{"id":60533,"date":"2026-11-21T15:49:17","date_gmt":"2026-11-21T13:49:17","guid":{"rendered":"https:\/\/batterado.com\/product\/victron-cerbo-gx-mk2\/"},"modified":"2026-11-21T15:49:23","modified_gmt":"2026-11-21T13:49:23","slug":"victron-cerbo-gx-mk2","status":"publish","type":"product","link":"https:\/\/batterado.com\/en\/product\/victron-cerbo-gx-mk2\/","title":{"rendered":"Victron Energy Cerbo GX MK2 GX communication centre for system monitoring and control (BPP900451100)"},"content":{"rendered":"<h2>Technical data<\/h2>\n<div class=\"wt-tech-grid\">\n<table>\n<tbody>\n<tr>\n<th>Brand<\/th>\n<td>Victron Energy<\/td>\n<\/tr>\n<tr>\n<th>Model<\/th>\n<td>Cerbo GX MK2<\/td>\n<\/tr>\n<tr>\n<th>Order code<\/th>\n<td>BPP900451100<\/td>\n<\/tr>\n<tr>\n<th>Type<\/th>\n<td>GX communication centre (system monitoring and control)<\/td>\n<\/tr>\n<tr>\n<th>Supply voltage<\/th>\n<td>8\u201370 V DC<\/td>\n<\/tr>\n<tr>\n<th>Power draw without GX Touch<\/th>\n<td>2.8 W @ 12 V<\/td>\n<\/tr>\n<tr>\n<th>Power draw with GX Touch<\/th>\n<td>backlight off: 3.8 W @ 12 V; backlight at max: 4.8 W @ 12 V<\/td>\n<\/tr>\n<tr>\n<th>Resistive tank level inputs<\/th>\n<td>4<\/td>\n<\/tr>\n<tr>\n<th>Temperature sense inputs<\/th>\n<td>4<\/td>\n<\/tr>\n<tr>\n<th>Digital inputs<\/th>\n<td>4<\/td>\n<\/tr>\n<tr>\n<th>Relays<\/th>\n<td>2 \u00d7 NO\/NC; DC up to 30 V: 6 A; DC up to 70 V: 1 A; AC: 6 A, 125 V AC<\/td>\n<\/tr>\n<tr>\n<th>Relay functions<\/th>\n<td>Relay 1: alarm relay, generator start\/stop, tank pump, temperature-controlled relay or manual operation; Relay 2: temperature-controlled relay or manual operation (requires firmware 2.80 or higher)<\/td>\n<\/tr>\n<tr>\n<th>VE.Direct ports<\/th>\n<td>3 (always isolated)<\/td>\n<\/tr>\n<tr>\n<th>Max. possible VE.Direct devices<\/th>\n<td>15 (in total, including devices connected over USB)<\/td>\n<\/tr>\n<tr>\n<th>VE.Bus port<\/th>\n<td>2 paralleled RJ45 sockets (always isolated)<\/td>\n<\/tr>\n<tr>\n<th>VE.Can ports<\/th>\n<td>2 \u00d7 RJ45: VE.Can 1 isolated, VE.Can 2 non-isolated<\/td>\n<\/tr>\n<tr>\n<th>BMS-Can port<\/th>\n<td>yes, see VE.Can<\/td>\n<\/tr>\n<tr>\n<th>Ethernet<\/th>\n<td>10\/100 RJ45 socket, isolated except shield<\/td>\n<\/tr>\n<tr>\n<th>USB<\/th>\n<td>3 USB Host ports<\/td>\n<\/tr>\n<tr>\n<th>Other connectors<\/th>\n<td>HDMI, Micro SD slot, power in<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<table>\n<tbody>\n<tr>\n<th>VE.Direct communication<\/th>\n<td>yes (3 isolated ports)<\/td>\n<\/tr>\n<tr>\n<th>VE.Bus communication<\/th>\n<td>yes<\/td>\n<\/tr>\n<tr>\n<th>VE.Can communication<\/th>\n<td>yes (VE.Can 1 isolated, VE.Can 2 non-isolated)<\/td>\n<\/tr>\n<tr>\n<th>BMS-Can communication<\/th>\n<td>yes, see VE.Can<\/td>\n<\/tr>\n<tr>\n<th>Bluetooth<\/th>\n<td>yes; intended for initial connection and network configuration, cannot connect to other Victron products (e.g. SmartSolar)<\/td>\n<\/tr>\n<tr>\n<th>WiFi<\/th>\n<td>built-in<\/td>\n<\/tr>\n<tr>\n<th>Remote monitoring<\/th>\n<td>Victron Remote Monitoring (VRM) portal and VRM app<\/td>\n<\/tr>\n<tr>\n<th>Local access<\/th>\n<td>VictronConnect (Bluetooth), optional GX Touch 50 \/ 70, Multi Functional Display (MFD), Remote Console over the LAN or the WiFi access point<\/td>\n<\/tr>\n<tr>\n<th>Compatible display<\/th>\n<td>GX Touch 50 and GX Touch 70 (optional accessory)<\/td>\n<\/tr>\n<tr>\n<th>Compatible DIN rail adapter<\/th>\n<td>DIN35 adapter small (not included)<\/td>\n<\/tr>\n<tr>\n<th>Temperature sensor<\/th>\n<td>temperature sensor for Quattro, MultiPlus and GX devices (such as the Cerbo GX), optional accessory<\/td>\n<\/tr>\n<tr>\n<th>MK3 variant<\/th>\n<td>Cerbo