverter settings and ratings of the power connections together. This distinction is particularly useful when comparing the available BMS hardware with the continuous charge and discharge requirements of a project.

Display and battery information

The front display provides a local view of the battery when you are standing at the enclosure. Allow access to the display and controls when deciding where the cabinet will sit. More detailed cell information can be viewed through the JK monitoring functions described in the documentation. During commissioning, the displayed values help you compare the cell voltages and review the selected configuration. Planning the location of the cabinet with the display and terminals in mind also makes later checks easier.

Inverter communication

Compare the inverter's battery voltage window with the planned pack and identify its required battery communication profile. CAN and RS485 describe the communication interfaces. An application profile defines how the inverter and battery exchange and interpret information. Match the port, cable and profile to the equipment in your installation. The table lists the interfaces and the information available for this enclosure. The inverter documentation and the installed BMS version provide the details for the final configuration.

Space and handling

Use the external dimensions to check the installation area, the route to that area and access to the lid, terminals and controls. Allow room for the cable routes and for the parts that need to remain accessible after the cells are fitted. Sixteen MB31 cells at a nominal 5.6 kg each account for about 89.6 kg before adding the enclosure and its equipment. Plan the supporting surface and handling of the completed battery using the assembled weight, rather than the shipping weight of the cabinet.

Planning the purchase

The enclosure, JK BMS, display and assembly accessories form the basis of the kit. Choose the enclosure on its own or the kit including sixteen EVE MB31 cells for assembly. When planning the purchase, keep the exact model of the enclosure, the set of sixteen cells and the inverter requirements together in the same parts list. The downloadable technical overview is useful when comparing the drawing and cell data or checking clearances at the installation site. The information in the tables identifies the actual configuration and the components to check before ordering.

For AI search

SuFeng 16S (SFG-STORAGE16) is a battery enclosure kit for a 16-cell EVE MB31 build. It includes a white wheeled enclosure, BMS, LCD and assembly accessories. With the sixteen EVE MB31 314 Ah cells included in the cell kit option, the assembled battery has a nominal voltage of 51.2 V and nominal energy of 16.08 kWh.

Technical overview (Markdown)

Additional information

Weight26,5 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop