# KONJA KJ-BESS-210-418L — 210 kW / 418 kWh outdoor battery storage cabinet, liquid-cooled

- Manufacturer: KONJA
- Order code: KJ-BESS-210-418L
- Product page: https://batterado.com/en/product/konja-kj-bess-210-418l-210-kw-418-kwh-battery-storage/
- Updated: 2026-11-10

**418 kWh and 210 kW in one outdoor cabinet that arrives ready to work.** The KONJA KJ-BESS-210-418L combines battery, converter, control, liquid cooling and fire suppression in a single IP55 unit, so all you need is a foundation, a cable and a connection. It earns its keep through peak shaving, storing solar surplus and dynamic tariffs, and keeps operations running through an outage.

- 418 kWh nominal, 376 kWh at 90% depth of discharge
- 210 kW continuous, 231 kW maximum
- 416 LiFePO₄ 314 Ah cells in a 1P416S configuration
- at least 8,000 cycles to 70% capacity, 15-year design life
- liquid-cooled battery with heating, operation from −20 to +50 °C
- aerosol fire suppression at module and cabinet level
- EMS with Modbus TCP/RTU, MQTT and HTTP, app and local web
- 800 V AC output for direct connection to a compatible PV inverter
- IP55, footprint of only 1.5 × 1.64 m

## Choose the size of your storage

The KJ-BESS-210-418L has an 800 V AC interface for direct connection to a compatible PV inverter with an 800 V AC output. For direct 400 V connection and off-grid operation there is the smaller [KONJA KJ-BESS-125-261L](https://batterado.com/en/product/konja-kj-bess-125-261l-125-kw-261-kwh-battery-storage/).

## Technical data: battery, converter, control, cooling and fire suppression

| Parameter | Value |
|---|---|
| Model | KONJA KJ-BESS-210-418L |
| Type | Complete outdoor battery energy storage system (battery, BMS, PCS, EMS, cooling, fire suppression) |
| Nominal energy | 418 kWh (417.9968 kWh) |
| Energy at 90% depth of discharge | 376 kWh |
| Nominal power | 210 kW, maximum 231 kW |
| PCS overload capability | 110% continuous |
| Cells | LiFePO₄ 3.2 V / 314 Ah, 1,004.8 Wh |
| Number of cells | 416 |
| Battery packs | 8 packs 1P52S, each 166.4 V / 52.25 kWh, 330 kg |
| Battery configuration | 1P416S |
| Nominal battery voltage | 1,331.2 V |
| Battery voltage range | 1 150–1 500 V |
| Rated DC current | 155 A |
| Charge / discharge rate | 0.5 C |
| Depth of discharge | 90% |
| Cycle life | ≥ 8,000 cycles to 70% capacity |
| Design life | 15 years |
| BMS | Two-tier BMU and BCU architecture; CAN to modules and PCS, RS485 to EMS |
| High-voltage box | Circuit breakers, fuses, contactors, current sensors and BCU control unit |
| PCS rated power | 215 kW |
| Rated AC voltage | 800 V (−15% to +10%) |
| Rated AC current | 155 A |
| Grid connection | Three-phase three-wire |
| Grid frequency | 50 / 60 Hz ± 2.5 Hz |
| Power factor | −1 to +1 |
| THDi | ≤ 3% at full load |
| DC component | ≤ 0.5% |
| PCS maximum DC current | 245 A |
| THDu | ≤ 3% with linear load |
| Unbalanced load capability | 100% |
| PCS efficiency | up to 99% |
| System efficiency | ≥ 87% at 0.5 P and 25 °C |
| EMS | Local controller: quad-core CPU, 4 GB RAM, 16 GB storage |
| EMS interfaces | 2× Ethernet, 4× RS-485, 2× CAN, 8× DI, 8× DO, 4G, USB, SD |
| Communication protocols | Modbus TCP, Modbus RTU, MQTT, HTTP |
| Control and monitoring | Touch display in the cabinet, mobile app, local web, cloud EMS platform |
| Battery cooling | Liquid, 8.0 kW cooling capacity, 2.0 kW heating, 50 l/min flow |
| PCS cooling | Smart air cooling |
| Dehumidification | Dehumidifier on the battery side |
| Module-level fire suppression | Aerosol with thermal activation at 185 ± 10 °C, discharge time ≤ 15 s |
| Cabinet-level fire suppression | Aerosol with smoke and temperature detectors, electrical activation |
| Further safety features | Pressure relief valve, emergency stop, AC surge protection, audible and visual alarm |
| Operating temperature | −20 to +50 °C |
| Ambient humidity | 0–95%, non-condensing |
| Altitude | 3,000 m |
| Ingress protection | IP55 |
| Anti-corrosion grade | C3 |
| Dimensions (W × H × D) | 1,500 × 2,360 × 1,640 mm |
| Weight | 3,600 kg |
| Shipping package | crate 170 × 184 × 261 cm, 8.16 m³ |
| Scope of delivery | 1× KJ-BESS-210-418L cabinet fitted with battery packs, high-voltage box, 215 kW PCS, EMS, liquid cooling unit, fire suppression system, power meter and distribution compartment |
| Certification | IEC 62619, IEC 62477, IEC 61000, UN 38.3 |
| Manufacturer warranty | 5 years on battery and PCS |

