# Deye SUN-10K-SG05LP3-EU-SM2 — 10 kW three-phase hybrid inverter for 48 V batteries

- Manufacturer: Deye
- Order code: SUN-10K-SG05LP3-EU-SM2
- Product page: https://batterado.com/en/product/deye-sun-10k-sg05lp3-eu-sm2-10-kw-three-phase-hybrid-inverter/
- Updated: 2026-11-10

**Ten kilowatts across three phases, a large 48 V battery and full home backup in one IP65 enclosure.** The Deye SUN-10K-SG05LP3-EU-SM2 manages solar, battery, grid and generator and keeps the house running through an outage. Each phase can carry up to half the rated power, so you do not have to watch what is plugged in where.

- 10 kW rated, 11 kVA, 20 kW peak for 10 s
- up to 20 kW of PV on two MPPTs, 2 + 2 strings
- battery charging and discharging at up to 210 A
- 100% unbalanced load, up to 5 kW per phase
- up to 10 inverters in parallel, on-grid and off-grid
- AC coupling to retrofit an existing solar system
- 6 time windows for charging and discharging
- diesel generator support
- CAN, RS485 and RS232 for the battery, IP65, 35.2 kg

## Choose a battery and accessories

The inverter works with 48 V batteries in the 40–60 V range and talks to a lithium battery over CAN or RS485. From our range, the floor-standing [V-TAC VT-48290 16,07 kWh](https://batterado.com/en/product/v-tac-vt-48290-16-07-kwh-lifepo4-battery-ip65/) is a match: its manufacturer lists it with this inverter series in a joint CEI 0-21 certificate. The [Deye SUN-SMART-TX01](https://batterado.com/en/product/deye-sun-smart-tx01-lora-transmitter/) transmitter and the [Deye SUN-EVSE22K01-EU-AC](https://batterado.com/en/product/deye-sun-evse22k01-eu-ac-22-kw-ev-charger/) charger add wireless load control and car charging.

## Technical data: battery, PV, AC side and communication

| Parameter | Value |
|---|---|
| Model | Deye SUN-10K-SG05LP3-EU-SM2 |
| Type | Three-phase hybrid inverter for low-voltage batteries |
| Rated AC power | 10,000 W |
| Max. AC apparent power | 11,000 VA |
| Off-grid peak power | 2× rated power for 10 s (20 kW) |
| Rated AC current | 15.2 / 14.5 A |
| Max. AC current | 16.7 / 16 A |
| Max. continuous AC passthrough (grid to load) | 45 A |
| Grid connection | 3L + N + PE |
| Grid voltage | 220/380 V, 230/400 V; 0.85–1.1 Un |
| Grid frequency | 50 Hz (45–55 Hz), 60 Hz (55–65 Hz) |
| Power factor range | 0.8 leading to 0.8 lagging |
| Unbalanced output | 100%, up to 50% of rated power per phase |
| THDi | < 3% (at nominal power) |
| DC injection current | < 0.5% In |
| Battery type | Lithium-ion or lead-acid |
| Battery voltage range | 40–60 V |
| Max. charging current | 210 A |
| Max. discharging current | 210 A |
| Charging strategy for Li-ion | Self-adaption to BMS |
| Number of battery inputs | 1 |
| Max. PV access power | 20,000 W |
| Max. PV input power | 16,000 W |
| Max. PV input voltage | 800 V |
| Start-up voltage | 160 V |
| MPPT voltage range | 200–650 V |
| Rated PV input voltage | 550 V |
| Max. operating PV input current | 26 + 26 A |
| Max. input short-circuit current | 39 + 39 A |
| MPP trackers / strings per tracker | 2 / 2 + 2 |
| Max. efficiency | 97.6% |
| Euro efficiency | 97.0% |
| MPPT efficiency | > 99% |
| Parallel operation | Up to 10 inverters on-grid and off-grid; multiple batteries in parallel |
| AC coupling | Retrofit of an existing solar system |
| Battery time control | 6 time periods for charging and discharging |
| Generator | Stores energy from a diesel generator |
| Battery-side isolation | Transformer isolation of the 48 V battery |
| Communication interface | RS485 / RS232 / CAN |
| Monitoring | GPRS / Wi-Fi / Bluetooth / 4G / LAN (optional) |
| Compatible batteries | V-TAC VT-48290 16.07 kWh and other lithium and lead-acid batteries, 40–60 V |
| Integrated protection | DC reverse polarity, AC output over-current, over-voltage and short circuit, thermal protection, DC component monitoring, anti-islanding, DC switch, insulation impedance detection, residual current detection; AFCI optional |
| Surge protection | Type II (DC), Type II (AC) |
| Over-voltage category | OVC II (DC), OVC III (AC) |
| Operating temperature | −40 to +60 °C, full power up to 45 °C |
| Ambient humidity | 0–100% |
| Altitude | 3,000 m |
| Noise | ≤ 55 dB |
| Ingress protection | IP65 |
| Cooling | Intelligent air cooling |
| Dimensions (W × H × D) | 386 × 660 × 250 mm excluding connectors and brackets |
| Weight | 35.2 kg |
| Grid regulation | IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G98, G99, VDE-AR-N 4105 |
| Safety / EMC | IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2 |

