{"id":60660,"date":"2026-11-21T15:53:17","date_gmt":"2026-11-21T13:53:17","guid":{"rendered":"https:\/\/batterado.com\/product\/victron-smartsolar-mppt-100-20\/"},"modified":"2026-11-21T15:53:29","modified_gmt":"2026-11-21T13:53:29","slug":"victron-smartsolar-mppt-100-20","status":"publish","type":"product","link":"https:\/\/batterado.com\/en\/product\/victron-smartsolar-mppt-100-20\/","title":{"rendered":"Victron Energy SmartSolar MPPT 100\/20 Solar Charge Controller 20 A, 12\/24\/48 V Battery, PV up to 100 V"},"content":{"rendered":"<h2>Technical data<\/h2>\n<div class=\"wt-tech-grid\">\n<table>\n<tbody>\n<tr>\n<th>Brand<\/th>\n<td>Victron Energy<\/td>\n<\/tr>\n<tr>\n<th>Model<\/th>\n<td>SmartSolar MPPT 100\/20-48V<\/td>\n<\/tr>\n<tr>\n<th>Order code<\/th>\n<td>SCC110020160R<\/td>\n<\/tr>\n<tr>\n<th>Type<\/th>\n<td>MPPT solar charge controller with Bluetooth<\/td>\n<\/tr>\n<tr>\n<th>Battery voltage (auto select)<\/th>\n<td>12\/24\/48 V<\/td>\n<\/tr>\n<tr>\n<th>Rated charge current<\/th>\n<td>20 A<\/td>\n<\/tr>\n<tr>\n<th>Nominal PV power at 12 V<\/th>\n<td>290 W<\/td>\n<\/tr>\n<tr>\n<th>Nominal PV power at 24 V<\/th>\n<td>580 W<\/td>\n<\/tr>\n<tr>\n<th>Nominal PV power at 48 V<\/th>\n<td>1,160 W<\/td>\n<\/tr>\n<tr>\n<th>Max. PV open circuit voltage<\/th>\n<td>100 V<\/td>\n<\/tr>\n<tr>\n<th>Max. PV short circuit current<\/th>\n<td>20 A<\/td>\n<\/tr>\n<tr>\n<th>PV start condition<\/th>\n<td>The PV voltage must exceed Vbat + 5 V to start; afterwards the minimum is Vbat + 1 V<\/td>\n<\/tr>\n<tr>\n<th>Limit with excess PV power<\/th>\n<td>If more PV power is connected, the controller limits the input power<\/td>\n<\/tr>\n<tr>\n<th>Maximum efficiency<\/th>\n<td>98 % (peak)<\/td>\n<\/tr>\n<tr>\n<th>Self-consumption<\/th>\n<td>load on: 26 \/ 20 \/ 19 mA (12 \/ 24 \/ 48 V); load off: 10 \/ 8 \/ 7 mA<\/td>\n<\/tr>\n<tr>\n<th>Charge voltage &#8220;absorption&#8221; (default, adjustable)<\/th>\n<td>14.4 V \/ 28.8 V \/ 57.6 V<\/td>\n<\/tr>\n<tr>\n<th>Charge voltage &#8220;float&#8221; (default, adjustable)<\/th>\n<td>13.8 V \/ 27.6 V \/ 55.2 V<\/td>\n<\/tr>\n<tr>\n<th>Charge algorithm<\/th>\n<td>multi-stage adaptive<\/td>\n<\/tr>\n<tr>\n<th>Temperature compensation<\/th>\n<td>\u221216 mV\/\u00b0C (12 V), \u221232 mV\/\u00b0C (24 V)<\/td>\n<\/tr>\n<tr>\n<th>Automatic load disconnect<\/th>\n<td>yes<\/td>\n<\/tr>\n<tr>\n<th>Max. continuous load current<\/th>\n<td>20 A \/ 20 A \/ 1 A (12 \/ 24 \/ 48 V)<\/td>\n<\/tr>\n<tr>\n<th>Low voltage load disconnect<\/th>\n<td>11.1 V \/ 22.2 V \/ 44.4 V or 11.8 V \/ 23.6 V \/ 47.2 V, or Battery Life algorithm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<table>\n<tbody>\n<tr>\n<th>Low voltage load reconnect<\/th>\n<td>13.1 V \/ 26.2 V \/ 52.4 V or 14 V \/ 28 V \/ 56 V, or Battery Life algorithm<\/td>\n<\/tr>\n<tr>\n<th>Load output on the 48 V model<\/th>\n<td>short circuit proof; on 48 V it is intended to interface with a relay<\/td>\n<\/tr>\n<tr>\n<th>Fully discharged battery recovery<\/th>\n<td>Starts charging even if the battery has been discharged to zero volts; reconnects to a fully discharged Li-ion battery with integrated disconnect function<\/td>\n<\/tr>\n<tr>\n<th>Temperature sensor<\/th>\n<td>Internal temperature sensor compensates absorption and float voltage; optional external battery voltage and temperature sensing via Bluetooth<\/td>\n<\/tr>\n<tr>\n<th>Power terminals<\/th>\n<td>6 mm\u00b2 \/ AWG10<\/td>\n<\/tr>\n<tr>\n<th>Data communication port<\/th>\n<td>VE.Direct<\/td>\n<\/tr>\n<tr>\n<th>Communication: VE.Direct<\/th>\n<td>wired data connection to a Color Control GX, other GX products, PC or other devices<\/td>\n<\/tr>\n<tr>\n<th>Communication: Bluetooth Smart<\/th>\n<td>built-in; wireless set-up, monitoring, update and synchronisation of SmartSolar charge controllers<\/td>\n<\/tr>\n<tr>\n<th>Compatibility: GX devices and