# SuFeng 48-280-S1-01 – rack 16S battery enclosure with JK BMS

Options: enclosure only or kit including sixteen EVE MB31 cells. The cell kit is supplied for battery assembly by the buyer.

SuFeng’s horizontal steel enclosure combines space for 16 LiFePO₄ cells, a front display and a JK BMS with 2 A active balancing. A build with EVE MB31 cells has a nominal voltage of 51.2 V and nominal energy of 16.08 kWh.

| | |
|---|---|
| Cells | 16S LiFePO₄ · 280 / 306 / 314 Ah · EVE MB31 (314 Ah) |
| Nominal voltage and energy with MB31 | 51,2 V · 16,08 kWh |
| BMS and balancing | JK-PB2A16S-20P · 200 A BMS · 2 A |
| Ports | CAN · RS485-1 · RS485-2 · RS232 · DRY |
| Dimensions, weight, enclosure rating | 750 × 439 × 252 mm · 30 kg · IP60 |
| Enclosure ambient temperature | −30 to +50 °C |
| CAN profiles | Deye LV Hybrid · Growatt LV Rev.05 · Victron BMS 201707 · INVT BMS V1.02 · GoodWe LV BMS V1.7 · Pylontech V1.2 |
| RS485 profiles | Growatt ESS V2.01 · SRNE PACE Modbus · Pylontech LV · Voltronic |
| Additional profile | SMA V1.0 |
| Compatibility and settings | Deye SUN-5K-SG03LP1-EU · Growatt SPF 3000TL HVM-48 · Victron Cerbo GX · INVT BD5KTL-RL1 · GoodWe GW5000-ES-20 · SRNE HF2430S60-100 |
| Cell busbars | 15 × 99 × 20 × 2 mm + 1 × 85 × 20 × 2 mm |
| Network cable length | 500 mm |
| Deye LV Hybrid CAN | 500 kbit/s |
| Growatt ESS RS485 / SRNE PACE Modbus | 9 600 bit/s |
| Epoxy insulation plates | 2 × 600 × 175 × 0.7 mm; 4 × 600 × 200 × 0.7 mm; 18 × 202 × 173 × 0.5 mm |
| EVA foam | 6 × 180 × 160 × 3.5 mm; 2 × 610 × 60 × 2 mm |
| Fasteners | 36 × M6 / 36 × M6 / 24 × M4 × 8 |
| Washers / flange nuts / screws | 36 / 36 / 24 |
| Spring latches | 3 |
| Socket in parts list | M6 · 10 × 80 mm · 1× |
| Network cable in parts list | Cat 6 · 500 mm · 1× |
| Power terminals | 2 × P+ / 2 × P− |
| Parallel addressing | DIP 1–4 · 0–15 |
| Bluetooth mobile app | Android ≥ 7 |
| EVE MB31 cell length | 173.7 ± 0.5 mm |
| Cell height with / without terminals | 207.2 ± 0.5 / 204.6 ± 0.5 mm |
| Cell thickness at delivery SOC under 300 ± 20 kgf compression | 71.7 ± 0.8 mm |
| EVE MB31 terminal centre spacing | 123.0 ± 0.3 mm |
| EVE MB31 cell weight | 5.6 ± 0.3 kg |

## Choosing cells and building the battery

This enclosure is a starting point for a low-voltage storage build. The EVE MB31 configuration uses sixteen 3.2 V, 314 Ah cells. Wired in series, they provide a nominal 51.2 V at 314 Ah. The horizontal steel case houses the cells and control electronics together.

## Battery management and communication

The JK BMS actively balances the cells at 2 A. The 200 A rating applies to the BMS. Set the assembled battery’s operating current according to the chosen cells. Select the interface and application profile for the inverter. The Victron unit listed is the Cerbo GX communications gateway.
