# V-TAC VT-48290 — 16.07 kWh floor-standing LiFePO₄ battery, IP65, on wheels

- Manufacturer: V-TAC
- Order code: 12789
- Product page: https://batterado.com/en/product/v-tac-vt-48290-16-07-kwh-lifepo4-battery-ip65/
- Updated: 2026-11-10

**16 kWh in a single IP65 cabinet with its own fire-suppression module and wheels.** The V-TAC VT-48290 gives a house, a cabin or a workshop a large energy reserve with no modules to stack: roll it in, plug in two power cables and one data cable, and the storage is at work. It suits solar self-consumption, backup during outages and cheap overnight charging.

- 51.2 V / 314 Ah / 16.07 kWh from sixteen LiFePO₄ cells
- up to 150 A, around 7.7 kW for the inverter
- at least 7,000 cycles at 90% depth of discharge
- discharges from −20 to +60 °C, charges from 0 to +55 °C
- aerosol fire-suppression module built into the battery
- TBESS app over Bluetooth and Wi-Fi
- CAN and RS485, compatible with Deye inverters and others
- up to 15 batteries in parallel, more than 240 kWh in total
- power and communication cables in the box

## Choose an inverter for the battery

The VT-48290 is a 51.2 V low-voltage battery that talks to the inverter over CAN or RS485. The manufacturer lists it in joint certificates with Deye hybrid inverters; from our range, the three-phase [Deye SUN-10K-SG05LP3-EU-SM2](https://batterado.com/en/product/deye-sun-10k-sg05lp3-eu-sm2-10-kw-three-phase-hybrid-inverter/) is a natural match. One battery gives it 16 kWh, two give 32 kWh, and you can keep expanding from there.

## Technical data, ports, communication and compatibility

| Parameter | Value |
|---|---|
| Model | V-TAC VT-48290 |
| Manufacturer order code | 12789 |
| Type | Floor-standing low-voltage battery for solar storage and backup |
| Cell chemistry | LiFePO₄ (LFP) |
| Nominal voltage | 51.2 V |
| Rated capacity | 314 Ah |
| Nominal energy | 16.07 kWh |
| Energy at 90% depth of discharge | 14.46 kWh |
| Float charge voltage | 57.6 V |
| Discharge cut-off voltage | 43.2 V |
| Recommended charge current | 140 A |
| Max. charge / discharge current | 150 A |
| Power at 150 A | 7.68 kW (150 A × 51.2 V) |
| Cycle life | ≥ 7,000 cycles at 25 °C and 90% DoD, to 70% capacity |
| Cell configuration | 16 LFP cells in series (16S) |
| BMS | Integrated; monitors voltage, current and temperatures, protects against over-voltage, under-voltage, over-current and short circuit |
| Balancing | Cell balancing controlled by the BMS |
| Fire suppression | Built-in aerosol fire-suppression module; triggers at 175 ± 15 °C and extinguishes within 2–3 s |
| State-of-charge indicator | 6 LEDs |
| Status indication | RUN and ALM LEDs, buzzer |
| App | TBESS for Android 7.0+ and iOS 13.0+ |
| Wireless connection | Bluetooth and 2.4 GHz Wi-Fi |
| App functions | Voltage, current, SOC, SOH, cycle count, individual cell voltages, temperatures, charge and discharge statistics, alarm history, firmware updates, device sharing |
| Port J5 | RJ45, CAN to the inverter |
| Port J6 | RJ45, RS485 to the inverter |
| Port J7 | RJ45, parallel output to the next battery |
| Port J8 | RJ45, parallel input and BMS service access |
| ANT | Bluetooth antenna |
| BAT+ / BAT− | Touch-safe quick power connectors with lock |
| Main switch | ON/OFF switch on the panel |
| BMS switch | Self-locking push button |
| Grounding | Ground point, ground cable included |
| CAN pinout (RJ45) | 3 SGND · 4 CAN-H · 5 CAN-L · 6 SGND |
| RS485 pinout (RJ45) | 1 RS485-B · 2 RS485-A · 3 SGND · 6 SGND · 7 RS485-A · 8 RS485-B |
| Parallel port pinout | 1–2 RS485 · 3 SGND · 4 CAN-H · 5 CAN-L · 6 SGND · 7–8 RS485 |
| Inverter communication | CAN (J5), RS485 (J6) |
| Battery-to-battery communication | CAN and RS485 via J7/J8, automatic master/slave management |
| Compatible inverters | Deye SUN-3K / 3.6K / 5K / 6K-SG03LP1-EU; Deye SUN-3K to 12K-SG05LP3-EU-SM2; Deye SUN-14K to 20K-SG05LP3-EU-SM2 and others |
| Design | White floor-standing cabinet on four wheels, secured to the wall with two brackets |
| Dimensions (W × D × H) | 680 × 240 × 710 mm |
| Cabinet height without wheels | 640 mm |
| Protection rating | IP65 |
| Charge temperature | 0 to +55 °C |
| Discharge temperature | −20 to +60 °C |
| Working range | 0 to +60 °C |
| Storage temperature | +15 to +35 °C |
| Parallel connection | Up to 15 batteries |
| System energy | 2 units 32.14 kWh · 4 units 64.28 kWh · 15 units 241.05 kWh |
| In the box | 1× VT-48290 battery; 1× positive power cable 1.5 m; 1× negative power cable 1.5 m; 1× CAN communication cable 1.5 m; 1× ground cable; 2× SC50-8 cable lug; 2× wall bracket; 2× screw 3.8 × 30 mm; 2× screw 5 × 12 mm; 1× spirit level; manual, warranty card, packing list |
| Certification | IEC 62619:2022 (CB certificate, LCIE), CE including RED 2014/53/EU, CEI 0-21, RoHS |
| Manufacturer warranty | 10 years |

