Solis EverCore 261 — 261.248 kWh storage with 125 kW inverter

AI search description

Solis EverCore 261 — 261.248 kWh storage with 125 kW inverter. The 261 kWh variant contains 13 battery packs with 261.248 kWh total nominal energy, battery management, EMU, PDU and an air-conditioning system. This offer also includes the specific S6-EH3P125K10-NV-YD-H inverter. Cabinet and inverter form a system for professional interconnection at the prepared site. Paired with the matching S6-EH3P125K10-NV-YD-H hybrid inverter, the cabinet supports direct PV charging through MPPTs, configured grid charging and supply to designated backup circuits. Self-use, selling-first and off-grid modes are selected according to site design. PV serves loads first; scheduling, SOC reserve and peak management align storage with business operation. Each proposed system is assessed for simultaneous demand, starting loads, phase distribution and required backup duration.

Manufacturer: Ginlong Energy Storage /SolisStorage; Family: EverCore; Variant: 261 kWh; Device type: Battery storage system with inverter; Nominal energy: 261.248 kWh; Cell chemistry: LiFePO4 /LFP; Cells: EVE MB31; Nominal cell voltage: 3.2 V; Cell capacity: 314 Ah; Battery pack count: 13; Pack model: PACK-1P20S-314-01; Pack configuration: 1P20S; Pack energy per manual: 20.10 kWh; Pack voltage: 64 V; Pack voltage range: 58–72 V; Pack weight: 138 kg; Pack dimensions W ×H ×D: 435 ×230 ×904 mm; Battery configuration: 1P260S; Total cell count: 260; Nominal DC voltage: 832 V; Operating DC voltage: 754–936 V; Rated DC current: 157 A; Cycle rate: 0.5 P; Maximum battery charge power: 125 kW; Maximum battery discharge power: 125 kW; Actual power calculation: Voltage ×current, BMS, SOC, temperature and connected inverter; Usable energy: According to SOC settings, reserve and operating losses; Battery management: BMU /BCU /EMU; Cell balancing: Passive; Communication protocols: CAN /RS485 /TCP/IP; Battery-inverter communication: CAN /BMS1; Cabinet controller: EMU; Power distribution: PDU; Cabinet cooling: Industrial air conditioning; Thermal modes: Cooling, heating, dehumidification and air circulation; Air-conditioner cooling capacity: 5 kW; Air-conditioner heating capacity: 3 kW; Refrigerant: R134a; Pack cooling: Air cooling; Auxiliary AC supply: 220 V AC; Auxiliary supply rating: ~4 kW; Charging ambient temperature: 0…+55 °C; Discharging ambient temperature: −25…+55 °C; Cabinet storage temperature per manual: −20…+45 °C; Operating humidity: ≤95 % non-condensing; Cabinet ingress protection: IP55; Quoted anti-corrosion configuration: C4H+C5 /C5; Family noise at rated operation: 75 dB(A) @1 m; Cabinet dimensions W ×H ×D: 1400 ×2230 ×1600 mm; Reference battery-cabinet weight: 2900 kg; Siting: Fixed outdoor location according to site design; Foundation: Level non-combustible foundation sized for the actual system; Handling: Professional lifting or forklift equipment; Protection sensing: Temperature and smoke; Pack protection: Aerosol system; Pressure relief: Pressure-relief valve; Indication: Audible and visual; Fire-water connection: DN65; Fire-linkage output: XT3:1 /XT3:2; Safety equipment configuration: Aerosol, temperature and smoke detection, pressure valve, visual and audible indication; Cell cycle test: 8000; 25±2 °C; 0.5 P; SOH70 %; Cycle-value applicability: Cell-manufacturer data under test conditions; Estimated delivery: 2–3 days, seller operating estimate; Installation arrangement: Engineered connection by qualified personnel; Inverter pairing: S6-EH3P125K10-NV-YD-H included in system.