GX MK3 (BPP900451130) is the faster variant with 3 VE.Direct ports and max. 25 VE.Direct devices<\/td>\n<\/tr>\n<tr>\n<th>Mounting<\/th>\n<td>wall or 35 mm DIN rail (requires the DIN35 adapter small)<\/td>\n<\/tr>\n<tr>\n<th>Outer dimensions (h \u00d7 w \u00d7 d)<\/th>\n<td>78 \u00d7 154 \u00d7 48 mm<\/td>\n<\/tr>\n<tr>\n<th>IP rating<\/th>\n<td>IP20<\/td>\n<\/tr>\n<tr>\n<th>Operating temperature range<\/th>\n<td>-20 to +50 \u00b0C<\/td>\n<\/tr>\n<tr>\n<th>Accessories included<\/th>\n<td>accessories supplied with the Cerbo GX (power cable, terminal connectors, RJ45 cables)<\/td>\n<\/tr>\n<tr>\n<th>Standards \u2013 safety<\/th>\n<td>IEC 62368-1<\/td>\n<\/tr>\n<tr>\n<th>Standards \u2013 EMC<\/th>\n<td>EN 301489-1, EN 301489-17<\/td>\n<\/tr>\n<tr>\n<th>Standards \u2013 automotive<\/th>\n<td>ECE R10-6<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h2>What the Cerbo GX MK2 is for<\/h2>\n<p>The Cerbo GX MK2 is a communication centre that collects data from Victron devices in one place and allows you to monitor and control them. It provides perfect control over the system from anywhere while maximising its performance. The system can be accessed via the Victron Remote Management (VRM) portal, directly using the optional GX Touch display, via a Multi Functional Display (MFD) or via the VictronConnect app.<\/p>\n<p>The Cerbo GX is available as the MK2 and the MK3. Depending on the load, the MK3 is three to four times faster than the MK2 and suits systems where maximum CPU performance is required. This card describes the MK2 version with order code BPP900451100.<\/p>\n<h2>Ports and communication interfaces<\/h2>\n<p>The Cerbo GX MK2 has <strong>3 VE.Direct ports<\/strong>, which are always isolated. Up to 15 VE.Direct devices can be connected in total, for example MPPT solar charge controllers. Devices connected over USB count towards this number; the limit is mostly bound by CPU processing power. There is also a separate limit for PV inverters, of which often several are connected.<\/p>\n<p>The <strong>VE.Bus<\/strong> port consists of two paralleled RJ45 sockets, always isolated. Two <strong>VE.Can<\/strong> ports are available: VE.Can 1 is isolated, VE.Can 2 is non-isolated. The <strong>BMS-Can<\/strong> port is part of VE.Can. In addition there are 3 USB Host ports, <strong>Ethernet<\/strong> 10\/100 with an RJ45 socket (isolated except the shield), built-in <strong>Wi-Fi<\/strong> and <strong>Bluetooth<\/strong>. An HDMI connector and a Micro SD slot are also available.<\/p>\n<p>Bluetooth is intended for the initial connection and network configuration via the VictronConnect app. It cannot be used to connect to other Victron products, for example SmartSolar charge controllers.<\/p>\n<h2>Inputs, outputs and relays<\/h2>\n<p>For additional measurements and switching the Cerbo GX MK2 has <strong>4 resistive tank level inputs<\/strong>, <strong>4 temperature sense inputs<\/strong> and <strong>4 digital inputs<\/strong>. With them tank levels and temperatures can be followed in the system and the results seen in the VRM portal.<\/p>\n<p>There are <strong>2 relays<\/strong> with a NO\/NC changeover contact. Rating: DC up to 30 V 6 A, DC up to 70 V 1 A, AC 6 A at 125 V AC. Relay 1 can be programmed as an alarm relay, for generator start\/stop, as a tank pump, as a temperature-controlled relay or for manual operation. Relay 2 is available in the Relay menu of the GX device as a temperature-controlled relay or for manual operation; it requires firmware 2.80 or higher.