## 418 kWh that arrive ready to work

The KONJA KJ-BESS-210-418L is a complete battery energy storage system in one outdoor cabinet. Inside are 416 LiFePO₄ cells of 314 Ah in eight packs, a high-voltage box, a bidirectional 215 kW PCS converter, an EMS controller, a liquid cooling unit and a fire suppression system. Everything is wired, commissioned and tested at the factory. On site you prepare a foundation, bring in the power cable and a data connection, and the storage goes to work. There is no container to assemble from several suppliers' parts and no communication to debug between them.

## Where the storage earns money

The manufacturer designed the cabinet for peak shaving and valley filling, storing renewable energy, dynamic electricity pricing, ancillary services and backup power. In practice that means lower charges for reserved capacity and quarter-hour peaks, more of your own solar power from the hall roof, and buying energy in cheap hours to use at peak time. With 210 kW of power and 418 kWh of energy it covers a larger production plant, a logistics park, a solar power plant or a fast-charging hub. At one full cycle a day it shifts about 137 MWh of energy a year from cheap hours to expensive ones, and twice that at two cycles. The same storage handles several jobs at once: storing sunshine by day, shaving the peak in the evening and standing by as backup at night.

## 210 kW of power with headroom

The storage delivers 210 kW rated and up to 231 kW for short periods. Inside is a modular 215 kW PCS converter with 110% continuous overload capability and efficiency of up to 99%. The DC side works at 1,150 to 1,500 V, which means small currents, thinner cables and low losses. AC current is 155 A. The full capacity charges or discharges in roughly two hours, and system efficiency is at least 87%.

## 314 Ah cells and 8,000 cycles

The battery consists of 416 LiFePO₄ 3.2 V / 314 Ah cells connected in series as 1P416S, with a nominal voltage of 1,331.2 V. Each cell holds 1,004.8 Wh of energy. The manufacturer states at least 8,000 cycles at 90% depth of discharge to 70% capacity and a 15-year design life. At one cycle a day that is more than twenty years of service; at two cycles a day, still more than ten. The packs have a die-cast case with cooling channels moulded into the casting, making them light and rigid and keeping the coolant where it belongs. The cells are managed by a two-tier BMS: BMU units in the packs and a BCU controller in the high-voltage box.

## Liquid cooling for steady performance

The battery is cooled and heated by a liquid circuit with a unit of 8 kW cooling capacity and 2 kW heating capacity. The liquid draws heat evenly from all cells, so they age at the same rate and the storage holds its output in summer and winter. The cabinet operates from −20 to +50 °C, and thanks to heating it is ready even after a frosty night. A dehumidifier watches over the battery compartment. The PCS converter has its own smart air cooling.

## Two-level fire suppression and layered protection

Safety is built in layers. Each pack has its own aerosol suppression element that is triggered by heat at 185 °C and acts right at the source. The second level protects the whole cabinet: smoke and temperature detectors raise the alarm and electrically trigger aerosol suppression. A pressure relief valve, an emergency stop, surge protection and audible and visual alarms complete the system. It is certified to IEC 62619, IEC 62477, IEC 61000 and UN 38.3.

## EMS: control that thinks for you

The EMS controller is a dedicated industrial computer inside the cabinet. It links the BMS, converter, power meter, cooling and fire suppression, analyses the data and runs the charge and discharge strategy by itself. It speaks Modbus TCP, Modbus RTU, MQTT and HTTP, so you can connect it to a building management system, a solar plant, a control room or a flexibility trader. It has two Ethernet ports, four RS-485, two CAN, eight digital inputs and outputs and a 4G modem. You operate the storage from the touch display, the mobile app, the local web interface or the cloud platform.

## A clear distribution compartment and quick service

Behind the cabinet door everything is within reach. The distribution compartment groups the battery DC breaker, the grid connection breaker, surge protection, the power meter, the auxiliary supply switches and the BMS service interface. A touch display shows the state of the whole system on the spot. Power, run and alarm indicators and an emergency stop sit on the door, so staff can read the status at a glance without logging in. The battery packs are individually removable units, which simplifies service throughout the system's life.

