# Huawei SUN2000-5K-MAP0 — 5 kW asymmetric three-phase hybrid inverter

SKU: HUAWEI-SUN2000-5K-MAP0

Batterado: https://batterado.com/product/huawei-sun2000-5k-map0-asymetricky-hybridni-stridac/

Huawei SUN2000-5K-MAP0 is an asymmetric three-phase hybrid inverter rated at 5 kW, with two MPPTs and an interface for complete LUNA2000 storage. It supports different loads on individual phases within total-output and phase-current limits. With a compatible battery and SmartGuard-63A-T0, it forms an engineered three-phase backup system. Optimizers can be selected according to the actual array design.

## Technical specifications

| Parameter | Value |
|---|---|
| Manufacturer | Huawei |
| Model | SUN2000-5K-MAP0 |
| Type and role | Three-phase hybrid PV inverter for external high-voltage storage |
| Rated AC output | 5 kW |
| Maximum apparent AC output | 5500 VA |
| Grid voltage | 220/380 V /230/400 V /240/415 V /3L+N+PE |
| Grid frequency | 50 /60 Hz |
| Maximum AC current | 8.3 A /380 V |
| Power factor | 0.8 leading…0.8 lagging |
| THD at rated output | ≤3 % |
| Recommended maximum PV power | 9000 Wp |
| Maximum DC voltage | 1100 V |
| Start-up voltage | 160 V |
| MPPT range | 160–1000 V |
| Rated DC voltage | 600 V |
| MPPT count | 2 |
| Strings per MPPT | 1 |
| PV string count | 2 |
| Current per MPPT | 16 A |
| Short-circuit current per MPPT | 22 A |
| Maximum efficiency | 98.4 % |
| European efficiency | 97.5 % |
| Battery interface — manual voltage range | 600–980 V DC |
| Maximum battery current | 20 A |
| Maximum battery charging power | 12 kW |
| Maximum discharge power per specification | 5500 W |
| Rated three-phase backup output | 5000 W /3-phase |
| Ingress protection | IP66 |
| Operating temperature | −25…+60 °C |
| Operating relative humidity | 0–100 % |
| Operating altitude | 0–4000 m |
| Weight including bracket | ≤21 kg |
| Dimensions W × H × D including bracket | 490 ×460 ×130 mm |
| Standard communication | RS485; local WLAN for commissioning |
| Built-in WLAN | 802.11b/g/n /2400–2483.5 MHz |
| Reference AC protection | 16 A /≥415 V AC /3-phase |
| DC conductors | 4–6 mm² Cu |
| Battery conductors | 4–6 mm² Cu |
| AC conductors | 4–6 mm² Cu |
| PE conductor | 4–6 mm² Cu |
| Grid systems | TN-S /TN-C /TN-C-S /TT /IT |
| Safety standards | EN/IEC62109-1 /EN/IEC62109-2 |
| Cooling | Natural convection |
| Topology | Transformerless |
| Local control | LED /WLAN /FusionSolar App for configuration |
| Supported battery systems | LUNA2000-5/10/15-S0 /LUNA2000-7/14/21-S1 |
| Battery assembly | Compatible modules with matching power and control module |
| Storage capacity | Defined by the selected complete battery in kWh |
| Battery charging from grid | Supported with appropriate configuration |
| Backup system pairing | LUNA2000 +SmartGuard-63A-T0 |
| Ethernet connection | With a separate WLAN-FE Smart Dongle |
| Mobile data connection | Optional compatible 4G Smart Dongle |
| Energy metering | DTSU666-H /YDS60-C24 /DTSU71 /DHSU1079-CT according to firmware and design |
| Additional control | SmartAssistant /SmartGuard-63A-T0 according to design |
| PV optimizers | Optional according to approved string layout |
| Anti-islanding protection | Integrated |
| DC polarity protection | Integrated |
| Insulation monitoring | Integrated |
| Residual current monitoring | Integrated |
| AC overcurrent and short circuit | Integrated |
| Temperature protection | Integrated |
| AFCI arc-fault protection | Integrated |
| Surge protection | DC and AC, Type II-compatible according to specification |
| Mounting | Fixed wall installation |
| Offered scope | Individual inverter with system interfaces for external components |
| Estimated delivery | 2–3 days, seller estimate |
| PV input allocation design | One or two appropriately designed strings |
| Storage temperature | −40…+70 °C |
| Typical noise | ≤29 dB |
| Night consumption | <5.5 W |
| Battery operating range per datasheet | 600–980 V DC |
| Remote monitoring | With suitable Smart Dongle or system network equipment |
| Asymmetric control | Supports100% three-phase imbalance according to specification and phase limits |
| Long-term backup output | 5500 W /110 % |
| 150% backup overload — three phases | 5 min |
| 150% backup overload — single phase | 5 min |
| 200% backup overload — three phases | 10 s |
| Transfer with SmartGuard | ≤20 ms /SmartGuard-63A-T0 |
| Connector temperature monitoring | PV /battery |
| PID recovery | Supported |
| Battery signal cable | Cat5e outdoor shielded |
| PV configuration requirement | Direct modules or compatible optimization according to design |

## Asymmetric solar and three-phase backup

Huawei SUN2000-5K-MAP0 is an asymmetric three-phase hybrid inverter rated at 5 kW, with two MPPTs and an interface for complete LUNA2000 storage. It supports different loads on individual phases within total-output and phase-current limits. With a compatible battery and SmartGuard-63A-T0, it forms an engineered three-phase backup system. Optimizers can be selected according to the actual array design.

