{"id":60575,"date":"2026-11-21T15:50:29","date_gmt":"2026-11-21T13:50:29","guid":{"rendered":"https:\/\/batterado.com\/product\/victron-mk3-usb-c\/"},"modified":"2026-11-21T15:50:38","modified_gmt":"2026-11-21T13:50:38","slug":"victron-mk3-usb-c","status":"publish","type":"product","link":"https:\/\/batterado.com\/en\/product\/victron-mk3-usb-c\/","title":{"rendered":"Victron Energy Interface MK3-USB-C VE.Bus to USB-C interface for configuring MultiPlus, MultiPlus-II and Quattro (ASS030140030)"},"content":{"rendered":"<h2>Technical data<\/h2>\n<div class=\"wt-tech-grid\">\n<table>\n<tbody>\n<tr>\n<th>Brand<\/th>\n<td>Victron Energy<\/td>\n<\/tr>\n<tr>\n<th>Model<\/th>\n<td>Interface MK3-USB-C (VE.Bus to USB-C)<\/td>\n<\/tr>\n<tr>\n<th>Order code<\/th>\n<td>ASS030140030<\/td>\n<\/tr>\n<tr>\n<th>Type<\/th>\n<td>VE.Bus to USB-C interface<\/td>\n<\/tr>\n<tr>\n<th>Use<\/th>\n<td>connecting VE.Bus devices to a computer for configuration and firmware updates<\/td>\n<\/tr>\n<tr>\n<th>Computer side<\/th>\n<td>USB-C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<table>\n<tbody>\n<tr>\n<th>Device side<\/th>\n<td>VE.Bus<\/td>\n<\/tr>\n<tr>\n<th>Communication protocol<\/th>\n<td>VE.Bus<\/td>\n<\/tr>\n<tr>\n<th>Compatibility: inverter\/chargers<\/th>\n<td>Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro<\/td>\n<\/tr>\n<tr>\n<th>Compatibility: inverter\/charger settings in systems<\/th>\n<td>ECOmulti, EasySolar, EasyPlus<\/td>\n<\/tr>\n<tr>\n<th>Compatibility: other devices<\/th>\n<td>VE.Bus BMS V2; inverters with a VE.Bus communication port<\/td>\n<\/tr>\n<tr>\n<th>Configuration software<\/th>\n<td>Victron configuration tools for VE.Bus products; VictronConnect guide for VE.Bus products<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h2>What the Interface MK3-USB-C is for<\/h2>\n<p>The Interface MK3-USB-C is an interface that converts VE.Bus communication to USB-C. It connects Victron Energy devices with a VE.Bus port to a computer running the configuration software. It serves two purposes: configuring the devices and updating their firmware.<\/p>\n<p>It is a service and installation tool. It is typically used when commissioning a system, when changing inverter\/charger parameters and when updating firmware. The USB-C connector on the computer side suits current notebooks; the order code of this card is ASS030140030.<\/p>\n<h2>Which devices the interface supports<\/h2>\n<p>According to Victron, the interface lets the following devices be connected to a computer: Multi, MultiGrid, MultiPlus, MultiPlus-II and Quattro, as well as the VE.Bus BMS V2, the inverter\/charger settings in ECOmulti, EasySolar and EasyPlus, and inverters with a VE.Bus communication port.<\/p>\n<p>The common denominator is the VE.Bus port. Devices without VE.Bus, for example solar chargers with a VE.Direct port, are not configured with this interface. Before buying, check that the device you want to configure has a VE.Bus port.<\/p>\n<h2>Configuration and firmware updates<\/h2>\n<p>More than individual parameters, the working procedure matters here: a VE.Bus device is configured in the Victron configuration tools for VE.Bus products, which also have the VictronConnect guide for VE.Bus products. The interface is the physical and communication bridge between those tools and the device.<\/p>\n<p>Device firmware is updated by the same route. The VE.Bus Smart dongle cannot do this: Victron&#8217;s manual for it states explicitly that the inverter\/charger cannot be configured nor its firmware updated through the dongle, and it refers to the VictronConnect guide for VE.Bus for these tasks. An installer who has both tools uses the MK3-USB-C for service and the dongle for everyday control from a phone.<\/p>\n<h2>Connection<\/h2>\n<p>The interface is connected between the computer and the VE.Bus port of the device. The computer side is USB-C, the device side VE.Bus. If several devices are connected in a setup, for example parallel or three-phase operation of several inverters, those devices are linked by the VE.Bus and the interface is connected to one of them.<\/p>\n<p>When working with the interface, follow the general rules for servicing inverters: switch the device off and disconnect the sources before touching the wiring. Installation and wiring belong to a suitably qualified person.