<\/p>\n<h2>Monitoring, control and configuration via VRM<\/h2>\n<p>The Cerbo GX connects to the Victron Remote Monitoring (VRM) portal, bringing the whole installation online through any web browser or the VRM mobile app. Data is logged continuously, also when the internet connection is temporarily lost.<\/p>\n<ul>\n<li><strong>Monitoring and alerts:<\/strong> follow the battery state of charge, power consumption and harvest from PV, generator and mains, and check tank levels and temperatures. Historical data remains available for analysis and alarms are reported by e-mail or push notification.<\/li>\n<li><strong>Remote control:<\/strong> set the shore power input current limit, start and stop the generator, switch relays, adjust ESS settings, operate inverter\/chargers and EV charging stations, and control connected smart switches such as Shelly or Safiery.<\/li>\n<li><strong>Remote maintenance:<\/strong> follow up on alerts, run diagnostic checks and resolve problems remotely, firmware updates and VEConfigure changes included.<\/li>\n<li><strong>Remote Console:<\/strong> full access to the Cerbo GX user interface over the internet, and locally over the LAN or the WiFi access point when there is no internet connection on site.<\/li>\n<\/ul>\n<p>VRM is free of charge for any number of installations and needs no additional hardware, software or subscription.<\/p>\n<h2>GX Touch display and local operation<\/h2>\n<p>The Cerbo GX can be extended with the optional <strong>GX Touch 50<\/strong> (5 inch) or <strong>GX Touch 70<\/strong> (7 inch) touch screen display. The displays give an instant overview of system status and allow settings to be adjusted directly on the screen. They are waterproof and simple to install; connection needs only one cable, so there is no need to bring many wires to the dashboard. The display is bolted onto the dashboard, which removes the need for perfect cut-outs.<\/p>\n<p>The power draw of the Cerbo GX with a GX Touch connected is 3.8 W @ 12 V with the backlight off and 4.8 W @ 12 V with the backlight at maximum. Local access is also possible through the VictronConnect app over Bluetooth or through a Multi Functional Display (MFD).<\/p>\n<h2>Integration into a Victron system<\/h2>\n<p>The Cerbo GX is intended for connecting Victron devices that communicate over VE.Bus (inverter\/chargers), VE.Direct (e.g. MPPT solar charge controllers) and VE.Can. Examples are operating inverter\/chargers, adjusting ESS settings, controlling EV charging stations and starting and stopping a generator. Batteries with CAN-bus communication are connected to the BMS-Can port, which is part of VE.Can, according to the documentation of the given battery.<\/p>\n<p>When planning a system, take into account the limit of 15 VE.Direct devices (including those connected over USB) and the limit on the number of connected PV inverters. If you need higher CPU performance, the manufacturer offers the Cerbo GX MK3 (BPP900451130), which supports up to 25 VE.Direct devices.<\/p>\n<h2>Mounting and dimensions<\/h2>\n<p>The Cerbo GX MK2 measures 78 \u00d7 154 \u00d7 48 mm (h \u00d7 w \u00d7 d) and has an IP20 rating, so it is intended for indoor use. The operating temperature is -20 to +50 \u00b0C. It is mounted on a wall or on a 35 mm DIN rail; DIN rail mounting requires the additional DIN35 adapter small accessory, which is not included.<\/p>\n<p>The supply is 8\u201370 V DC and the power draw without the GX Touch display is 2.8 W at 12 V. Installation and connection to the battery and other devices belong to a qualified electrician; detailed wiring is described in the manual for GX devices. As an optional accessory the manufacturer also offers a temperature sensor for Quattro, MultiPlus and GX devices such as the Cerbo GX.