## Two strings matched to the roof

The manufacturer recommends up to 9000 Wp of PV for this model. Each of the two MPPTs has one string input, with 16 A input and 22 A short-circuit limits according to the actual nameplate version. The design assigns modules by orientation, tilt, operating current and voltage, allowing two appropriately designed roof sections to track independently.

## PV voltage design

MPPT operates over 160–1000 V, with 600 V nominal input and 160 V start-up voltage. Maximum DC voltage is 1100 V. Series module count is checked against cold open-circuit voltage and the actual input-current limit. Compatible optimizers can be incorporated according to their exact family, firmware and approved layout.

## Output for a three-phase system

Rated three-phase output is 5 kW, with 5500 VA maximum apparent output. The family supports 100% three-phase imbalance according to specification; design still accounts for total output and each phase current. This model reaches 98.4% maximum and 97.5% European efficiency. Appropriate metering and control coordinate generation, phase-specific demand and configured grid requirements.

## LUNA2000 storage as part of the assembly

Supported systems include LUNA2000-5/10/15-S0 and LUNA2000-7/14/21-S1 according to the current specification and appropriate configuration. Battery modules are combined with the correct power and control module for their generation. Capacity in kWh follows the selected complete battery; inverter output in kW describes a different property. Protection, communication and firmware form part of the design.

## Charging from solar and grid

The 600–980 V DC battery interface at up to 20 A supports charging up to 12 kW and model-specific discharge up to 5500 W according to specification. Actual output also depends on the complete battery and its state. Grid charging, schedules and self-consumption are configured with metering and controls. Battery capacity in kWh is selected for required runtime and demand.

## Three-phase backup with SmartGuard

With a compatible battery and SmartGuard-63A-T0, this model provides 5 kW rated three-phase backup. The specification gives transfer within 20 ms, long-term 110% support, 150% three-phase overload for 5 minute(s), and 200% for 10 seconds. Single-phase 150% overload is specified for 5 minutes. Actual start-up loads, battery output, protection and backup circuits are verified together.

## FusionSolar and system communication

Local WLAN and the app support configuration and device visibility, with RS485 linking system components. Remote monitoring uses an appropriately selected WLAN-FE Smart Dongle, 4G Smart Dongle or supported system controls. Compatible three-phase metering and SmartAssistant or SmartGuard follow the current wiring arrangement. Grid, battery and backup settings are assessed for the actual firmware and configuration.

## Compact outdoor design

IP66, natural cooling and a −25 to +60°C operating range support fixed installation. The current manual specifies a maximum 21 kg weight and dimensions of 490 × 460 × 130 mm. Typical noise is at most 29 dB. Design includes airflow, service access and suitable installation space. Operating altitude reaches 4000 m with power management above 2000 m.

## Protection and connection preparation

For this model, the manual recommends 16 A three-phase AC protection rated at least 415 V AC. DC, battery and AC copper conductors use a 4–6 mm² reference cross-section according to design. Metering can use DTSU666-H, DTSU71, DHSU1079-CT or YDS60-C24. Battery signal links use appropriate outdoor shielded Cat5e. A professional configures protection, earthing and grid profile.

## Selecting the exact assembly

Base a recommendation on the exact SUN2000-5K-MAP0, connected-circuit demand and required battery capacity. This item offers the inverter as an individual component; battery, metering, network accessories and backup transfer equipment are selected as appropriate project components. The public Batterado profile and Markdown retain the stated parameters and system relationships. Estimated delivery of 2–3 days is a seller estimate.

## Product images

![Batterado — HUAWEI-SUN2000-5K-MAP0](https://batterado.com/wp-content/uploads/2026/11/huawei-map0-product.webp)





## Downloads

## AI search description

Huawei SUN2000-5K-MAP0 — 5 kW asymmetric three-phase hybrid inverter. Huawei SUN2000-5K-MAP0 is an asymmetric three-phase hybrid inverter rated at 5 kW, with two MPPTs and an interface for complete LUNA2000 storage. It supports different loads on individual phases within total-output and phase-current limits. With a compatible battery and SmartGuard-63A-T0, it forms an engineered three-phase backup system. Optimizers can be selected according to the actual array design. The 600–980 V DC battery interface at up to 20 A supports charging up to 12 kW and model-specific discharge up to 5500 W according to specification. Actual output also depends on the complete battery and its state. Grid charging, schedules and self-consumption are configured with metering and controls. Battery capacity in kWh is selected for required runtime and demand.