## Sixteen kilowatt-hours that arrive on wheels

The V-TAC VT-48290 is a complete storage system in one white cabinet. Inside, sixteen large 314 Ah LiFePO₄ cells deliver 51.2 V and 16.07 kWh. That is enough to carry a typical household through the evening, the night and the morning, with energy to spare for hot water or topping up the car. The cabinet is 68 cm wide, just 24 cm deep and 71 cm high, so it fits against the wall of a utility room, in a garage or under a carport. You roll it into place on its own wheels and secure it to the wall with the two brackets from the box. One cabinet replaces three common 5 kWh modules together with their links, rack and cabling, yet needs only a single pair of power cables and one data connection.

## Four ways this battery earns its keep

The first is self-consumption: during the day you store surplus solar power, and in the evening you light, cook and heat with it instead of selling it cheaply and buying it back at full price. The second is backup: when the grid fails, the inverter switches to the battery and the fridge, boiler, pump, internet and lights keep running. The third is load shifting: charge in the cheap hours and use the energy at peak time. The fourth is peak shaving, valued by workshops and businesses with large machines and a small grid connection. With 16 kWh of capacity and more than 7 kW of power, the VT-48290 handles all four jobs at once.

## IP65: a battery that does not need the living room

An IP65 rating means a dust-tight cabinet protected against water jets. You can put the battery where there is room for it rather than where it is cleanest: a garage, a workshop, a boiler room, a storeroom or a covered terrace. It delivers energy from −20 to +60 °C and charges from 0 to +55 °C, so it copes with winter mornings and midsummer heat alike. At just 24 cm deep, it is storage that takes up almost no space along a wall.

## 150 A for the inverter: power for the whole house

The battery delivers up to 150 A continuously. At its nominal 51.2 V that is 7.68 kW from a single cabinet, enough to run a hob, a washing machine, a pump and everyday household loads together. The inverter can charge it at the same current, and the manufacturer recommends 140 A. A full charge from the sun or a cheap tariff therefore takes roughly two hours, and the battery is ready for the next peak.

## 7,000 cycles: storage for decades

The manufacturer states at least 7,000 cycles at 25 °C and 90% depth of discharge. At one cycle a day that works out at more than 19 years of service. Each such cycle delivers 14.46 kWh, so over its life the battery turns over more than 100 MWh of energy. LiFePO₄ chemistry is built for this: it is stable, handles high currents and has no memory effect, so you can charge and discharge according to sun and demand, whatever the previous state. The manufacturer backs the battery with a ten-year warranty.