PC<\/th>\n<td>Color Control GX and other GX products, PC or other devices via VE.Direct<\/td>\n<\/tr>\n<tr>\n<th>Compatibility: Bluetooth battery sensing<\/th>\n<td>Smart Battery Sense or BMV-712 Smart Battery Monitor (battery voltage and temperature for one or more SmartSolar charge controllers)<\/td>\n<\/tr>\n<tr>\n<th>Further functions<\/th>\n<td>programmable battery charge algorithm; day\/night timing and light dimming option (details in the manufacturer&#8217;s software section)<\/td>\n<\/tr>\n<tr>\n<th>Protection<\/th>\n<td>output short circuit \/ over temperature<\/td>\n<\/tr>\n<tr>\n<th>Operating temperature<\/th>\n<td>\u221230 to +60 \u00b0C (full rated output up to 40 \u00b0C)<\/td>\n<\/tr>\n<tr>\n<th>Humidity<\/th>\n<td>95 %, non-condensing<\/td>\n<\/tr>\n<tr>\n<th>Colour<\/th>\n<td>blue (RAL 5012)<\/td>\n<\/tr>\n<tr>\n<th>Protection category<\/th>\n<td>IP43 (electronic components), IP22 (connection area)<\/td>\n<\/tr>\n<tr>\n<th>Dimensions (h \u00d7 w \u00d7 d)<\/th>\n<td>100 \u00d7 131 \u00d7 60 mm<\/td>\n<\/tr>\n<tr>\n<th>Weight<\/th>\n<td>0.65 kg<\/td>\n<\/tr>\n<tr>\n<th>Stored trends<\/th>\n<td>battery voltage, current and temperature, load output current, PV voltage and PV current<\/td>\n<\/tr>\n<tr>\n<th>Number of days trends data is stored<\/th>\n<td>46<\/td>\n<\/tr>\n<tr>\n<th>Standards: safety<\/th>\n<td>EN\/IEC 62109-1, UL 1741, CSA C22.2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h2>A compact MPPT controller for 12, 24 and 48 V batteries<\/h2>\n<p>The Victron Energy SmartSolar MPPT 100\/20-48 V is the smallest controller in this range that can handle a 48 V battery. The case measures only 100 \u00d7 131 \u00d7 60 mm and weighs 0.65 kg. It detects the battery voltage automatically (12\/24\/48 V), has a rated charge current of 20 A and reaches a peak efficiency of 98 %.<\/p>\n<p>The smaller models of the range (MPPT 75\/10, 75\/15 and 100\/15) cannot do this, because they work only with 12 and 24 V. For 48 V systems the MPPT 100\/20-48 V is therefore the entry point to the SmartSolar range, suited to cases where the solar array is modest and the battery has a higher voltage.<\/p>\n<p>The controller has built-in Bluetooth, so it is set up and monitored from a phone, and a VE.Direct data port for a wired connection to a GX device. A load output with automatic disconnect adds protection against deep discharge to the charging function.<\/p>\n<h2>PV array: up to 100 V and a power rating that depends on battery voltage<\/h2>\n<p>The maximum open-circuit voltage of the PV array is 100 V and the short-circuit current must not exceed 20 A. A higher short-circuit current may damage the controller, so when designing the array you check not only the voltage but also the current of the series string.<\/p>\n<p>Nominal PV power depends on the battery voltage: 290 W at 12 V, 580 W at 24 V and 1,160 W at 48 V. At 48 V the controller therefore uses an array four times larger than at 12 V, because at the same current the power rises with voltage. If more power is connected, the controller limits the input power.<\/p>\n<p>To start, the PV voltage must exceed the battery voltage by 5 V (about 53 V with a 48 V battery); after that, 1 V above the battery is enough. The 100 V limit on the input therefore constrains string length in both directions with a 48 V battery: the string must still work in weak light, yet stay below 100 V in the cold.<\/p>\n<h2>Battery charging and temperature compensation<\/h2>\n<p>Charging uses a multi-stage adaptive algorithm. The default absorption voltage is 14.4 V \/ 28.8 V \/ 57.6 V and the float voltage 13.8 V \/ 27.6 V \/ 55.2 V for 12 \/ 24 \/ 48 V. Both can be adjusted and the algorithm is fully programmable, so it can be adapted to lead-acid or lithium batteries according to the battery manufacturer&#8217;s recommendation.