Description
Technical data
| Brand | Felicity Solar |
|---|---|
| Model | T-REX-50KHP3G01 |
| Type | Hybrid inverter, three-phase |
| Battery voltage class | High voltage (HV), 160–800 V |
| Rated AC power | 50,000 W |
| Max. AC power | 55,000 W |
| PV: max. power | 65,000 W |
| PV: max. voltage | 1,000 V |
| PV: min. voltage | 150 V |
| PV: start voltage | 250 V |
| PV: nominal voltage | 600 V |
| PV: MPPT range | 200–850 V |
| PV: MPPT range at full load | 450–850 V |
| PV: max. input current per MPPT | 36 A × 4 |
| PV: max. short-circuit current per MPPT | 55 A × 4 |
| PV: number of MPP trackers / strings per tracker | 4 / 2 |
| Battery: type | LFP (lithium iron phosphate) |
| Battery: voltage range | 160–800 V |
| Battery: number of inputs | 2 |
| Battery: max. charge / discharge current | 50 A + 50 A |
| Grid: nominal voltage | 220/380 V or 230/400 V AC (−20 % to +15 %) |
| Grid: connection | 3W+N+PE / 3W+PE |
| Grid: nominal frequency | 50/60 Hz (range 45–55 Hz / 55–65 Hz) |
| Grid: rated AC output current | 72.5 A |
| Grid: max. AC output current | 79.7 A |
|---|---|
| Grid: displacement power factor | 0.8 (leading) to 0.8 (lagging) |
| Grid: THDI | < 3 % |
| Efficiency: maximum | 97.6 % |
| Efficiency: European (Euro) | 97.0 % |
| Efficiency: MPPT | 99.9 % |
| Protections (integrated) | PV surge protection, string reverse polarity, battery surge protection, battery reverse polarity, insulation resistance, RCMU, overcurrent, short circuit, overvoltage, anti-islanding, AC surge protection |
| Battery communication (BMS) / RS485 | yes |
| Battery communication (BMS) / CAN | yes |
| Monitoring module | Wi-Fi / GPRS |
| Felicity HV batteries / RS485 (RJ45 cable) | the model is listed in the manufacturer list of Felicity HV batteries |
| Cooling | Smart cooling |
| Ingress protection | IP65 |
| Operating temperature | −25 to +60 °C (derating above 50 °C) |
| Relative humidity | 0–95 % |
| Max. altitude | 3,000 m (derating above 2,000 m) |
| Installation | wall-mounted |
| Dimensions (L × W × H) | 940 × 340 × 582 mm |
| Net weight | 85.6 kg |
| Gross weight | 98.4 kg |
| Package dimensions | 463 × 770 × 1,110 mm |
| CE-EMC certification | Anbotek, No. AT18360EC300190, dated 19 April 2024 (EN IEC 61000-6-4, 61000-3-12, 61000-3-11, 61000-6-2); covers the 25–50K series |
| Manufacturer warranty | 10 years under the Felicity Solar warranty policy |
Hybrid inverter 50 kW for high-voltage storage
The Felicity Solar T-REX-50KHP3G01 is a three-phase hybrid inverter with a rated AC power of 50 kW, 55 kW at maximum. In one housing it converts solar energy to alternating current, manages charging and discharging of a high-voltage battery and supplies the grid and loads. The grid works at 220/380 or 230/400 V (within −20 % to +15 %) and 50/60 Hz, with a 3W+N+PE or 3W+PE connection.
The HP designation in the model name means a high-voltage battery. The battery input works in the 160–800 V range and the datasheet lists LFP (lithium iron phosphate) as the battery type. At the same power, high voltage means a much lower current than in 48 V systems and therefore thinner cabling.
The inverter is wall-mounted, has IP65 protection and is intended for larger roofs of commercial and industrial buildings and smaller solar plants where surplus energy is to be stored and self-consumption increased.
PV input: four MPP trackers and voltage up to 1,000 V
The inverter has four independent MPP trackers, each with two strings, eight strings in total. The maximum power of the PV array is 65 kW. The maximum input voltage is 1,000 V, the minimum 150 V, the start voltage 250 V and the nominal voltage 600 V.