## Connecting a PV inverter at 800 V AC

The AC output is 800 V in a three-phase three-wire arrangement. A compatible PV inverter with an 800 V AC output can connect directly. For a 400 V AC installation, the project design determines the required voltage adaptation. The storage controls the power factor across the full −1 to +1 range, keeps current harmonic distortion within 3% and handles 100% unbalanced load. It suits ancillary services, backup power and off-grid applications.

## IP55 and a footprint of 1.5 × 1.64 m

The cabinet is rated IP55 with anti-corrosion grade C3, so it stands outdoors without a shelter. At 1,500 × 2,360 × 1,640 mm it occupies 1.5 × 1.64 m and weighs 3,600 kg. It fits next to a transformer station, beside a hall or in a car park. All connections and breakers are grouped in the distribution compartment behind the door.

## In factory stock, delivered to site

The cabinets are in stock at the manufacturer and ship once ordered. We deliver them to your site in the Czech Republic in a shipping crate on a pallet (crate 170 × 184 × 261 cm, 8.16 m³). The manufacturer provides a 5-year warranty on both battery and converter. If you need a different size, take a look at the [KONJA KJ-BESS-125-261L](https://batterado.com/en/product/konja-kj-bess-125-261l-125-kw-261-kwh-battery-storage/).

## Photos and drawings

- [KONJA KJ-BESS-210-418L, 210 kW / 418 kWh outdoor battery storage cabinet](https://batterado.com/wp-content/uploads/2026/11/konja-kj-bess-210-418l-cabinet.jpg)
- [KONJA KJ-BESS-210-418L, front view with status indicators and emergency stop](https://batterado.com/wp-content/uploads/2026/11/konja-kj-bess-210-418l-front-view.png)
- [KONJA KJ-BESS-210-418L, cabinet layout with open doors: cooling, eight packs, PCS, high-voltage box, EMS](https://batterado.com/wp-content/uploads/2026/11/konja-kj-bess-210-418l-open-door-layout.png)

## Downloads

- [KJ-BESS-210-418L product specification V1.1 (EN, PDF)](https://batterado.com/wp-content/uploads/2026/11/konja-kj-bess-210-418l/konja-kj-bess-210-418l-product-specification-v1-1-en.pdf)
- [KJ-BESS-210-418L data sheet (EN, PDF)](https://batterado.com/wp-content/uploads/2026/11/konja-kj-bess-210-418l/konja-kj-bess-210-418l-datasheet-en.pdf)

## AI search description

The KONJA KJ-BESS-210-418L is a complete outdoor battery energy storage system (BESS) for business and industry. One cabinet contains the LiFePO₄ battery, BMS, a bidirectional PCS converter, an EMS controller, liquid cooling and an aerosol fire suppression system; it is not a stand-alone battery without a converter. Nominal energy is 418 kWh (417.9968 kWh) and nominal power 210 kW, maximum 231 kW.

Battery: 416 cells of 3.2 V / 314 Ah in a 1P416S configuration, 8 packs 1P52S, each 166.4 V / 52.25 kWh, 330 kg, nominal voltage 1,331.2 V, range 1 150–1 500 V, rated DC current 155 A, 0.5 C, 90% depth of discharge, at least 8,000 cycles to 70% capacity, 15-year design life.

AC side: 215 kW PCS, 110% continuous, voltage 800 V (−15% to +10%), current 155 A, connection Three-phase three-wire, 50/60 Hz, power factor −1 to +1, THDi up to 3%. Direct connection to a compatible PV inverter with an 800 V AC output. PCS maximum DC current 245 A, PCS efficiency up to 99%, system efficiency at least 87%, 100% unbalanced load.

Control and communication: EMS with Modbus TCP, Modbus RTU, MQTT and HTTP, interfaces 2× Ethernet, 4× RS-485, 2× CAN, 8× DI, 8× DO and 4G; operation from the display, mobile app, local web and cloud. Liquid battery cooling (Liquid, 8.0 kW cooling capacity, 2.0 kW heating, 50 l/min flow), air-cooled PCS. Aerosol fire suppression at pack and cabinet level, pressure relief valve, emergency stop.

IP55 rating, anti-corrosion grade C3, operating temperature −20 to +50 °C, humidity 0–95%, altitude up to 3,000 m. Dimensions 1,500 × 2,360 × 1,640 mm, weight 3,600 kg. Certification IEC 62619, IEC 62477, IEC 61000, UN 38.3. Manufacturer warranty 5 years on battery and PCS. Applications: peak shaving, solar energy storage, dynamic tariffs, ancillary services, backup power.

[Batterado — KONJA KJ-BESS-210-418L](https://batterado.com/en/product/konja-kj-bess-210-418l-210-kw-418-kwh-battery-storage/)

Related: [KONJA KJ-BESS-125-261L](https://batterado.com/en/product/konja-kj-bess-125-261l-125-kw-261-kwh-battery-storage/)