<\/p>\n<p>The internal temperature sensor compensates the absorption and float voltage by \u221216 mV\/\u00b0C at 12 V and \u221232 mV\/\u00b0C at 24 V. External sensing is more accurate: a Smart Battery Sense or a BMV-712 Smart Battery Monitor sends battery voltage and temperature to the controller over Bluetooth, so compensation follows the real battery temperature, not that of the controller case.<\/p>\n<p>If the battery has been discharged to zero volts, the controller still starts charging. With a Li-ion battery that has an integrated disconnect function, it can reconnect to the battery after a complete discharge.<\/p>\n<h2>Load output and the Battery Life algorithm<\/h2>\n<p>Unlike the larger SmartSolar models 100\/30, 100\/50 and 150\/45, this controller has a load output. It disconnects the loads connected to it when the battery voltage falls to a set level, preventing over-discharge. The output is short circuit proof.<\/p>\n<p>The maximum continuous load current is 20 A at 12 V and 24 V, but only 1 A at 48 V. On the 48 V version the output therefore serves to drive a relay, which then switches the actual load. Disconnect thresholds: 11.1 \/ 22.2 \/ 44.4 V or 11.8 \/ 23.6 \/ 47.2 V; reconnect at 13.1 \/ 26.2 \/ 52.4 V or 14 \/ 28 \/ 56 V.<\/p>\n<p>An alternative to fixed thresholds is the Battery Life algorithm. It monitors the state of charge and raises the load disconnect level slightly day by day until the solar energy is sufficient to recharge to nearly 100 %. After that it modulates the level so that a nearly full recharge happens about once a week. This protects lead-acid batteries, which would otherwise be destroyed within weeks or months by continual cycling between partial charge and discharge.<\/p>\n<h2>Typical use for a 20 A current<\/h2>\n<p>With a charge current of 20 A the controller is sized for small and medium installations: back-up and off-grid supply of smaller buildings, cottages, caravans, boats and other small systems where the PV array does not exceed 1,160 W at 48 V, 580 W at 24 V or 290 W at 12 V.<\/p>\n<p>For larger arrays choose higher currents. The SmartSolar range offers the 100\/30 and 100\/50 (12\/24 V only) and the 150\/45 with a higher input voltage and batteries up to 48 V. This model is the right choice when you need a 48 V battery and a load output and the array is smaller.<\/p>\n<p>Several controllers can be connected to one battery. Bluetooth synchronisation then coordinates their charging so that they work as one system.<\/p>\n<h2>System connection: VE.Direct and GX devices<\/h2>\n<p>The controller communicates through the VE.Direct port. A cable connects it to a Color Control GX and other GX products, to a PC or to other devices. The GX device then collects data from the controller, the battery and other components and provides a remote overview through the VRM portal.<\/p>\n<p>VE.Direct is used to read measured values and settings. The controller can also obtain battery voltage and temperature wirelessly from a Smart Battery Sense or BMV-712 Smart, without additional cables.<\/p>\n<p>The controller works on the DC side between the PV array and the battery. Data on yield and charging state therefore reach the GX device together with data from other connected components and can be followed in one place.<\/p>\n<h2>Bluetooth, monitoring and stored trends<\/h2>\n<p>The wireless Bluetooth Smart is used to set up, monitor and update the firmware and to synchronise controllers. A phone or tablet shows the current PV power, battery voltage, current and charging state and lets you change charging parameters.<\/p>\n<p>The controller stores trends for the last 46 days: battery voltage, current and temperature, load output current, and PV voltage and current. From them you can judge in retrospect how the battery has been charging over recent weeks and whether the array delivers the expected power.