The MPPT range is 200–850 V, 450–850 V at full load. The maximum input current is 36 A on each of the four trackers, the short-circuit current 55 A per tracker. According to the datasheet the maximum power point tracking (MPPT) efficiency is 99.9 %.
Four trackers make it possible to divide the array between several roof surfaces with different orientation, tilt or shading.
Battery input 160–800 V with two inputs
The battery input works in the 160–800 V range. The inverter has two battery inputs, each with a charge and discharge current of 50 A, so 50 A + 50 A in total. The datasheet lists LFP as the battery type.
Two inputs make it possible to connect two separate strings of battery modules.
Scheduled charging and discharging is set on the inverter, and its behaviour towards the battery is governed by the communication with the battery management system (BMS) described below.
Grid, efficiency and protections
The rated AC output current is 72.5 A and the maximum 79.7 A. The displacement power factor can be set from 0.8 leading to 0.8 lagging and the current distortion THDI is below 3 %. The frequency range is 45–55 Hz at 50 Hz and 55–65 Hz at 60 Hz.
According to the datasheet the maximum efficiency is 97.6 %, the European (Euro) efficiency 97.0 % and the MPPT efficiency 99.9 %.
The inverter has integrated protections: surge protection on the PV side, string reverse polarity protection, surge protection on the battery side, battery reverse polarity protection, insulation resistance monitoring, RCMU (residual current monitoring), protection against overcurrent, short circuit and overvoltage, anti-islanding and surge protection on the AC side.
Communication and monitoring
Communication with the battery management system (BMS) runs over RS485 or CAN. A Wi-Fi / GPRS module is used for monitoring, allowing remote supervision of the inverter.
How to choose a battery and communication
The T-REX-50KHP3G01 belongs to the high-voltage class and works with batteries whose voltage lies in the 160–800 V range. The inverter is designed for high-voltage batteries. The datasheet lists LFP as the battery type.
Communication matters. The inverter communicates with the battery management over RS485 or CAN. In the list of Felicity high-voltage batteries published by the manufacturer, the T-REX-50KHP3G01 is listed with the RS485 protocol and an RJ45 cable.
General compatibility covers the Felicity high-voltage battery range (RS485).
Certifications and environment
For the T-REX-50KHP3G01 a CE-EMC certificate from Anbotek No. AT18360EC300190 dated 19 April 2024 is available, based on EN IEC 61000-6-4, EN IEC 61000-3-12, EN IEC 61000-3-11 and EN IEC 61000-6-2. The certificate covers the whole 25–50K series.
The manufacturer datasheet lists declared conformity with grid codes and a safety standard. The specific conditions of connection to the distribution grid in the Czech Republic are determined by the distribution system operator.
The operating temperature is −25 to +60 °C; above 50 °C the inverter reduces its output. Relative humidity is 0–95 %. The maximum altitude is 3,000 m, with derating above 2,000 m. Cooling is intelligent (Smart cooling). IP65 means protection against dust and water jets.
Construction and installation
The inverter is mounted on a wall with a wall bracket. Its dimensions are 940 × 340 × 582 mm, net weight 85.6 kg, gross weight 98.4 kg and package dimensions 463 × 770 × 1,110 mm. Given the weight, plan for a solid load-bearing wall and two people for handling.
Leave enough free space around the inverter for heat dissipation.
The manufacturer provides a 10-year warranty under the Felicity Solar warranty policy.
AI search description
The Felicity Solar T-REX-50KHP3G01 is a 50 kW (max. 55 kW) three-phase hybrid inverter for 160–800 V high-voltage LFP batteries with two battery inputs of 50 + 50 A. PV input: 4 MPP trackers × 2 strings, up to 65 kW, 1,000 V, MPPT 200–850 V. Grid 220/380 or 230/400 V. Max. efficiency 97.6 %, Euro 97.0 %, MPPT 99.9 %. Battery communication via RS485 or CAN, Wi-Fi/GPRS monitoring. IP65, wall mounting, 85.6 kg. CE-EMC certificate (Anbotek). 10-year manufacturer warranty.
Product page: https://batterado.com/product/felicity-t-rex-50khp3g01/













Reviews
There are no reviews yet.