## One enclosure runs solar, battery, grid and backup

The Deye SUN-10K-SG05LP3-EU-SM2 is the heart of a home or business solar system. One enclosure combines two MPPT trackers for the PV array, a charger and inverter for a 48 V battery, a three-phase grid connection and a backed-up output for your loads. It delivers 10 kW and 11 kVA rated, enough for a family house with a heat pump, a guesthouse, a workshop or a small business. It manages everything itself according to the sun, the battery state and your settings.

## Up to 20 kW of PV on two MPPTs

You can connect a PV array of up to 20 kW, of which the inverter processes up to 16 kW. Two independent MPPT trackers, each with two strings, let you fit two differently oriented roofs, east and west for example, and harvest the maximum from both. An MPPT range of 200–650 V, start-up from 160 V and an input of up to 800 V give great freedom in string design. Each tracker handles 26 A, so it copes with today's high-power panels. MPPT efficiency above 99% and a maximum efficiency of 97.6% mean the energy from the roof ends up in your appliances and your battery.

## 210 A to the battery: full power from storage too

The inverter charges and discharges a 48 V battery at up to 210 A. That is around 10 kW, so the house runs at full power at night as well, and a 16 kWh battery refills from the sun in under two hours. It works with lithium and lead-acid batteries in the 40–60 V range. With a lithium battery it exchanges data over CAN or RS485 and adapts charging to the instructions of its BMS. The battery side is isolated from the grid by a transformer. Several batteries can be connected in parallel to one inverter; from our range, the [V-TAC VT-48290 16,07 kWh](https://batterado.com/en/product/v-tac-vt-48290-16-07-kwh-lifepo4-battery-ip65/) is a good match.

## Backup that handles start-up surges

When the grid fails, the inverter switches to its backed-up output and the house keeps running from battery and sun. Off-grid it briefly delivers twice its rated power, 20 kW for 10 seconds. That is the reserve for starting a pump, a compressor or a workshop machine. It passes up to 45 A continuously from grid to load, so the whole house can be supplied through it.

## 100% unbalanced load: up to 5 kW on each phase

In a real house the load is never evenly spread across the phases. This inverter takes that in its stride: it supports 100% unbalanced load and supplies up to half its rated power, 5 kW, on each phase. A hob on one phase, a water heater on the second and car charging on the third are no problem. Installation is simpler, and the household does not have to think about which appliance belongs where.

## From one inverter to 100 kW

Up to ten inverters can run in parallel, on-grid and off-grid, to build a 100 kW system. You start with one unit and add more as consumption or the business grows. Thanks to AC coupling, the inverter also connects to an existing solar system, adding a battery and backup without replacing the original equipment. Diesel generator support lets you store generator energy in the battery, which cabins, farms and sites with a weak grid connection will appreciate.

## Six time windows for cheap energy

Battery charging and discharging can be scheduled in six time windows. You charge in the cheap hours, discharge at peak time and send solar surplus where it is worth most. The inverter is monitored and configured remotely: over Wi-Fi, Bluetooth, LAN, GPRS or 4G, depending on the module you choose. A colour display on the front shows the energy flows at a glance.

## IP65 and a −40 to +60 °C range

The IP65 enclosure belongs on the wall of a utility room or garage, or on an outside wall under a canopy. The inverter operates from −40 to +60 °C and delivers full power up to 45 °C, with intelligent air cooling and noise of no more than 55 dB. At 386 × 660 × 250 mm and 35.2 kg, two people can mount it without lifting gear. Built-in Type II surge protection on both the DC and AC sides and a DC switch are part of the unit.