<\/p>\n<p>For long-term monitoring and a remote overview, use a GX device with the VRM portal; for a quick check on site, the phone app is enough.<\/p>\n<h2>Installation, terminals and protection<\/h2>\n<p>The power terminals accept wires up to 6 mm\u00b2 (AWG10). The enclosure has protection category IP43 for the electronics and IP22 for the connection area, so it is intended for a dry space. The operating temperature is \u221230 to +60 \u00b0C, full output is available up to 40 \u00b0C, and humidity may reach 95 % non-condensing.<\/p>\n<p>The controller is protected against output short circuit and over temperature. Dimensions (h \u00d7 w \u00d7 d) are 100 \u00d7 131 \u00d7 60 mm, weight 0.65 kg, colour blue RAL 5012. Safety standards: EN\/IEC 62109-1, UL 1741, CSA C22.2.<\/p>\n<p>Connect the array and the battery according to the manufacturer&#8217;s manual, with fuses and conductors sized for the current. Installation and wiring should be carried out by a suitably qualified person.<\/p>\n<section class=\"tomo-ai-search-profile\">\n<h2>AI search description<\/h2>\n<p>The Victron Energy SmartSolar MPPT 100\/20-48 V (order code SCC110020160R) is an MPPT solar charge controller with Bluetooth for 12\/24\/48 V batteries with automatic voltage selection. Rated charge current 20 A, PV power 290 W at 12 V, 580 W at 24 V and 1,160 W at 48 V, open-circuit PV voltage up to 100 V, short-circuit current up to 20 A, peak efficiency 98 %. Load output with automatic disconnect and the Battery Life algorithm (max. 1 A at 48 V, for a relay). VE.Direct communication with GX products and Bluetooth, battery sensing via Smart Battery Sense or BMV-712 Smart. IP43, 0.65 kg. Use: smaller off-grid and back-up systems with a 48 V battery.<\/p>\n<p>Product page: <a href=\"https:\/\/batterado.com\/product\/victron-smartsolar-mppt-100-20\/\">https:\/\/batterado.com\/product\/victron-smartsolar-mppt-100-20\/<\/a><\/p>\n<\/section>\n","protected":false},"excerpt":{"rendered":"<p><strong>An MPPT controller for 12, 24 or 48 V batteries in a compact case: the Victron Energy SmartSolar MPPT 100\/20-48 V charges at 20 A and handles up to 1,160 W of PV at 48 V.<\/strong><\/p>\n<ul>\n<li>Battery voltage 12\/24\/48 V is selected automatically.<\/li>\n<li>PV input up to 100 V, short-circuit current up to 20 A.<\/li>\n<li>Load output with automatic disconnect and the Battery Life algorithm.<\/li>\n<li>Bluetooth and VE.Direct for GX devices, peak efficiency 98 %.<\/li>\n<\/ul>\n<p>The 100 \u00d7 131 \u00d7 60 mm case weighs 0.65 kg. It suits smaller off-grid and back-up installations, caravans and boats, where a small solar array feeds a 48 V battery. Set-up and monitoring are wireless from a phone, and the controller stores trend data for 46 days by itself.<\/p>\n","protected":false},"featured_media":60661,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[3882],"product_cat":[3615,3403],"product_tag":[3108,3928,3927],"class_list":["post-60660","product","type-product","status-publish","has-post-thumbnail","product_brand-victron-energy","product_cat-photovoltaic-accessories","product_cat-solar-panel-kits","product_tag-mppt","product_tag-scc110020160r","product_tag-solarni-regulator-nabijeni","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product\/60660","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/comments?post=60660"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/media\/60661"}],"wp:attachment":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/media?parent=60660"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_brand?post=60660"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_cat?post=60660"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_tag?post=60660"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}