## A fire-suppression module built into the cabinet

The VT-48290 has something you rarely find in a home battery: its own aerosol fire-suppression module. It watches the temperature inside the cabinet, triggers by itself at 175 ± 15 °C and acts right at the cells within two to three seconds. Alongside it, the BMS continuously measures voltage, current and temperatures, balances the cells and protects the pack against over-voltage, under-voltage, over-current and short circuit. The battery's safety is confirmed by an IEC 62619:2022 certificate issued under the international CB scheme.

## The battery in your phone: the TBESS app

The battery has Bluetooth and Wi-Fi built in and is managed from the TBESS app for Android and iOS. Up close you connect over Bluetooth, from anywhere else over your home Wi-Fi. You see state of charge, voltage, current, temperatures, cycle count and the voltage of each of the sixteen cells. The app shows daily, monthly and yearly statistics of energy charged and discharged, keeps a history of alerts and updates the firmware with one tap. You can share access with your family or with a service technician.

## CAN and RS485 for Deye inverters and others

The battery communicates with the inverter over CAN or RS485, and each interface has its own RJ45 port. The manufacturer lists the VT-48290 in joint CEI 0-21 certificates with Deye hybrid inverters: the single-phase SUN-3K to 6K-SG03LP1-EU and the three-phase SUN-3K to 20K-SG05LP3-EU-SM2. You will find the three-phase [Deye SUN-10K-SG05LP3-EU-SM2](https://batterado.com/en/product/deye-sun-10k-sg05lp3-eu-sm2-10-kw-three-phase-hybrid-inverter/) right here in our shop. The inverter reads the battery status over the data link and manages charging and discharging itself; you simply plug in the cable supplied in the box.

## From 16 to 241 kWh

One cabinet is the starting point. You can connect up to 15 batteries in parallel, for 241 kWh. Two batteries give 32 kWh for a larger house with a heat pump, four give 64 kWh for a guesthouse or a workshop, and a full bank serves a business or a farm. The batteries coordinate through ports J7 and J8 and behave as a single storage system. You can expand step by step as your solar array and your consumption grow. The parallel ports carry CAN and RS485 together, so one network cable between neighbouring cabinets links the batteries, and the inverter needs only a single data connection to the first one.

## Maintenance-free operation, status at a glance

The battery runs without maintenance: nothing to top up, replace or adjust. Six LEDs on the panel show the state of charge, the RUN light shows operation and the ALM light with a buzzer signals any alert, so you can read the status without your phone. Every connection sits on one panel: power connectors, the main switch, four RJ45 data ports, the antenna and the ground point. Installation is quick, and the wiring stays tidy for years.

## Everything you need in the box

The box contains 1.5 m power cables for the positive and negative poles with touch-safe quick connectors, a CAN communication cable, a ground cable, cable lugs, wall brackets with fixings and even a spirit level. The power connectors click in and lock, with no terminals to screw down. From our page you can download the manual, the technical data sheet, the certificates and a product overview in Markdown.

## Photos and drawings

- [V-TAC VT-48290 16.07 kWh, front view of the white cabinet on wheels](https://batterado.com/wp-content/uploads/2026/11/v-tac-vt-48290-front.jpg)
- [V-TAC VT-48290, rear view with the top connector panel](https://batterado.com/wp-content/uploads/2026/11/v-tac-vt-48290-rear-connectors.jpg)
- [V-TAC VT-48290, view of the battery cabinet](https://batterado.com/wp-content/uploads/2026/11/v-tac-vt-48290-view-3.jpg)
- [V-TAC VT-48290, side view with handle and rating label](https://batterado.com/wp-content/uploads/2026/11/v-tac-vt-48290-side-handle.jpg)
- [V-TAC VT-48290, cabinet detail](https://batterado.com/wp-content/uploads/2026/11/v-tac-vt-48290-view-5.jpg)
- [V-TAC VT-48290, dimension drawing 680 × 240 × 710 mm](https://batterado.com/wp-content/uploads/2026/11/v-tac-vt-48290-dimensions.png)
- [V-TAC VT-48290, drawing of the panel with BAT+, BAT−, RJ45 ports and switch](https://batterado.com/wp-content/uploads/2026/11/v-tac-vt-48290-connection-panel.png)

