Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Felicity Solar T-REX-5KLP1G01 Single-Phase Hybrid Inverter 5 kW, Low-Voltage Battery 40–60 V

31 962 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

5 kW single-phase hybrid inverter for a low-voltage (48 V) battery: the Felicity Solar T-REX-5KLP1G01 has two MPP trackers, a 100 A battery current, a 5 kW back-up output and IP65 protection.

  • Up to 6,500 W of PV power (3,500 W per input), PV voltage up to 550 V.
  • Battery 40–60 V, charge and discharge current 100 A, power up to 5,000 W.
  • Back-up output 5,000 VA / 5,000 W, single-phase 230 V.
  • Battery communication via CAN or RS485, Wi-Fi/GPRS monitoring, LCD and LED display.
  • Natural cooling without a fan, wall mounting, 10-year manufacturer warranty.

The inverter is designed for single-phase homes and smaller businesses where solar panels are combined with a low-voltage battery storage and back-up power. EN 50549-1 and VDE-AR-N 4105 certificates are available for the model. Before choosing a battery, compare its voltage range and communication protocol with the inverter datasheet.

In stock

Enquiry

Description

Technical data

BrandFelicity Solar
ModelT-REX-5KLP1G01
TypeHybrid inverter, single-phase
Battery voltage classLow voltage (LV), 40–60 V
Rated AC power (grid and back-up)5,000 W
PV: max. recommended power6,500 W (3,500 W per input)
PV: max. voltage550 V
PV: start voltage130 V
PV: voltage range90–550 V
PV: MPPT range100–500 V
PV: MPPT range at full load220–500 V
PV: nominal voltage360 V
PV: max. input current15 A / 15 A
PV: max. short-circuit current18 A / 18 A
PV: number of MPP trackers / strings per tracker2 / 1
Battery: typeLi-Ion / lead-acid
Battery: voltage range40–60 V
Battery: max. charge / discharge current100 A / 100 A
Battery: max. charge / discharge power5,000 W
Grid: nominal voltage230 V AC
Grid: nominal frequency50/60 Hz
Grid: max. input current40 A
Grid: max. charge current100 A
Grid: max. AC output power5,000 W
Grid: rated AC output current21.7 A
Grid: max. output current25 A
Grid: max. AC pass-through current40 A
Grid: power factor> 0.99
Grid: THDI< 3 %
Back-up: rated power5,000 VA / 5,000 W
Back-up: max. output current30 A
Back-up: nominal output voltage230 V AC
CommunicationRS232 / RS485
Monitoring moduleWi-Fi / GPRS
DisplayLCD + LED
Battery communication (BMS) / CANyes, BMS interface of the inverter
Battery communication (BMS) / RS485yes, BMS interface of the inverter
Felicity LV batteries / RS485per the manufacturer list of compatible brands
Coolingnatural (fanless)
Ingress protectionIP65
Operating temperature−25 to +60 °C
Installationwall-mounted
Dimensions (L × W × H)530 × 493 × 228 mm
Net weight32.4 kg
Gross weight39.1 kg
Package dimensions632 × 570 × 315 mm
EN 50549-1 certificationTÜV Rheinland LGA, No. AK 50622709 0001, dated 20 March 2024 (type A, EU Regulation 2016/631); covers T-REX-4K6LP1G01 and T-REX-5KLP1G01
VDE-AR-N 4105 certificationTÜV Rheinland LGA, No. A3 50626513 0001, dated 15 May 2024; covers T-REX-4K6LP1G01 and T-REX-5KLP1G01
Manufacturer warranty10 years under the Felicity Solar warranty policy

Hybrid inverter 5 kW for a single-phase home

The Felicity Solar T-REX-5KLP1G01 is a single-phase hybrid inverter that combines three roles in one housing: it converts the direct current from solar panels to alternating current, manages charging and discharging of the battery storage, and supplies a back-up circuit when the grid fails. The rated AC power is 5,000 W at 230 V and 50/60 Hz.

The LP designation in the model name means the inverter is built for a low-voltage battery. The battery input works in the 40–60 V range, so 48 V battery modules are connected. The datasheet lists Li-Ion and lead-acid as the supported battery types.

The inverter suits family homes and smaller businesses with a single-phase connection where the aim is to use self-generated solar power, store surplus energy and have back-up power. It is wall-mounted, has IP65 protection, natural cooling without a fan and an LCD with LED indicators.

