# Huawei LUNA2000-5-E0 — 5 kWh LiFePO4 battery module for LUNA2000 S0

SKU: LUNA2000-5-E0

Batterado: https://batterado.com/product/huawei-luna2000-5-e0-5kwh-bateriovy-modul/

Huawei LUNA2000-5-E0 adds 5 kWh to a modular LUNA2000 S0 storage system. One to three E0 modules operate with the LUNA2000-5KW-C0 power unit and a compatible Huawei inverter, creating 5, 10 or 15 kWh storage for homes, businesses and solar self-consumption.

## Technical specifications

| Parameter | Value |
|---|---|
| Manufacturer | Huawei |
| Model | LUNA2000-5-E0 |
| Product generation | LUNA2000 S0 |
| Type and role | Battery expansion module |
| Initial available capacity | 5 kWh |
| Cell chemistry | LiFePO4 |
| Required controller | LUNA2000-5KW-C0 |
| Quantity offered | 1 × LUNA2000-5-E0 |
| System with one E0 | 5 kWh /2.5 kW |
| System with two E0 | 10 kWh /5 kW |
| System with three E0 | 15 kWh /5 kW |
| 5 kWh system peak output | 3.5 kW /10 s |
| 10/15 kWh system peak output | 7 kW /10 s |
| Nominal system voltage — single phase | 450 V DC |
| System operating range — single phase | 350–560 V DC |
| Nominal system voltage — three phase | 600 V DC |
| System operating range — three phase | 600–980 V DC |
| System voltage reference | C0 interface to the compatible inverter |
| Protection rating | IP66 |
| Component operating temperature | −20…+55 °C |
| S0 system operating temperature | −20…+55 °C |
| Cooling | Natural convection |
| Operating altitude | 0–4000 m |
| Altitude sizing per system datasheet | Derating above 2000 m |
| System relative humidity | 5–95 % RH |
| Component weight | 50 kg |
| Dimensions W × H × D | 670 ×360 ×150 mm |
| Complete 5 kWh system dimensions | 670 ×600 ×150 mm /W×H×D |
| Complete 10 kWh system dimensions | 670 ×960 ×150 mm /W×H×D |
| Complete 15 kWh system dimensions | 670 ×1320 ×150 mm /W×H×D |
| System weight including floor stand 5/10/15 kWh | 63.8 /113.8 /163.8 kg |
| System communication | RS485 /CAN for parallel operation |
| System indication | SOC /LED |
| Commissioning | FusionSolar App |
| Core operating modes | Self-consumption /TOU /fully fed to grid |
| Grid charging | Through a compatible inverter with Charge from AC enabled in TOU |
| Backup power | Through a compatible inverter and matching BackupBox/SmartGuard |
| Compatible single-phase families | SUN2000-(2–6KTL)-L1 /SUN2000-(8K,10K)-LC0 |
| Compatible three-phase M1 family | SUN2000-(3–12KTL)-M1 per exact variant |
| Compatible MB0 families | SUN2000-(12K–25K)-MB0 /SUN5000-(17K,25K)-MB0 |
| Compatible MAP0 families | SUN2000-(5K–12K)-MAP0 /SUN5000-(8K,12K)-MAP0 |
| ESS firmware for LC0/MB0 | FusionSolarDG V100R002C00SPC125 or later |
| Standard expansion of two systems | Up to 30 kWh according to compatible topology |
| System installation | Floor-standing system /optional wall bracket |
| Estimated delivery | 2–3 days, seller estimate |

## Modular energy for everyday use

Huawei LUNA2000-5-E0 adds 5 kWh to a modular LUNA2000 S0 storage system. One to three E0 modules operate with the LUNA2000-5KW-C0 power unit and a compatible Huawei inverter, creating 5, 10 or 15 kWh storage for homes, businesses and solar self-consumption.

## Capacity and power have distinct roles

One E0 provides 5 kWh initial available capacity and 2.5 kW system output with C0. Two E0 modules provide 10 kWh and 5 kW; three provide 15 kWh and 5 kW. Energy determines runtime, power the simultaneous load. The inverter determines final AC output and phases.

## A correctly composed storage system

A functional system combines E0 batteries, a C0 power module, a compatible inverter and suitable mechanical and electrical connections. E0 adds capacity; C0 provides control and the DC interface. Order the separate components in the quantities required by the chosen system.

## Charging from solar and the grid

The inverter stores surplus solar energy for later use. Scheduled grid charging uses TOU mode and Charge from AC on the compatible inverter. Time windows, target SOC and permitted power are configured for the tariff and connection conditions.

## Compatibility by exact model

S0 storage connects to the manufacturer-listed L1, LC0, M1, MB0 and MAP0 variants and listed SUN5000 models. Design checks the exact inverter model, current firmware and supported topology. For LC0 and MB0, the manufacturer specifies ESS FusionSolarDG V100R002C00SPC125 or later.

## High-voltage integration

The C0 unit connects storage to the inverter BAT+ and BAT− terminals. Single-phase nominal system voltage is 450 V with a 350–560 V range; three-phase voltage is 600 V with a 600–980 V range. These values describe the C0-to-inverter system interface.

## Backup according to system design

Backup operation combines a compatible inverter with the matching BackupBox or SmartGuard. Design considers continuous and starting loads, available battery power and phase arrangement. Runtime follows energy demand in kWh and the configured SOC reserve.

