Store energy. Every way.™

Helping with technology for more than 25 years.More than 25 years on the market

Felicity Solar T-REX-50KHP3G01 Three-Phase Hybrid Inverter 50 kW, High-Voltage Battery 160–800 V

131 105 Kč incl. VAT

Seller: Tomorrow Systems® s.r.o.

50 kW three-phase hybrid inverter for a high-voltage battery: the Felicity Solar T-REX-50KHP3G01 has four MPP trackers with eight strings, a 160–800 V battery input and IP65 protection.

  • Up to 65 kW of PV power, PV voltage up to 1,000 V, 4 MPPT × 2 strings.
  • Rated AC power 50 kW (max. 55 kW), 220/380 or 230/400 V.
  • LFP battery 160–800 V, two battery inputs, current 50 + 50 A.
  • Max. efficiency 97.6 %, European efficiency 97.0 %, MPPT efficiency 99.9 %.
  • Battery communication RS485 / CAN, Wi-Fi/GPRS monitoring, wall mounting, 10-year warranty.

The inverter is intended for larger commercial and industrial roofs and smaller solar plants with storage, where a high-voltage battery storage is combined with a PV array and self-consumption. A CE-EMC certificate is available for the model.

In stock

Enquiry

Description

Technical data

BrandFelicity Solar
ModelT-REX-50KHP3G01
TypeHybrid inverter, three-phase
Battery voltage classHigh voltage (HV), 160–800 V
Rated AC power50,000 W
Max. AC power55,000 W
PV: max. power65,000 W
PV: max. voltage1,000 V
PV: min. voltage150 V
PV: start voltage250 V
PV: nominal voltage600 V
PV: MPPT range200–850 V
PV: MPPT range at full load450–850 V
PV: max. input current per MPPT36 A × 4
PV: max. short-circuit current per MPPT55 A × 4
PV: number of MPP trackers / strings per tracker4 / 2
Battery: typeLFP (lithium iron phosphate)
Battery: voltage range160–800 V
Battery: number of inputs2
Battery: max. charge / discharge current50 A + 50 A
Grid: nominal voltage220/380 V or 230/400 V AC (−20 % to +15 %)
Grid: connection3W+N+PE / 3W+PE
Grid: nominal frequency50/60 Hz (range 45–55 Hz / 55–65 Hz)
Grid: rated AC output current72.5 A
Grid: max. AC output current79.7 A
Grid: displacement power factor0.8 (leading) to 0.8 (lagging)
Grid: THDI< 3 %
Efficiency: maximum97.6 %
Efficiency: European (Euro)97.0 %
Efficiency: MPPT99.9 %
Protections (integrated)PV surge protection, string reverse polarity, battery surge protection, battery reverse polarity, insulation resistance, RCMU, overcurrent, short circuit, overvoltage, anti-islanding, AC surge protection
Battery communication (BMS) / RS485yes
Battery communication (BMS) / CANyes
Monitoring moduleWi-Fi / GPRS
Felicity HV batteries / RS485 (RJ45 cable)the model is listed in the manufacturer list of Felicity HV batteries
CoolingSmart cooling
Ingress protectionIP65
Operating temperature−25 to +60 °C (derating above 50 °C)
Relative humidity0–95 %
Max. altitude3,000 m (derating above 2,000 m)
Installationwall-mounted
Dimensions (L × W × H)940 × 340 × 582 mm
Net weight85.6 kg
Gross weight98.4 kg
Package dimensions463 × 770 × 1,110 mm
CE-EMC certificationAnbotek, No. AT18360EC300190, dated 19 April 2024 (EN IEC 61000-6-4, 61000-3-12, 61000-3-11, 61000-6-2); covers the 25–50K series
Manufacturer warranty10 years under the Felicity Solar warranty policy

Hybrid inverter 50 kW for high-voltage storage

The Felicity Solar T-REX-50KHP3G01 is a three-phase hybrid inverter with a rated AC power of 50 kW, 55 kW at maximum. In one housing it converts solar energy to alternating current, manages charging and discharging of a high-voltage battery and supplies the grid and loads. The grid works at 220/380 or 230/400 V (within −20 % to +15 %) and 50/60 Hz, with a 3W+N+PE or 3W+PE connection.

The HP designation in the model name means a high-voltage battery. The battery input works in the 160–800 V range and the datasheet lists LFP (lithium iron phosphate) as the battery type. At the same power, high voltage means a much lower current than in 48 V systems and therefore thinner cabling.

The inverter is wall-mounted, has IP65 protection and is intended for larger roofs of commercial and industrial buildings and smaller solar plants where surplus energy is to be stored and self-consumption increased.