<\/p>\n<h2>MK3-USB-C in a system with a GX device and ESS<\/h2>\n<p>In a system with a GX device, for example a Cerbo GX, and a MultiPlus-II or Quattro inverter\/charger, the inverter\/charger communicates with the GX device over VE.Bus. The MK3-USB-C interface does not enter such a system as a permanent component: it is used on the installer&#8217;s side when setting up or updating the inverter\/charger and is disconnected when the work is done.<\/p>\n<p>This keeps control of the inverter\/charger parameters available even where everyday operation is followed through VRM and VictronConnect. Remote VEConfigure changes through VRM are a matter of the GX device; the MK3-USB-C is the route for local work on site.<\/p>\n<h2>What to combine the interface with<\/h2>\n<p>The MK3-USB-C is combined with a notebook or computer with the chosen Victron configuration software and with an inverter\/charger or BMS with a VE.Bus port. For everyday control from a phone and battery temperature and voltage measurement, the VE.Bus Smart dongle Bluetooth module complements the interface. For long-term remote supervision, a GX device such as the Cerbo GX and the VRM portal complement the system.<\/p>\n<p>Cabling to the inverter\/charger and to the computer is part of the installation, and the choice of lengths depends on the site.<\/p>\n<h2>Operation and service<\/h2>\n<p>The interface has no operating function of its own during normal running of the system; it is used for interventions during installation and service. After every update or change of parameters it is advisable to verify the system function: inverter\/charger status, battery charging and communication with the GX device.<\/p>\n<p>Before a firmware update make sure you use current configuration software and that the device stays powered throughout the update. The procedure is given in the VictronConnect guide for VE.Bus products.<\/p>\n<section class=\"tomo-ai-search-profile\">\n<h2>AI search description<\/h2>\n<p>The Victron Energy Interface MK3-USB-C (order code ASS030140030) is a VE.Bus to USB-C interface that connects devices with a VE.Bus port to a computer for configuration and firmware updates. According to Victron it is intended for Multi, MultiGrid, MultiPlus, MultiPlus-II and Quattro, for the VE.Bus BMS V2, for the inverter\/charger settings in ECOmulti, EasySolar and EasyPlus, and for inverters with a VE.Bus communication port. Configuration is done in the Victron configuration tools for VE.Bus products, and a guide is available for VictronConnect.<\/p>\n<p>Product page: <a href=\"https:\/\/batterado.com\/product\/victron-mk3-usb-c\/\">https:\/\/batterado.com\/product\/victron-mk3-usb-c\/<\/a><\/p>\n<\/section>\n","protected":false},"excerpt":{"rendered":"<p><strong>The Victron Energy Interface MK3-USB-C connects VE.Bus devices to a computer through a USB-C connector, so that Victron inverter\/chargers can be configured and their firmware updated.<\/strong><\/p>\n<ul>\n<li>VE.Bus to USB-C interface for configuration and firmware updates.<\/li>\n<li>For Multi, MultiGrid, MultiPlus, MultiPlus-II and Quattro.<\/li>\n<li>Also usable for the VE.Bus BMS V2 and for inverters with a VE.Bus communication port.<\/li>\n<li>Configuration in the Victron configuration tools for VE.Bus products; guide for VictronConnect.<\/li>\n<\/ul>\n<p>The interface suits everyday service and commissioning: it is connected between a computer with a USB-C port and the VE.Bus port of the device. Unlike the VE.Bus Smart dongle Bluetooth module, it is the one used for setting parameters and updating firmware.<\/p>\n","protected":false},"featured_media":60576,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[3882],"product_cat":[3615,3403],"product_tag":[3904,3903,3902],"class_list":["post-60575","product","type-product","status-publish","has-post-thumbnail","product_brand-victron-energy","product_cat-photovoltaic-accessories","product_cat-solar-panel-kits","product_tag-ass030140030","product_tag-rozhrani","product_tag-ve-bus","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product\/60575","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/comments?post=60575"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/media\/60576"}],"wp:attachment":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/media?parent=60575"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_brand?post=60575"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_cat?post=60575"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_tag?post=60575"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}