## IP66 and natural cooling

The system combines IP66 protection and natural convection for indoor or outdoor installation according to installation conditions. The stated S0 system operating range is −20 to +55°C. The location provides the required space, secure mounting and commissioning/service access.

## Expansion in 5 kWh steps

One C0 controller operates up to three E0 modules. A second compatibly connected system supports standard expansion to 30 kWh. Expansion aligns the exact modules, firmware and capacity supported by the inverter.

## Energy overview in FusionSolar

FusionSolar supports commissioning and configuration of the available energy modes. SOC indication shows stored-energy status. Consumption measurement and control are matched to the inverter and installation design.

## Selection for actual energy demand

Selection first estimates simultaneous appliance power in kW, starting loads and energy over the required duration in kWh. It then matches the E0 count, C0 and inverter. These are components of a fixed storage installation; the connected system provides charging and AC power to appliances.

## Product images

![Batterado — LUNA2000-5-E0](https://batterado.com/wp-content/uploads/2026/11/product-59428-photo.webp)





## Downloads

## AI search description

Huawei LUNA2000-5-E0 — 5 kWh LiFePO4 battery module for LUNA2000 S0. Huawei LUNA2000-5-E0 adds 5 kWh to a modular LUNA2000 S0 storage system. One to three E0 modules operate with the LUNA2000-5KW-C0 power unit and a compatible Huawei inverter, creating 5, 10 or 15 kWh storage for homes, businesses and solar self-consumption. A functional system combines E0 batteries, a C0 power module, a compatible inverter and suitable mechanical and electrical connections. E0 adds capacity; C0 provides control and the DC interface. Order the separate components in the quantities required by the chosen system. Selection first estimates simultaneous appliance power in kW, starting loads and energy over the required duration in kWh. It then matches the E0 count, C0 and inverter. These are components of a fixed storage installation; the connected system provides charging and AC power to appliances.

Manufacturer: Huawei; Model: LUNA2000-5-E0; Product generation: LUNA2000 S0; Type and role: Battery expansion module; Initial available capacity: 5 kWh; Cell chemistry: LiFePO4; Required controller: LUNA2000-5KW-C0; Quantity offered: 1 × LUNA2000-5-E0; System with one E0: 5 kWh /2.5 kW; System with two E0: 10 kWh /5 kW; System with three E0: 15 kWh /5 kW; 5 kWh system peak output: 3.5 kW /10 s; 10/15 kWh system peak output: 7 kW /10 s; Nominal system voltage — single phase: 450 V DC; System operating range — single phase: 350–560 V DC; Nominal system voltage — three phase: 600 V DC; System operating range — three phase: 600–980 V DC; System voltage reference: C0 interface to the compatible inverter; Protection rating: IP66; Component operating temperature: −20…+55 °C; S0 system operating temperature: −20…+55 °C; Cooling: Natural convection; Operating altitude: 0–4000 m; Altitude sizing per system datasheet: Derating above 2000 m; System relative humidity: 5–95 % RH.

Component weight: 50 kg; Dimensions W × H × D: 670 ×360 ×150 mm; Complete 5 kWh system dimensions: 670 ×600 ×150 mm /W×H×D; Complete 10 kWh system dimensions: 670 ×960 ×150 mm /W×H×D; Complete 15 kWh system dimensions: 670 ×1320 ×150 mm /W×H×D; System weight including floor stand 5/10/15 kWh: 63.8 /113.8 /163.8 kg; System communication: RS485 /CAN for parallel operation; System indication: SOC /LED; Commissioning: FusionSolar App; Core operating modes: Self-consumption /TOU /fully fed to grid; Grid charging: Through a compatible inverter with Charge from AC enabled in TOU; Backup power: Through a compatible inverter and matching BackupBox/SmartGuard; Compatible single-phase families: SUN2000-(2–6KTL)-L1 /SUN2000-(8K,10K)-LC0; Compatible three-phase M1 family: SUN2000-(3–12KTL)-M1 per exact variant; Compatible MB0 families: SUN2000-(12K–25K)-MB0 /SUN5000-(17K,25K)-MB0; Compatible MAP0 families: SUN2000-(5K–12K)-MAP0 /SUN5000-(8K,12K)-MAP0; ESS firmware for LC0/MB0: FusionSolarDG V100R002C00SPC125 or later; Standard expansion of two systems: Up to 30 kWh according to compatible topology; System installation: Floor-standing system /optional wall bracket; Estimated delivery: 2–3 days, seller estimate. The inverter stores surplus solar energy for later use. Scheduled grid charging uses TOU mode and Charge from AC on the compatible inverter. Time windows, target SOC and permitted power are configured for the tariff and connection conditions. S0 storage connects to the manufacturer-listed L1, LC0, M1, MB0 and MAP0 variants and listed SUN5000 models. Design checks the exact inverter model, current firmware and supported topology. For LC0 and MB0, the manufacturer specifies ESS FusionSolarDG V100R002C00SPC125 or later.

[Batterado — LUNA2000-5-E0](https://batterado.com/product/huawei-luna2000-5-e0-5kwh-bateriovy-modul/)

[Huawei LUNA2000-5KW-C0](https://batterado.com/product/huawei-luna2000-5kw-c0-vykonovy-ridici-modul-5kw/)