PV input: four MPP trackers and voltage up to 1,000 V

The inverter has four independent MPP trackers, each with two strings, eight strings in total. The maximum power of the PV array is 65 kW. The maximum input voltage is 1,000 V, the minimum 150 V, the start voltage 250 V and the nominal voltage 600 V.

The MPPT range is 200–850 V, 450–850 V at full load. The maximum input current is 36 A on each of the four trackers, the short-circuit current 55 A per tracker. According to the datasheet the maximum power point tracking (MPPT) efficiency is 99.9 %.

Four trackers make it possible to divide the array between several roof surfaces with different orientation, tilt or shading.

Battery input 160–800 V with two inputs

The battery input works in the 160–800 V range. The inverter has two battery inputs, each with a charge and discharge current of 50 A, so 50 A + 50 A in total. The datasheet lists LFP as the battery type.

Two inputs make it possible to connect two separate strings of battery modules.

Scheduled charging and discharging is set on the inverter, and its behaviour towards the battery is governed by the communication with the battery management system (BMS) described below.

Grid, efficiency and protections

The rated AC output current is 72.5 A and the maximum 79.7 A. The displacement power factor can be set from 0.8 leading to 0.8 lagging and the current distortion THDI is below 3 %. The frequency range is 45–55 Hz at 50 Hz and 55–65 Hz at 60 Hz.

According to the datasheet the maximum efficiency is 97.6 %, the European (Euro) efficiency 97.0 % and the MPPT efficiency 99.9 %.

The inverter has integrated protections: surge protection on the PV side, string reverse polarity protection, surge protection on the battery side, battery reverse polarity protection, insulation resistance monitoring, RCMU (residual current monitoring), protection against overcurrent, short circuit and overvoltage, anti-islanding and surge protection on the AC side.

Communication and monitoring

Communication with the battery management system (BMS) runs over RS485 or CAN. A Wi-Fi / GPRS module is used for monitoring, allowing remote supervision of the inverter.

How to choose a battery and communication

The T-REX-50KHP3G01 belongs to the high-voltage class and works with batteries whose voltage lies in the 160–800 V range. The inverter is designed for high-voltage batteries. The datasheet lists LFP as the battery type.

Communication matters. The inverter communicates with the battery management over RS485 or CAN. In the list of Felicity high-voltage batteries published by the manufacturer, the T-REX-50KHP3G01 is listed with the RS485 protocol and an RJ45 cable.

General compatibility covers the Felicity high-voltage battery range (RS485).

Certifications and environment

For the T-REX-50KHP3G01 a CE-EMC certificate from Anbotek No. AT18360EC300190 dated 19 April 2024 is available, based on EN IEC 61000-6-4, EN IEC 61000-3-12, EN IEC 61000-3-11 and EN IEC 61000-6-2. The certificate covers the whole 25–50K series.

The manufacturer datasheet lists declared conformity with grid codes and a safety standard. The specific conditions of connection to the distribution grid in the Czech Republic are determined by the distribution system operator.

The operating temperature is −25 to +60 °C; above 50 °C the inverter reduces its output. Relative humidity is 0–95 %. The maximum altitude is 3,000 m, with derating above 2,000 m. Cooling is intelligent (Smart cooling). IP65 means protection against dust and water jets.

Construction and installation

The inverter is mounted on a wall with a wall bracket. Its dimensions are 940 × 340 × 582 mm, net weight 85.6 kg, gross weight 98.4 kg and package dimensions 463 × 770 × 1,110 mm. Given the weight, plan for a solid load-bearing wall and two people for handling.

Leave enough free space around the inverter for heat dissipation.

The manufacturer provides a 10-year warranty under the Felicity Solar warranty policy.

AI search description

The Felicity Solar T-REX-50KHP3G01 is a 50 kW (max. 55 kW) three-phase hybrid inverter for 160–800 V high-voltage LFP batteries with two battery inputs of 50 + 50 A. PV input: 4 MPP trackers × 2 strings, up to 65 kW, 1,000 V, MPPT 200–850 V. Grid 220/380 or 230/400 V. Max. efficiency 97.6 %, Euro 97.0 %, MPPT 99.9 %. Battery communication via RS485 or CAN, Wi-Fi/GPRS monitoring. IP65, wall mounting, 85.6 kg. CE-EMC certificate (Anbotek). 10-year manufacturer warranty.

Product page: https://batterado.com/product/felicity-t-rex-50khp3g01/

Additional information

Weight85,6 kg
Dimensions94,0 × 34,0 × 58,2 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
0
Your Cart
Your cart is emptyReturn to Shop