<\/p>\n<h2>Configuration and operation<\/h2>\n<p>The first connection and the network configuration can be done via Bluetooth and the VictronConnect app; the Cerbo GX has indicator LEDs for Wi-Fi and Bluetooth. The device can connect to a Wi-Fi network or to a network via Ethernet. Once online, the VRM portal provides monitoring, alerts and remote control.<\/p>\n<p>Without internet access the Remote Console can be used locally over the LAN or through the Cerbo GX Wi-Fi access point. Firmware updates can be carried out remotely, so most maintenance no longer requires a site visit. The behaviour of relay 2 and other functions depends on the firmware version; for details see the manufacturer&#8217;s documentation for GX devices (Venus OS).<\/p>\n<section class=\"tomo-ai-search-profile\">\n<h2>AI search description<\/h2>\n<p>The Victron Energy Cerbo GX MK2 (order code BPP900451100) is a GX communication centre for monitoring and controlling Victron systems. It has 3 VE.Direct ports (up to 15 VE.Direct devices in total), VE.Bus with two paralleled RJ45 sockets, VE.Can 1 and VE.Can 2 with BMS-Can, 3 USB ports, Ethernet, built-in Wi-Fi and Bluetooth. It offers 4 tank, 4 temperature and 4 digital inputs and 2 NO\/NC relays. Supply 8\u201370 V DC, dimensions 78 \u00d7 154 \u00d7 48 mm, IP20. Access through the VRM portal, the VictronConnect app or the optional GX Touch 50 or GX Touch 70 display. Wall or 35 mm DIN rail mounting with the DIN35 adapter small.<\/p>\n<p>Product page: <a href=\"https:\/\/batterado.com\/product\/victron-cerbo-gx-mk2\/\">https:\/\/batterado.com\/product\/victron-cerbo-gx-mk2\/<\/a><\/p>\n<\/section>\n","protected":false},"excerpt":{"rendered":"<p><strong>The Victron Energy Cerbo GX MK2 is a communication centre that joins Victron devices into one system and makes it accessible through the VRM portal, the VictronConnect app or the optional GX Touch display.<\/strong><\/p>\n<ul>\n<li>Ports: 3\u00d7 VE.Direct, VE.Bus (2 paralleled RJ45 sockets), VE.Can 1 and VE.Can 2 (including BMS-Can), 3\u00d7 USB, Ethernet, Wi-Fi and Bluetooth.<\/li>\n<li>Inputs and outputs: 4 tank, 4 temperature and 4 digital inputs, 2 NO\/NC relays.<\/li>\n<li>Supply 8\u201370 V DC, power draw without display 2.8 W at 12 V.<\/li>\n<li>Dimensions 78 \u00d7 154 \u00d7 48 mm, IP20, operating temperature -20 to +50 \u00b0C.<\/li>\n<\/ul>\n<p>The Cerbo GX MK2 (order code BPP900451100) can connect up to 15 VE.Direct devices, including devices connected over USB. It is mounted on a wall or on a 35 mm DIN rail using the DIN35 adapter small, which is not included.<\/p>\n","protected":false},"featured_media":60534,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[3882],"product_cat":[3615,3403],"product_tag":[3891,3889,3890],"class_list":["post-60533","product","type-product","status-publish","has-post-thumbnail","product_brand-victron-energy","product_cat-photovoltaic-accessories","product_cat-solar-panel-kits","product_tag-bpp900451100","product_tag-gx","product_tag-rizeni-energie","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product\/60533","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/comments?post=60533"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/media\/60534"}],"wp:attachment":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/media?parent=60533"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_brand?post=60533"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_cat?post=60533"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_tag?post=60533"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}