Grid charging: Through the supplied hybrid inverter according to settings and design; PV connection: To MPPTs of the matching hybrid inverter; Battery-bank setting: 1; DC port connection: Two inverter ports to one bank according to EverCore diagram; Battery model in app: SolisStorage; DC expansion: Additional matching cabinets through busbars according to design; Linked-cabinet control: EMU CAN /Cat6a STP /T568B; Controller network: WAN1 /Ethernet /TCP/IP; Cabinet-count configuration: According to actually connected cabinets; Monitoring: SolisCloud and local EMU; Commissioning: Installer role, verification of wiring, grid, BMS and SOC; Inverter — Rated AC output: 125000 W; Inverter — Grid connection: 3/N/PE; 220/380 V; 230/400 V; Inverter — Grid frequency: 50 /60 Hz; Inverter — Power factor: >0.99; 0.8 leading /lagging; Inverter — THDi: <3 %; Inverter — Keys: ESC /UP /DOWN /ENTER; Inverter — Status LEDs: POWER /OPERATION /ALARM; Inverter — App roles: Installer /Owner; Inverter — Operating modes: Self Use /Selling First /Off Grid /Peak Shaving; Inverter — Grid charging: Allow Grid Charging; Inverter — Time scheduling: 6 charging and 6 discharging windows; Inverter — Default maximum charge: 100 % SOC; Inverter — SOC setting order: Force Charge <Over-discharge <Recovery; Inverter — Smart port — function selection: Genset input /AC coupled /Smart load output; Inverter — PV conductors: 4–6 mm²; recommended 4 mm²; Inverter — PV stripping: 7 ±0.5 mm; Inverter — Ingress protection: IP66; Inverter — Operating temperature: −25…+60 °C; Inverter — Operating humidity: 0–100 % RH; Inverter — Bluetooth: BDR /EDR /BLE; 2.402–2.480 GHz; 8 dBm; Inverter — App sections: Home /Info /Alarm /Settings; Inverter — Operating information: PV /Battery /Grid /Load /Inverter; SOC /SOH; energy history and generator yield; Inverter — Diagnostics: Current and historical alarms; Inverter — Initial settings: Time, CT/meter, grid code, operating mode and battery banks; Inverter — Over-discharge SOC: 5–40 %; default 20 %; Inverter — Force-charge SOC: From 4% to selected over-discharge SOC; Inverter — Discharge recovery: 1–20 percentage points above over-discharge SOC; Inverter — Generator — start /stop SOC: 1–95 % /35–100 %; Inverter — AC coupling — start /stop SOC: 1–95 % /35–100 %; Inverter — Maximum AC apparent output: 125000 VA; Inverter — Rated backup output: 125000 W; Inverter — Backup peak 10 seconds: 175.0 kVA /10 s; Inverter — Backup peak 200 ms: 200.0 kVA /200 ms; Inverter — Single-unit transfer: <10 ms; Inverter — Parallel transfer up to 6 units: <20 ms; Inverter — Maximum power per phase: 41.66 kW; Inverter — Phase imbalance: 100 %; Inverter — THDv linear load: <3 %; Inverter — MPPT count: 10; Inverter — String count: 20; Inverter — Strings per MPPT: 2; Inverter — Input current per MPPT: 42 A; Inverter — Current per string: 21 A; Inverter — Short-circuit current per MPPT: 60 A; Inverter — Recommended PV array rating: 250 kWp; Inverter — Maximum usable PV power: 250 kW; Inverter — Maximum DC voltage: 1000 V; Inverter — Rated DC voltage: 600 V; Inverter — Start-up voltage: 180 V; Inverter — MPPT range: 150–950 V; Inverter — DC switches: 2; PV1–PV10 and PV11–PV20; Inverter — Battery type: Compatible HV Li-ion system with BMS; Inverter — Battery voltage: 300–950 V; Inverter — Battery ports /BMS count: 2 /2; Inverter — Maximum battery current per port: 100 A; Inverter — Combined battery current: Up to 200 A according to wiring and BMS; Inverter — Battery communication: CAN; Inverter — BMS CAN RJ45: 4 CAN-H /5 CAN-L; Inverter — One battery — one port: BAT1 +BMS1; Inverter — One battery — two ports: BAT1 +BAT2, BMS1 according to diagram; Inverter — Two independent batteries: Each with its own BAT and BMS port; Inverter — Bank settings: Count 1–2, model, connection method, current and SOC; Inverter — Battery operating point 300 V: 90 A /27 kW; Inverter — Battery operating point 400 V: 100 A /40 kW; Inverter — Battery operating point 500 V: 100 A /50 kW; Inverter — Battery operating point 600 V: 100 A /60 kW; Inverter — Family battery-port limit: 65 kW; Inverter — Determining actual battery power: U×I, BMS, port and specific model limits; Inverter — Rated AC current at 380/400 V: 189.9 /180.4 A; Inverter — Maximum grid input current: 250 A; Inverter — Grid voltage range: 304–460 V; Inverter — Generator — maximum input power: 125 kW; Inverter — Generator — current at 380/400 V: 189.9 /180.4 A; Inverter — Maximum efficiency: 97.5 %; Inverter — European efficiency: 97.2 %; Inverter — PV →battery efficiency: 98.2 %; Inverter — AC →battery efficiency: 97.0 %; Inverter — Battery →AC efficiency: 97.0 %; Inverter — Self-consumption: <45 W; Inverter — User interface: 7.0″ LCD /Bluetooth /SolisCloud; Inverter — Battery reserve: Batt saving; default SOC 80%; Inverter — Demand control: Grid Peak Shaving according to mode, SOC and system capability; Inverter — Parallel-system export calibration: 0.5% total capacity according to manual; Inverter — Standard meter: Eastron SDM630MCT V2; Inverter — Standard CTs: 3 ×Acrel AKH-0.66-K-80×40-600A; 600 A /5 A; Inverter — CT ratio: 120; Inverter — CT cable: 5 m /0.8 mm²; Inverter — CT orientation: P1 towards inverter, P2 towards grid; Inverter — CT terminals L1: 1 black (+), 2 purple (−); Inverter — CT terminals L2: 3 orange (+), 4 blue (−); Inverter — CT terminals L3: 5 yellow (+), 6 green (−); Inverter — METER terminals: 21 A /22 B; Inverter — RS485 for Solis PV inverter: 19 A /20 B; Inverter — EMS protocol /RJ45: Modbus RTU; 5 A /4 B; Inverter — ETH interface: TCP/IP; 1 TX+ /2 TX− /3 RX+ /6 RX−; Inverter — Communication glands: COM1/COM2: 7 holes, 6 mm; Inverter — GEN DO1: 11/12; generator start at Grid or Smart; Inverter — GEN DO2: 13/14; generator start at Smart; Inverter — GEN DI1: 5/6; ATS voltage-free contact; Inverter — GEN DI2: 7/8; external 5/12 VDC status signal; Inverter — RSD /EPO: External shutdown through designated terminals according to diagram; Inverter — AC C: External AC-coupled-source relay control; Inverter — SG-DO: Heat-pump interface; Inverter — AC coupling — three-phase PV at Smart: PV inverter rated output up to hybrid rating; Inverter — Dual AC-coupling metering: Meter 001 grid, 002 PV source; Inverter — Parallel unit count: Up to 6 basic layout; 7–10 with external STS according to project; Inverter — Parallel models: Matching model and current ARM/DSP firmware; Inverter — Parallel communication: P-A /P-B; shielded CAT5; Inverter — Total parallel connection length: <60 m; Inverter — System addresses: Primary 1; Secondary 2, 3…; Inverter — DIP termination: Endpoint units ON, intermediate OFF; Inverter — Parallel-system batteries: Assigned to individual inverters with separate battery settings; Inverter — AC length difference above 2 units: ≤10 %; Inverter — Altitude: 3000 m; Inverter — Cooling: Intelligent redundant fan cooling; Inverter — Typical noise: <70 dB(A); Inverter — Surge protection: DC Type II /AC Type II; Inverter — Battery conductors: Cu 25–35 mm²; max.35 mm²; Inverter — Battery terminals: M6; 4.5–5.0 Nm; Inverter — Backup conductors /terminals: Cu 70 mm²; max.95 mm²; M8; 10–12 Nm; Inverter — Smart conductors /terminals: Cu 70 mm²; max.120 mm²; M12; 20–30 Nm; Inverter — Grid conductors /terminals: Cu 95 mm²; max.150 mm²; M12; 20–30 Nm; Inverter — PE conductors /terminals: Cu 50–70 mm²; M10; 10–12 Nm; Inverter — Battery /AC stripping: OT crimp-area length +2–3 mm; Inverter — Reference Grid protection: ≥315 A /≥400 VAC according to design; Inverter — Reference Backup /Smart protection: >225 A /≥400 VAC according to design; Inverter — Maximum Backup AC passthrough: 189.9 /180.4 A; Inverter — 125 kW model combined battery power example: 130 kW; 2 ×65 kW; System dimensions W ×H ×D: 1850 ×2230 ×1600 mm; Power and energy pairing: 125 kW /261.248 kWh. Selection starts with average and simultaneous demand, operating duration and the required reserve. Nominal 261.248 kWh is the starting energy figure; usable SOC, efficiency and auxiliary systems affect delivered energy. Inverter selection follows kW, phases and starting requirements, while battery selection also checks voltage, current and BMS. EverCore uses a fixed engineered site with suitable load-bearing capacity, service access and electrical preparation. This connects energy requirements to a specific configuration instead of a single search keyword.

Batterado — SOLIS-EVERCORE-261-SYSTEM

Markdown — SOLIS-EVERCORE-261-SYSTEM