## Expansion: wireless control and car charging

Add the [Deye SUN-SMART-TX01](https://batterado.com/en/product/deye-sun-smart-tx01-lora-transmitter/) transmitter and the inverter links wirelessly over LoRa to up to ten smart switches and plugs, two current sensors and one EV charger. The [Deye SUN-EVSE22K01-EU-AC](https://batterado.com/en/product/deye-sun-evse22k01-eu-ac-22-kw-ev-charger/) charger can then charge the car from solar surplus only, or according to the battery state. The inverter becomes the energy control centre of the whole house.

## Standards for grid connection in Europe

The inverter meets the grid codes EN 50549, VDE-AR-N 4105, CEI 0-21, G98/G99 and the others listed in the technical overview, and the safety standards IEC/EN 62109-1 and -2. On our page you can download the manufacturer's data sheet, the CEI 0-21 certificate for this series and a product overview in Markdown.

## Photos and drawings

- [Deye SUN-10K-SG05LP3-EU-SM2, 10 kW three-phase hybrid inverter with display](https://batterado.com/wp-content/uploads/2026/11/deye-sun-10k-sg05lp3-eu-sm2-front.png)

## Downloads

- [Deye SUN-3–12K-SG05LP3-EU-SM2 data sheet (EN, PDF)](https://batterado.com/wp-content/uploads/2026/11/deye-sun-10k-sg05lp3-eu-sm2/deye-sun-sg05lp3-eu-sm2-datasheet-en.pdf)
- [CEI 0-21 declaration for SUN-3K to 12K-SG05LP3-EU-SM2 (IT/EN, PDF)](https://batterado.com/wp-content/uploads/2026/11/deye-sun-10k-sg05lp3-eu-sm2/deye-sun-sg05lp3-eu-sm2-cei-0-21.pdf)

## AI search description

The Deye SUN-10K-SG05LP3-EU-SM2 is a three-phase hybrid inverter for solar systems and 48 V low-voltage batteries. It is a stand-alone inverter; the battery and PV panels are connected separately. Rated AC power is 10,000 W, maximum apparent power 11,000 VA, and off-grid peak power twice the rated power for 10 s. Connection 3L + N + PE, 230/400 V, 50/60 Hz, continuous grid-to-load passthrough 45 A.

Battery side: lithium or lead-acid batteries, 40–60 V, maximum charge and discharge current 210 A, one battery input, lithium charging adapted to the BMS, communication over RS485 / RS232 / CAN. Compatible batteries from the Batterado range: V-TAC VT-48290 16.07 kWh and others.

PV side: array power up to 20,000 W, maximum input power 16,000 W, maximum voltage 800 V, start-up from 160 V, MPPT range 200–650 V, rated voltage 550 V, 2 MPPT trackers with 2 + 2 strings, operating current 26 + 26 A, short-circuit current 39 + 39 A. Maximum efficiency 97.6%, Euro efficiency 97.0%, MPPT efficiency above 99%.

Functions: 100% unbalanced load with up to 50% of rated power per phase, up to 10 inverters in parallel on-grid and off-grid, AC coupling for existing systems, 6 time windows for charging and discharging, storage of diesel generator energy. Optional monitoring over GPRS, Wi-Fi, Bluetooth, 4G or LAN.

IP65 rating, operating temperature −40 to +60 °C with full power up to 45 °C, noise up to 55 dB, intelligent air cooling, dimensions 386 × 660 × 250 mm, weight 35.2 kg. Type II surge protection on both the DC and AC sides. Standards: EN 50549, VDE-AR-N 4105, CEI 0-21, G98, G99, IEC 61727, IEC 62116, IEC/EN 62109-1 and -2, IEC/EN 61000-6-1/2/3/4.

[Batterado — Deye SUN-10K-SG05LP3-EU-SM2](https://batterado.com/en/product/deye-sun-10k-sg05lp3-eu-sm2-10-kw-three-phase-hybrid-inverter/)

Related: [V-TAC VT-48290 16,07 kWh](https://batterado.com/en/product/v-tac-vt-48290-16-07-kwh-lifepo4-battery-ip65/)

Related: [Deye SUN-SMART-TX01](https://batterado.com/en/product/deye-sun-smart-tx01-lora-transmitter/)

Related: [Deye SUN-EVSE22K01-EU-AC](https://batterado.com/en/product/deye-sun-evse22k01-eu-ac-22-kw-ev-charger/)