## Downloads

- [VT-48290 instruction manual (EN, PDF)](https://batterado.com/wp-content/uploads/2026/11/vtac-vt-48290/v-tac-vt-48290-manual-en.pdf)
- [VT-48290 technical specifications (EN, PDF)](https://batterado.com/wp-content/uploads/2026/11/vtac-vt-48290/v-tac-vt-48290-technical-specifications-en.pdf)
- [IEC 62619:2022 certificate (PDF)](https://batterado.com/wp-content/uploads/2026/11/vtac-vt-48290/v-tac-vt-48290-iec-62619-cb-certificate.pdf)
- [CE / RED certificate (PDF)](https://batterado.com/wp-content/uploads/2026/11/vtac-vt-48290/v-tac-vt-48290-ce-red-certificate.pdf)
- [Declaration of conformity (PDF)](https://batterado.com/wp-content/uploads/2026/11/vtac-vt-48290/v-tac-vt-48290-declaration-of-conformity.pdf)
- [CEI 0-21 with Deye SUN-3K to 6K-SG03LP1-EU (IT/EN, PDF)](https://batterado.com/wp-content/uploads/2026/11/vtac-vt-48290/v-tac-vt-48290-cei-0-21-deye-sg03lp1-3-6k.pdf)
- [CEI 0-21 with Deye SUN-3K to 12K-SG05LP3-EU-SM2 (IT/EN, PDF)](https://batterado.com/wp-content/uploads/2026/11/vtac-vt-48290/v-tac-vt-48290-cei-0-21-deye-sg05lp3-3-12k.pdf)
- [CEI 0-21 with Deye SUN-14K to 20K-SG05LP3-EU-SM2 (IT/EN, PDF)](https://batterado.com/wp-content/uploads/2026/11/vtac-vt-48290/v-tac-vt-48290-cei-0-21-deye-sg05lp3-14-20k.pdf)

## AI search description

The V-TAC VT-48290 (order code 12789) is a stand-alone, floor-standing low-voltage LiFePO₄ battery for solar systems and backup power. It is a complete battery with a built-in BMS in one cabinet; the inverter is connected separately. Nominal voltage is 51.2 V, capacity 314 Ah and nominal energy 16.07 kWh, or 14.46 kWh at 90% depth of discharge. The pack consists of 16 LFP cells in series.

Recommended charge current is 140 A and maximum charge and discharge current is 150 A, which at 51.2 V corresponds to 7.68 kW on the DC side. Float charge voltage is 57.6 V and discharge cut-off voltage 43.2 V. The manufacturer states at least 7,000 cycles at 25 °C and 90% DoD to 70% capacity, and a 10-year warranty.

The battery is rated IP65, measures 680 × 240 × 710 mm and has four wheels and brackets for securing it to a wall. It charges at 0 to +55 °C, discharges at −20 to +60 °C and is stored at +15 to +35 °C. The cabinet contains a built-in aerosol fire-suppression module that triggers at 175 ± 15 °C.

Inverter communication runs over CAN (port J5) or RS485 (port J6); parallel linking uses J7 and J8. Compatible inverters according to the manufacturer's certificates: Deye SUN-3K to 6K-SG03LP1-EU, SUN-3K to 12K-SG05LP3-EU-SM2, SUN-14K to 20K-SG05LP3-EU-SM2 and others. Monitoring is provided by the TBESS app over Bluetooth and 2.4 GHz Wi-Fi, including individual cell voltages, statistics and firmware updates. Up to 15 batteries can be connected in parallel, for 241.05 kWh.

The box contains the battery, 1.5 m power cables for both poles, a 1.5 m CAN communication cable, a ground cable, SC50-8 cable lugs, two wall brackets with fixings, a spirit level and documentation. Certification: IEC 62619:2022, CE including RED, CEI 0-21, RoHS.

[Batterado — V-TAC VT-48290](https://batterado.com/en/product/v-tac-vt-48290-16-07-kwh-lifepo4-battery-ip65/)

Related: [Deye SUN-10K-SG05LP3-EU-SM2](https://batterado.com/en/product/deye-sun-10k-sg05lp3-eu-sm2-10-kw-three-phase-hybrid-inverter/)