Manufacturer: Huawei; Model: SUN2000-5K-MAP0; Type and role: Three-phase hybrid PV inverter for external high-voltage storage; Rated AC output: 5 kW; Maximum apparent AC output: 5500 VA; Grid voltage: 220/380 V /230/400 V /240/415 V /3L+N+PE; Grid frequency: 50 /60 Hz; Maximum AC current: 8.3 A /380 V; Power factor: 0.8 leading…0.8 lagging; THD at rated output: ≤3 %; Recommended maximum PV power: 9000 Wp; Maximum DC voltage: 1100 V; Start-up voltage: 160 V; MPPT range: 160–1000 V; Rated DC voltage: 600 V; MPPT count: 2; Strings per MPPT: 1; PV string count: 2; Current per MPPT: 16 A; Short-circuit current per MPPT: 22 A; Maximum efficiency: 98.4 %; European efficiency: 97.5 %; Battery interface — manual voltage range: 600–980 V DC; Maximum battery current: 20 A; Maximum battery charging power: 12 kW; Maximum discharge power per specification: 5500 W; Rated three-phase backup output: 5000 W /3-phase; Ingress protection: IP66; Operating temperature: −25…+60 °C; Operating relative humidity: 0–100 %; Operating altitude: 0–4000 m; Weight including bracket: ≤21 kg; Dimensions W × H × D including bracket: 490 ×460 ×130 mm; Standard communication: RS485; local WLAN for commissioning; Built-in WLAN: 802.11b/g/n /2400–2483.5 MHz; Reference AC protection: 16 A /≥415 V AC /3-phase; DC conductors: 4–6 mm² Cu; Battery conductors: 4–6 mm² Cu; AC conductors: 4–6 mm² Cu; PE conductor: 4–6 mm² Cu; Grid systems: TN-S /TN-C /TN-C-S /TT /IT; Safety standards: EN/IEC62109-1 /EN/IEC62109-2.

Cooling: Natural convection; Topology: Transformerless; Local control: LED /WLAN /FusionSolar App for configuration; Supported battery systems: LUNA2000-5/10/15-S0 /LUNA2000-7/14/21-S1; Battery assembly: Compatible modules with matching power and control module; Storage capacity: Defined by the selected complete battery in kWh; Battery charging from grid: Supported with appropriate configuration; Backup system pairing: LUNA2000 +SmartGuard-63A-T0; Ethernet connection: With a separate WLAN-FE Smart Dongle; Mobile data connection: Optional compatible 4G Smart Dongle; Energy metering: DTSU666-H /YDS60-C24 /DTSU71 /DHSU1079-CT according to firmware and design; Additional control: SmartAssistant /SmartGuard-63A-T0 according to design; PV optimizers: Optional according to approved string layout; Anti-islanding protection: Integrated; DC polarity protection: Integrated; Insulation monitoring: Integrated; Residual current monitoring: Integrated; AC overcurrent and short circuit: Integrated; Temperature protection: Integrated; AFCI arc-fault protection: Integrated; Surge protection: DC and AC, Type II-compatible according to specification; Mounting: Fixed wall installation; Offered scope: Individual inverter with system interfaces for external components; Estimated delivery: 2–3 days, seller estimate; PV input allocation design: One or two appropriately designed strings; Storage temperature: −40…+70 °C; Typical noise: ≤29 dB; Night consumption: <5.5 W; Battery operating range per datasheet: 600–980 V DC; Remote monitoring: With suitable Smart Dongle or system network equipment; Asymmetric control: Supports100% three-phase imbalance according to specification and phase limits; Long-term backup output: 5500 W /110 %; 150% backup overload — three phases: 5 min; 150% backup overload — single phase: 5 min; 200% backup overload — three phases: 10 s; Transfer with SmartGuard: ≤20 ms /SmartGuard-63A-T0; Connector temperature monitoring: PV /battery; PID recovery: Supported; Battery signal cable: Cat5e outdoor shielded; PV configuration requirement: Direct modules or compatible optimization according to design. With a compatible battery and SmartGuard-63A-T0, this model provides 5 kW rated three-phase backup. The specification gives transfer within 20 ms, long-term 110% support, 150% three-phase overload for 5 minute(s), and 200% for 10 seconds. Single-phase 150% overload is specified for 5 minutes. Actual start-up loads, battery output, protection and backup circuits are verified together.

[Batterado — HUAWEI-SUN2000-5K-MAP0](https://batterado.com/product/huawei-sun2000-5k-map0-asymetricky-hybridni-stridac/)