PV input: two MPP trackers and voltage up to 550 V

The inverter has two independent MPP trackers, each with one string. The maximum recommended power of the PV array is 6,500 W, of which no more than 3,500 W per input. The maximum input voltage is 550 V, the start voltage 130 V and the PV voltage range 90–550 V.

The maximum power point tracking (MPPT) range is 100–500 V; at full load it works within a string voltage of 220–500 V. The nominal voltage is 360 V. Each input handles a current of 15 A and a short-circuit current of 18 A.

The maximum PV input voltage is 550 V. Two trackers make it possible to connect two roof surfaces with different orientation or tilt.

Battery input 40–60 V and 100 A current

The battery input works in the 40–60 V range. The maximum charge and discharge current is 100 A and the maximum charge and discharge power is 5,000 W. The datasheet lists Li-Ion and lead-acid as the battery types.

The battery can be charged from the grid with a current of up to 100 A.

Scheduled charging and discharging is set on the inverter. Its behaviour towards the battery is governed by the communication with the battery management system (BMS), described in the section on choosing a battery and communication below.

Grid, back-up output and electrical parameters

On the grid side the inverter works at 230 V and 50/60 Hz. The maximum input current from the grid is 40 A, the maximum AC output power 5,000 W, the rated output current 21.7 A and the maximum output current 25 A. The power factor is above 0.99 and the current distortion THDI is below 3 %.

The back-up output delivers a rated power of 5,000 VA / 5,000 W at 230 V, and the maximum output current is 30 A. The maximum AC pass-through current, that is the current allowed to flow through the inverter from the grid to the household, is 40 A.

The datasheet is shared by the 5K and 6K models of the series; the card uses the values from the 5K column.

Communication and monitoring

According to the datasheet the inverter communicates via RS232 / RS485. Communication with the battery management system (BMS) runs over CAN or RS485. A Wi-Fi / GPRS module is used for monitoring, allowing remote supervision of the inverter. The LCD with LED indicators allows basic settings and status checks directly on the inverter.

How to choose a battery and communication

The T-REX-5KLP1G01 belongs to the low-voltage class and works with batteries with a nominal voltage in the 40–60 V range, typically 48 V battery modules. Designed for low-voltage batteries of 40–60 V.

Communication matters. According to the manufacturer the inverter has a BMS interface with CAN or RS485. In the manufacturer list of compatible inverter brands, the Felicity low-voltage batteries are listed with the RS485 protocol. The inverter can deliver up to 100 A.

Compatible with the Felicity low-voltage battery range (RS485).

At the rated power of 5,000 W and 48 V, a current of around 100 A flows through the battery cables.

Certifications, protections and environment

Two TÜV Rheinland LGA certificates are available for the T-REX-5KLP1G01, covering the models T-REX-4K6LP1G01 and T-REX-5KLP1G01: EN 50549-1 (No. AK 50622709 0001 of 20 March 2024, requirements for a type A generating unit under EU Regulation 2016/631, report CN22D6DC 001) and VDE-AR-N 4105 (No. A3 50626513 0001 of 15 May 2024, report CN24F47X 001).

The operating temperature is −25 to +60 °C. Passive cooling without a fan ensures quiet operation. IP65 means protection against dust and water jets, so the inverter can also be installed outdoors in a spot sheltered from direct sun and extreme weather.

Construction and installation

The inverter is wall-mounted. Its dimensions are 530 × 493 × 228 mm, net weight 32.4 kg, gross weight 39.1 kg and package dimensions 632 × 570 × 315 mm. The weight values come from the datasheet shared by the 5K and 6K models.

Plan for a load-bearing wall and enough free space around the inverter for heat dissipation.

The manufacturer provides a 10-year warranty under the Felicity Solar warranty policy.

AI search description

The Felicity Solar T-REX-5KLP1G01 is a 5 kW single-phase hybrid inverter from the T-Rex series for low-voltage batteries of 40–60 V. The battery input has a charge and discharge current of 100 A and a power of 5,000 W. PV input: 2 MPP trackers, up to 6,500 W, 90–550 V, MPPT 100–500 V. Grid and back-up output 230 V, 5,000 W. Battery communication via CAN or RS485, Wi-Fi/GPRS monitoring, LCD and LED display. IP65, natural cooling, wall mounting. EN 50549-1 and VDE-AR-N 4105 certificates (TÜV Rheinland). 10-year manufacturer warranty.

Product page: https://batterado.com/product/felicity-t-rex-5klp1g01/

Additional information

Weight32,4 kg
Dimensions53,0 × 49,3 × 22,8 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop