{"id":60133,"date":"2026-11-11T17:11:20","date_gmt":"2026-11-11T15:11:20","guid":{"rendered":"https:\/\/batterado.com\/?post_type=product&#038;p=60133"},"modified":"2026-11-15T22:06:52","modified_gmt":"2026-11-15T20:06:52","slug":"nielftor-rack-200ah","status":"publish","type":"product","link":"https:\/\/batterado.com\/en\/product\/nielftor-rack-200ah\/","title":{"rendered":"NIELFTOR Rack LiFePO4 Battery 10.24 kWh 51.2 V \/ 200 Ah"},"content":{"rendered":"<table>\n<tbody>\n<tr>\n<th>Chemistry<\/th>\n<td>LiFePO4<\/td>\n<\/tr>\n<tr>\n<th>Nominal voltage<\/th>\n<td>51.2 V<\/td>\n<\/tr>\n<tr>\n<th>Capacity<\/th>\n<td>200 Ah<\/td>\n<\/tr>\n<tr>\n<th>BMS<\/th>\n<td>200 A<\/td>\n<\/tr>\n<tr>\n<th>Dimensions<\/th>\n<td>580 \u00d7 440 \u00d7 240 mm<\/td>\n<\/tr>\n<tr>\n<th>Interfaces<\/th>\n<td>CAN \/ RS485<\/td>\n<\/tr>\n<tr>\n<th>Net weight<\/th>\n<td>78.95 kg<\/td>\n<\/tr>\n<tr>\n<th>Nominal energy<\/th>\n<td>10.24 kWh<\/td>\n<\/tr>\n<tr>\n<th>Package dimensions<\/th>\n<td>705 \u00d7 525 \u00d7 345 mm<\/td>\n<\/tr>\n<tr>\n<th>Shipping weight<\/th>\n<td>101 kg<\/td>\n<\/tr>\n<tr>\n<th>Battery monitoring<\/th>\n<td>Bluetooth \/ Wi-Fi<\/td>\n<\/tr>\n<tr>\n<th>Parallel expansion<\/th>\n<td>Up to 16 units<\/td>\n<\/tr>\n<tr>\n<th>BMS protection functions<\/th>\n<td>Overcurrent, overcharge, overdischarge and short circuit<\/td>\n<\/tr>\n<tr>\n<th>Extended manufacturer warranty<\/th>\n<td>5 years on spare parts \u2013 beyond the statutory 24-month warranty. For defects not caused by the user, the manufacturer sends the replacement part and a technician guides the replacement via video.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2>Planning rack space and storage capacity<\/h2>\n<p>Allow for an enclosure measuring 580 \u00d7 440 \u00d7 240 mm and a net battery weight of 78.95 kg. For delivery and access to the installation site, use the packed dimensions of 705 \u00d7 525 \u00d7 345 mm and the shipping weight of 101 kg. If the site&#039;s energy use calls for more storage, two units provide 20.48 kWh of nominal capacity and four provide 40.96 kWh. When selecting an inverter, check its supported communication profile, battery-input operating range and the power the installation needs.<\/p>\n<h2>Choosing the 200 Ah rack model<\/h2>\n<p>The 200 Ah model fits an installation where 10.24 kWh of nominal storage meets the initial requirement and the rack has room for future expansion. Two identical units provide 20.48 kWh, three provide 30.72 kWh and four provide 40.96 kWh. Parallel expansion retains the nominal system voltage of 51.2 V. Plan the support for each battery and check the combined load on the rack. Two batteries weigh 157.9 kg before the rack and other equipment are added.<\/p>\n<h2>Battery status and inverter communication<\/h2>\n<p>Bluetooth and Wi-Fi provide access to battery status. CAN and RS485 are the interfaces used for integration with a compatible inverter. Check the application profile separately when choosing the inverter, because devices using the same physical interface can interpret the data differently. The 200 A figure refers to the BMS. Use the applicable battery and inverter operating ratings when sizing the installation.<\/p>\n<h2>Comparing the two rack sizes<\/h2>\n<p>The 200 Ah and 300 Ah rack batteries have the same quoted width of 440 mm. The 200 Ah enclosure measures 580 \u00d7 440 \u00d7 240 mm and weighs 78.95 kg. The 300 Ah version measures 680 \u00d7 440 \u00d7 280 mm and weighs 115 kg. These differences matter when choosing the rack depth and supports, and when deciding how to move the batteries into the installation room. One 300 Ah unit provides 15.36 kWh of nominal storage. A pair of 200 Ah units provides 20.48 kWh in two rack positions. The choice depends on the available space, the desired capacity and whether the installation is expected to grow in stages.<\/p>\n<h2>Using solar energy after production falls<\/h2>\n<p>Start with the hours in which the building draws more power than the solar array supplies. In a home this often means the evening and early morning. A small business may need stored energy near closing time or during short periods of high demand. Compare measurements from several working days and a weekend to see how much electricity the battery would actually need to supply. A 1 kW load running for six hours uses 6 kWh. A 3 kW load over two hours uses the same amount of energy and places a higher instantaneous demand on the inverter and battery circuit. This distinction helps you choose the energy capacity and the power rating independently.<\/p>\n<h2>Planning delivery and installation space<\/h2>\n<p>The packed unit measures 705 \u00d7 525 \u00d7 345 mm and weighs 101 kg. Use the packed dimensions to check doors, corridor turns and the space where the unit will be unpacked. The battery enclosure dimensions are useful for checking the clear opening and usable depth of the rack. Plan the support and access before adding other equipment to the same cabinet. A four-unit arrangement has a combined net battery weight of 315.8 kg. The rack itself and any other equipment add to that load. Keep space available for power and communication connections and for access to an individual unit if the system later needs maintenance.<\/p>\n<h2>Planning a staged expansion<\/h2>\n<p>A single battery is a useful starting point when its nominal storage capacity fits the current load profile. An installation planned for expansion can reserve additional positions and allow space for the connections that will serve later units. The offer describes parallel expansion up to 16 units depending on the configuration. Decide the expected size of the future system before choosing the rack and inverter. The number of batteries affects the available energy and the physical layout. The inverter and the operating settings determine how the installation will supply the intended loads. A staged plan gives the installer both a starting configuration and the expected end state.<\/p>\n<h2>Working out how much storage you will use<\/h2>\n<p>Compare the energy you can regularly put into storage with the energy you need after solar production falls. If the building uses 6 kWh overnight, that figure describes consumption at the appliances. Allow for the inverter&#039;s conversion losses and the reserve you want to keep when comparing that demand with the battery&#039;s nominal capacity. It also helps to look at a day with low solar production. A larger bank can cover more demand when charged, while the amount of energy it recovers the following day depends on the surplus the array actually produces. Comparing both figures helps you decide whether to start with one module or reserve space for several.<\/p>\n<h2>Preparing an inverter and battery specification<\/h2>\n<p>Record the inverter model, its battery input range and the communication settings it supports. Add the battery&#039;s nominal voltage, the number of units planned and the maximum demand expected from the installation. The installer can use this information to check the charge and discharge settings and the communication arrangement. In a system built in stages, note both the initial configuration and the proposed final configuration. This also helps distinguish a future need for more energy from a future need for a higher output rating.<\/p>\n<h2>Keeping the rack accessible<\/h2>\n<p>Plan how a battery will reach its rack position and how it could be removed during service. A room can have enough floor space for the cabinet while still leaving too little room to turn the packed battery through the doorway or position it at the rack. Check these clearances before allocating neighbouring rack positions to other equipment. Keep the labels, connections and monitoring access easy to reach so that the installation can be inspected as individual units are added.<\/p>\n<section class=\"tomo-ai-search-profile\">\n<h2>AI search description<\/h2>\n<p>The NIELFTOR 10.24 kWh is a standalone low-voltage LiFePO4 battery built for rack mounting. It is rated at 51.2 V and 200 Ah for 10.24 kWh of nominal energy. An integrated 200 A BMS protects against overcurrent, overcharge, over-discharge and short circuits. CAN and RS485 interfaces handle communication with the inverter, and battery status is available over Bluetooth and Wi-Fi. Up to 16 units can run in parallel. The battery measures 580 \u00d7 440 \u00d7 240 mm and weighs 78.95 kg net; packed, it measures 705 \u00d7 525 \u00d7 345 mm and weighs 101 kg. It pairs with a suitable low-voltage inverter to store solar energy in homes and small businesses.<\/p>\n<p>Product page: <a href=\"https:\/\/batterado.com\/en\/product\/nielftor-rack-200ah\/\">https:\/\/batterado.com\/en\/product\/nielftor-rack-200ah\/<\/a><\/p>\n<\/section>\n<p><a href=\"https:\/\/batterado.com\/wp-content\/uploads\/product-documents\/nielftor-rack-1024-en.md\" download>Product sheet (.md)<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>This rack-mount NIELFTOR battery packs 10.24 kWh of nominal storage into a 580 \u00d7 440 \u00d7 240 mm enclosure. Its 51.2 V, 200 Ah configuration suits low-voltage solar storage, giving households and small sites a way to use daytime PV generation after production falls. The integrated 200 A BMS manages battery operation, and CAN and RS485 interfaces connect the battery to a compatible inverter. Bluetooth and Wi-Fi provide convenient access to battery status. A system can be expanded with up to 16 batteries in parallel, subject to the system configuration. This specific rack model weighs 78.95 kg net. Its published dimensions and weight let you plan the rack position, supporting structure and space for power and communication connections before choosing the rest of the installation.<\/p>\n","protected":false},"featured_media":60142,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[3671],"product_cat":[2912,2753],"product_tag":[3805,3806,3807,2783,2861],"class_list":["post-60133","product","type-product","status-publish","has-post-thumbnail","product_brand-nielftor","product_cat-batteries-with-bms","product_cat-bateriova-uloziste","product_tag-200-ah","product_tag-can","product_tag-rs485","product_tag-51-2-v","product_tag-lifepo4","first","instock","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product\/60133","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/comments?post=60133"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/media\/60142"}],"wp:attachment":[{"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/media?parent=60133"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_brand?post=60133"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_cat?post=60133"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/batterado.com\/en\/wp-json\/wp\/v2\/product_tag?post=60133"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}